EWAY B502M Wireless Hitch Camera System

Product Overview

This manual provides information for the EWAY B502M Wireless Hitch Camera System, designed to assist with vehicle maneuvering and visibility.

Specifications

Mounting Your Camera

The camera is designed to be mounted on a trailer hitch. Ensure it is securely attached. Refer to warranty information for details on installation and coverage.

[Diagram Description: Figure 1-5 shows the EWAY Hitch Camera securely mounted on a trailer hitch.]

Pairing Your Hitch Camera with Your Smartphone

The EWAY Hitch Camera broadcasts its own Wi-Fi signal. You can connect to it using the RVCamera APP.

For Android Users:

1. Search for, download, and install the "RVCamera" APP from the app store.
2. Ensure your device's Wi-Fi and GPS are both enabled.
3. Connect your device's Wi-Fi to the "IPRO_xxxx" network broadcast by the camera.
4. Open the RVCamera APP and select the camera to view the feed.

[Diagram Description: Figure 1-1 illustrates connecting to the IPRO_xxxx Wi-Fi network via smartphone settings and opening the RVCamera APP. Figure 1-2 shows the RVCamera APP interface after connecting to the IPRO_xxxx network. Figure 1-4 shows a confirmation dialog within the app for pairing.]

For iOS Users:

1. Search for, download, and install the "RVCamera" APP from the app store.
2. Ensure your device's Wi-Fi is enabled.
3. Connect your device's Wi-Fi to the "IPRO_xxxx" network broadcast by the camera.
4. Open the RVCamera APP and select the camera to view the feed.

[Diagram Description: Similar to Android, figures show connecting to IPRO_xxxx Wi-Fi and using the RVCamera APP.]

Using the Camera

Powering ON/OFF: Press and hold the Power ON/OFF button for 3 to 5 seconds until the indicator light changes state. The green indicator light on the front of the camera signifies it is powered ON.

Wi-Fi Connection: You can only connect to one Hitch Camera Wi-Fi address at a time. If you have multiple cameras, you may need multiple devices to view them simultaneously.

[Diagram Description: Figure 1-3 shows the RVCamera APP displaying a live camera feed from the hitch camera.]

Troubleshooting & Connectivity Issues

If you are experiencing issues connecting to your camera:

• Verify your RVCamera APP is up to date.
• Ensure the green indicator light on the front of the camera is solid (powered ON).
• For Android devices, confirm both Wi-Fi and GPS are enabled.
• For iOS devices, confirm Wi-Fi is enabled.
• Check that your device's Wi-Fi is connected to the "IPRO_xxxx" network.
• If problems persist, try restarting the Hitch Camera and reconnecting your device.

If the RVCamera APP is not found, it may be undergoing an upgrade or maintenance. Search for "RVCamera" APP again later.

Software Updates: Download and install software updates via the provided link: http://download.camerarv.com/rvcamera.apk.

FCC Compliance Information

FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.