CE LINK L4701 Video Doorbell

Product Overview

The CE LINK L4701 Video Doorbell offers advanced features for home security and convenience. It supports dual power options (battery or existing doorbell wiring), integrates with an indoor chime, and provides high-resolution video.

Key Features

• 3.6MP resolution (2208x1656) with a 4:3 aspect ratio for excellent clarity.
• Wide 154° diagonal field of view (120° horizontal) with PIR detection up to 4 meters.
• Dual power compatibility: 5200mAh rechargeable battery or 8-24V AC power.
• IPx6 waterproof rating for outdoor installation.
• Supports 2.4GHz Wi-Fi networks only.
• Local TF card storage (up to 256GB) and cloud storage options.
• Built-in microphone and speaker for two-way audio.
• Works with an RF-based indoor chime (paired before shipment).

Basic Parameters

Appearance and Components

The doorbell features a camera lens, LED light ring, microphone, speaker, PIR sensor, doorbell button, and reset button. It also includes terminals for power input.

Component Identification

• [camera-lens] Camera Lens
• [led-ring/power-button] LED Ring / Power Button
• [reset-button] Reset Button
• [doorbell-button] Doorbell Button
• [microphone/speaker] Microphone / Speaker
• [pir-sensor] PIR Sensor
• [ambient-light-sensor] Ambient Light Sensor
• [sd-card-slot] Micro SD Card Slot
• [power-input-terminals] Power Input (Terminals for Existing Doorbell Wires)

In the Box

Please check the following accessories are included:

• Video Doorbell Unit
• Mounting Bracket
• Doorbell Chime
• USB Cable
• USB Adapter (Optional)
• Extension Wires and Wire Nuts
• 3M Double-sided Tape
• Screw Pack
• Detaching Pin

Setting Up the Doorbell

Step 1: Download the App

Download the 'Tuya Smart' or 'Smart Life' App from the Apple [App Store] or [Google Play]. You can also scan the provided QR codes (if available in the original document) to download the app.

Step 2: Connect to the App

1. Sign up for an App account. On the App homepage, tap [add-device-icon] 'Add Device' and select the smart camera (Wi-Fi).

Follow the App prompts to allow necessary permissions for device addition and usage.

Status LED Indicators during Setup:

• [slow-blinking-blue] Slow blinking blue: Ready to connect.
• [slow-blinking-red] Slow blinking red: Disconnected from the internet.
• [solid-blue] Solid blue: Connected to the router successfully.
• [flashing-blue-red] Flashing blue and red alternately: Firmware update in progress.
• [slow-flashing-blue-charging] Slow flashing blue (charging indicator): Battery is charging.
• [solid-blue-charging] Solid blue (charging indicator): Charging completed.

Device Reset

To reset the device, hold the [reset-button] for 5-6 seconds until you hear 'reset successfully'. This is necessary if your Wi-Fi SSID has changed.

Step 3: Add the Device

1. Click 'Next' in the App. Select a stable 2.4GHz [wifi-icon] network (5GHz is not supported) and enter the password.

2. Hold your mobile phone with the generated QR code at a distance of 15-20cm from the camera lens. Do not move until you hear a [sound-indicator] 'Di' sound.

3. Follow the on-screen prompts in the App to complete the device addition.

Important Note: Ensure your mobile phone and the camera are connected to the same Wi-Fi router during setup.

Determine the Power Option

Option 1: Battery Powered

Use this option if your front door lacks existing doorbell wiring. Fully charge the [battery-icon] camera before mounting. Refer to 'Power the doorbell with battery' (page 12 in original document) for details.

Option 2: Doorbell Wire Powered

Use this option if your front door has existing, working doorbell wiring. The doorbell will receive continuous power from the wires. Refer to 'Power the Doorbell with existing Doorbell Wires' (page 15 in original document) for details.

Note: For wired power, use a [5V-1.5A-adapter] power adapter if needed, or connect to existing doorbell wires ([8-24V-ac]).

FCC Compliance Information

FCC Radiation Exposure Statement

[fcc-radiation-statement] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FCC Warning

[fcc-warning] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

NOTE 2

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.