PIXIE Contact Transceiver

Product Overview

The PIXIE Contact Transceiver (#PC100CS-R-BTAM) is a smart device designed to monitor the open and closed status of gates, doors, and windows using wired contact sensors. It connects wirelessly via Bluetooth® to the PIXIE system.

Basic Operation:

• 1 Click: Sets the device to Armed mode, monitoring contact sensor status and sending notifications to the system upon status changes.
• 4 clicks: Manual pairing.
• 9 clicks: Resets the device.

The Red and Green LED indicator represents the armed status of the device.

Applications

This device provides sensor inputs for indicating status and performing actions based on sensor contact closure status. It can be used to connect to:

• SMOKE DETECTORS via dry contacts with PUSH Notification on Event.
• Any dry contact input from any device.

What's in the box

• 1 x Translator
• Installation instructions

Accessories

Input sensors are available separately. See page 2 for details on related products:

• Flush mount Contact Sensor (#CSF21BTP)
• Roller Door Contact Sensor (#CSR41BTP)
• Metal Door Contact Sensor (#CSM41BTP)
• PIXIE Gateway G3 (#SGW3BTAM)

Features

• Works with wired contact sensors for gates, doors, or windows, to monitor open & close status from any manufacturer.
• PIXIE offers three types of sensors: metal for garage doors, plastic for metal doors, and small recessed for wooden doors.
• Connects with one set of contact sensor to monitor one gate/door/window status. It can also connect any dry contact input from any device.
• Features customizable PUSH Notifications (New 2025) delivered via the PIXIE PLUS App when status changes occur.
• Includes an in-built button for easy setup and control.
• One RGB LED indicator reflects different working modes and gate/door/window status.

Electrical Specifications

*** Depending on building materials and construction.

Wiring Diagram

The diagram shows the wiring connections for the PIXIE Contact Transceiver and a typical contact sensor. It illustrates the connection points labeled 'A' and 'N' on the transceiver and the 'Contact Sensor' with terminals 'Z' and 'G'.

Wiring Diagram for PIXIE Contact Transceiver with Contact Sensor.

Contact Sensor Details

Flush Mount Contact Sensor (#CSF21BTP)

Contact Mode: Normally closed (N.C.)
Operation Gap: >20mm
Operation Voltage: <100V DC
Operation Current: <500mA
Dimension: 11*16.8mm
Cable Length: 500mm
Installation Method: Recessed
Cut-out: 10mm

Roller Door Contact Sensor (#CSR41BTP)

Contact Mode: Normally closed (N.C.)
Operation Gap: 40mm
Operation Voltage: <100V DC
Operation Current: <500mA
Reed Switch Dimension: L106 W48 H10 mm
Magnet Dimension: L88 W20 H21 mm
Cable Length: 650mm
Installation Method: Surface mounted

Metal Door Contact Sensor (#CSM41BTP)

Contact Mode: Normally closed (N.C.)
Operation Gap: >40mm
Operation Voltage: <100V DC
Operation Current: <500mA
Dimension: L50*W18 H10 mm
Cable Length: 500mm
Installation Method: Surface mounted

PIXIE Integration

PIXIE products fit into a wide range of Australian wall plates, offering a seamless integration into your home's aesthetic. The PIXIE system allows for advanced home automation functions by using status changes from the contact sensor as triggers for logic control.