FLOS Zeppelin 1 Pendant Lamp

Product Overview

The FLOS Zeppelin 1 is a pendant lamp designed by Achille Castiglioni. This document provides essential instructions for its correct installation, safe use, and maintenance.

Safety Instructions and Warnings

WARNING: The safety of this fitting can only be guaranteed if these instructions are observed, during both installation and use. Please retain these instructions for future reference.

General Precautions:

• Always ensure the power supply is switched off before installing or performing any maintenance on the appliance.
• The appliance must not be modified or tampered with in any way. Any modification may compromise safety and render the appliance dangerous. FLOS disclaims all responsibility for modified products.
• If the external flexible cable is damaged, it must be replaced by FLOS or by qualified personnel to avoid any danger.
• The symbol ⚠️ marked on the appliance indicates the need to use self-protected bulbs.
• For safe and correct operation, this appliance must be connected to an efficient grounding system.
• The symbol ♻️ shown on the device indicates that the product must be disposed of separately from urban waste.

Installation Guide

Follow these steps carefully to ensure proper installation. Ensure the ceiling fixing is compatible with the weight of the appliance (approximately 15 Kg).

Assembly Sequence:

Detailed Steps (based on diagrams):

1. Ceiling Preparation: Ensure the ceiling fixing is appropriate for the appliance's weight (~15 Kg). (Refer to Fig. 1E / Fig. 1U)
2. Wiring: Connect the wires to the terminal block. The wiring configuration is as follows:
   • L (Phase): BLACK / NOIR / NEGRO
   • N (Neutral): WHITE / BLANC / BLANCO
   • Earth: GREEN / VERT / VERDE
   (Refer to Fig. 2E / Fig. 1U / Fig. 20)
3. Wire Trimming: If necessary, trim the wires to the appropriate length. (Refer to Fig. 3E)
4. Mounting Bracket: Secure the mounting bracket to the ceiling. Ensure wires are routed correctly. (Refer to Fig. 4E)
5. Lamp Body Attachment: Lift the lamp body and attach it to the ceiling mounting bracket. (Refer to Fig. 5E)
6. Diffuser Assembly: Assemble the fabric diffuser onto the internal frame.
   • Step 1: Place the internal frame.
   • Step 2: Attach the fabric diffuser by clipping it onto the frame, ensuring it is securely fastened. A warning symbol ⚠️ indicates caution during this step.
   • Step 3: Secure the diffuser by twisting the central locking mechanism until a checkmark ✔️ is visible, confirming it is locked in place.
   (Refer to Fig. 7)
7. Final Assembly: Complete the assembly of the lamp. (Refer to Fig. 8)

Technical Data

Cleaning Instructions

To clean the appliance, use only a soft cloth. For more resistant dirt, dampen the cloth with water and soap or a neutral detergent.

Attention: Do not use alcohol or other solvents.

Disposal Information

This product must be disposed of separately from urban waste, following local regulations for differentiated waste disposal. (Refer to symbol ♻️)

External Links

For more information, visit the official FLOS website: flos.com