SmallRig Cage Adapter for DJI Osmo Pocket 3
Operating Instruction
Welcome
Thank you for purchasing SmallRig's product.
Please read this Operating Instruction carefully before use.
Please follow the safety warnings and all instructions in the operating guide.
Safety Guidelines
- Before installing or removing the cage, ensure no accessories are attached to the cold shoe mount.
- During installation, verify that all camera buttons remain unobstructed.
- Do not use on devices with skins or stickers, as the case may not fit properly.
In the Box
- Cage Adapter for Pocket 3 [quantity 1]
- Guarantee Card [quantity 1]
Product Details
The cage adapter features the following components:
| Part Number | Component Name |
|---|---|
| 1 | Foldable Connector |
| 2 | Silicone Pad |
| 3 | Cold Shoe Mount |
| 4 | 38mm Arca-Swiss Mount |
| 5 | 1/4"-20 Locating Hole |
| 6 | Action Quick-Release Mount |
| 7 | Lanyard Hole |
| 8 | Locking Latch |
Diagram shows a detailed view of the SmallRig cage adapter with numbered components.
Installation Instructions
Step 1: Open the Cage
Press the locking latch to open the cage.
Diagram shows a hand pressing a latch on the cage adapter to open it.
Step 2: Attach the Camera
On a flat surface, align the cage with the device's base. Then, insert the device with its front facing the cage's SmallRig logo side.
Diagram shows the DJI Osmo Pocket 3 being aligned with the base of the cage adapter and inserted, with the camera's screen/front facing the side with the SmallRig logo.
* Note: The camera body is not included and must be purchased separately.
Step 3: Secure the Cage
Press both the front and rear of the cage until it is fully seated.
Diagram shows arrows indicating pressure being applied to the front and rear of the cage once the camera is inserted, ensuring a snug fit.
* Note: The camera body is not included and must be purchased separately.
Step 4: Complete Installation
Engage the locking latch to complete the installation.
Diagram shows the locking latch being pressed or secured to lock the camera in place within the cage.
* Note: The camera body is not included and must be purchased separately.
Installation Display
Examples of how the cage adapter can be used:
- Handheld Shooting: The cage adapter attached to the DJI Osmo Pocket 3 is shown being held by hand for stable filming.
- Bike-Mounted Shooting: The cage adapter attached to the DJI Osmo Pocket 3 is shown mounted securely on a bicycle handlebar, enabling action shots.
Specifications
| Product Dimensions | 1.8 × 0.9 × 1.6 inches (46.5 × 22.4 × 40.3 mm) |
| Product Weight | 1.0 ± 0.2 oz (27.5 ± 5.0 g) |
| Material(s) | Aluminum Alloy, Silicone |
Specifications are subject to change without prior notice. Please refer to the physical product for the most up-to-date information.
Manufacturer Information & Compliance
Manufacturer: Shenzhen Leqi Innovation Co., Ltd.
Address: Rooms 101, 701, 901, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Manufacturer Email: support@smallrig.com
Consignor: Shenzhen LC Co., Ltd.
Address: Room 201, Building 4, Gonglianfuji Innovation Park, No. 58, Ping'an Road, Dafu Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.
Standard: GB/T 26572-2011
Compliance Marks: RoHS, CE
Recycling Information: Please separate waste elements before disposal. (Includes French text: "Séparez les éléments avant de trier")
Origin: Made in China | 中国制造
