Shenzhen Powerqi FC81 Wireless Charging Power Bank User Manual

Product Details

The product is a rectangular power bank. The top surface features a circular area designated for wireless charging. On one of the longer sides, there is a USB-A output port and a USB-C input/output port. Near these ports, there are indicator lights (LEDs) to show battery status and charging mode. A power button is also located on the side of the device.

Specification

User Manual

1. Power ON

Connect your device to this product. It will detect your device and power on automatically. Press the power button to turn it on if this product does not power on automatically. Press the power button to turn on this product before you use the wireless charging pad for charging your Qi-enabled device.

2. Power OFF

If no device is connected to this product within 30 seconds, or if this product is under continuous low output, it will automatically turn off. When the product is under low power mode, it will automatically turn off. Long press the power button for 3 seconds to turn it off.

3. LED Indicator Light Status

Click the power button to check the remaining battery. The indicator lights will turn off automatically after six seconds. The LED1 will turn green when the fast charging mode is detected; when there is a fast charging mode, green will flash quickly.

• 4 LEDs on: 75%-100% remaining capacity
• 3 LEDs on: 50%-75% remaining capacity
• 2 LEDs on: 25%-50% remaining capacity
• 1 LED on: 5%-25% remaining capacity
• 1 LED flash: less than 5% remaining capacity

4. Charging this product

Use a power adapter to charge this product. Meanwhile, this product can work with mainstream fast charging chargers for fast charging. When charging, the status of the indicator light is as follows:

5. Discharging this product

• Charging Qi-enabled phones: Place your Qi-enabled phones on the wireless charging pad and press the power button for wireless charging.
• Charging smartphones and tablets: Connect your digital products to this product with the original charging cables. Supports fast charge.

The USB A port of this product can support fast charge when used in isolation, but for security purposes, this product will turn off the fast charge function and only support the ordinary 5V output when two or more devices are charged at the same time.

6. Low Power Alarm

When the battery is less than 10%, the product will enter the low voltage alarm mode. The LED1 begins to flash if you continue to charge other devices. LED1 will blink until shutdown. If there is no access to the charging equipment, it will be out after 30 seconds.

Safety Notes

• Make sure this product is fully charged prior to use.
• Stop using it immediately if the battery is inflated, deformed, or flooded.
• Do not short-circuit the power bank; do not expose this product to extreme temperatures.
• Keep out of reach of children.
• Do not place metal objects or other foreign objects on the wireless charging pad in order to avoid danger.
• Use the original cable and charger for your device when charging it from this product.
• It is recommended to disconnect a fully-charged device to avoid unnecessary battery use.
• When this product enters protection mode (LEDs turn off and power bank will not charge) caused by issues such as a short circuit, use an external charger to replenish the charge and return it to normal operation.
• To prevent damage to the devices, do not use multi-in-one cables to charge multiple devices at the same time.
• Built-in over-temperature protection: When the environment temperature exceeds the normal use temperature range, this product will start over-temperature protection. Move the product to a normal temperature environment and click the button to restore output.
• The battery should be charged at least every three months to avoid shortening the battery life.

Warnings

• This product contains a lithium-ion battery; it is strictly forbidden to disassemble the shell of the product to avoid any damage to the core or other danger.
• Do not squeeze or puncture the mobile power bank so as to avoid electrolyte leakage of lithium-ion battery. Do not place this device in a fire or expose it to temperatures greater than +60°C.

Package Contents

• 1x Portable charge
• 1x USB-C Cable
• 1x Warranty

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device must operate with a minimum distance of 20 cm between the radiator and user body.