Manual de utilizare

1. Descriere produs

Termostatele din seria BOT sunt incorporate cu ecran digital LCD, si sunt dezvoltate in conformitate cu cerintele pietei. Aceasta serie este usor de operat si detine functii complete. Termostatul poate fi utilizat pentru controlul centralelor termice pe gaz, valve motorizate, valve electrice, etc.

2. Parametrii tehnici

3. Interfata utilizator

The user interface diagram shows the thermostat display and control elements. Key elements include:

• Wifi Symbol: ? [Wi-Fi indicator]
• Heat Symbol: ? [Heating indicator]
• Child Lock: ? [Child lock indicator]
• ROOM: Displays current room temperature.
• WEEK: Indicates the current day of the week.
• Display Area: Shows current temperature (e.g., 28.0°C), set temperature (e.g., 30.0°C), and programming schedule (e.g., 0-3, 6-9, 12-15, 18-21).
• Day/Period Indicators: Shows current day (1-7) and programmed periods.
• Set Button: ⚙️ [Set button] for adjusting parameters.
• Tem, Time, Parameter Set: Indicates the current setting mode.
• Time Set: ⏰ [Time setting button]
• Manual Mode / Programmable Mode: Indicates the operating mode.
• When power-on, press 5 seconds to enter period program: Instruction for entering programming mode.
• On/Off Button: ? [Power button]
• Up/Down Arrows: ⬆️⬇️ [Increase/Decrease buttons] for adjusting values.
• Mode Button: ? [Mode selection button]

The diagram also illustrates a "Six Periods (In/Out Room)" schedule, showing time blocks for heating periods.

4. Setarea numarului de ordine

Each thermostat has a receiver, and both should have the same order number. If they are mixed during installation, the order number can be set using the following method:

1. For the first step, press the "diminuare" [decrease] button, then the "pornire" [power/on] button, followed by the "mod" [mode] button to set parameters.
2. Adjust values until the correct parameters are displayed.
3. For the second step, after SN1 appears, press "marire" [increase] or "diminuare" [decrease] to change the number.
4. The display will show SN2-SN6 in order.

The document shows a barcode with the sequence "1 4 4 9 1 2 3 4 5 6 7 8 4 3" and labels "sn1 sn2 sn3 sn4 sn5 sn6 CHK". This is likely an example or a reference for the order number setting.

Advanced Settings Note: Using advanced settings, SNP must be set to 01, then SN must be set following 4 steps.

The document shows visual representations of button presses:

• A screen labeled "Power Off State".
• An instruction to press "diminuare" [decrease].
• An instruction to press "pornire" [power/on].
• An instruction to press "mod" [mode] to set parameters.
• A screen showing "88 501" with arrows indicating adjustment. Text: "Modifica pana ajungi la parametrii corecti" [Modify until you reach the correct parameters].
• A screen showing "88 502" with arrows indicating adjustment. Text: "Modifica pentru a schimba numarul" [Modify to change the number]. Instruction: "Va Aparea IN ORDINE SN2-SN6" [SN2-SN6 will appear in order].

CHK Code: All SNs are correct. The CHK code is the same.

5. Specificatiile modelului

6. Diagrama de cablare

The wiring diagram illustrates the connections for the thermostat. It shows three terminals:

• NC (Normal Close): Connected to "Close".
• COM (Common): Connected to "COM".
• NO (Normal Open): Connected to "OPEN".

Definitions:

• NC - normal inchis [normally closed]
• COM - comun [common]
• NO - normal deschis [normally open]

ATENTIE! The wire thickness for thermostat installation must be between 1.5-2.25 mm! Please connect the wires to the thermostat according to the wiring diagram.

7. Instructiuni de utilizare

1. Setarea ceasului

Press the "seteaza ceas" [set clock] button to set the current hour, minute, and day of the week. Press the "buton marire" [increase button] or "buton diminuare" [decrease button] to adjust accordingly.

2. Setarea temperaturii

Step 1: Programming Mode

Press and hold the "buton meniu" [menu button] to enter programmable mode. "LOOP" and digits "12345" will be displayed. "12345" displayed next to the week indicates that 5 days have been programmed for thermostat operation.

• Pressing "buton marire" [increase button] once displays "123456" (Monday-Saturday).
• Pressing "buton marire" [increase button] twice displays "1234567" (Monday-Sunday).

Step 2: Setting Time and Temperature for Periods

When the screen displays "12345", "123456", or "1234567", press the "buton meniu" [menu button] to set the temperature. Press the "buton ceas" [clock button] to set the time. To make changes or save, press "buton marire" [increase button] or "buton diminuare" [decrease button].

Temporary Manual Mode:

ATENTION!!! While auto-control mode is active, temperature can be modified by switching to temporary manual mode. Temporary manual mode is used when the thermostat is in auto-control (programmed) mode. In this case, press the "buton marire" [increase button] or "buton diminaure" [decrease button] to modify the temperature. After changing the period, the thermostat will automatically return to its auto-operation program.

Setting Operating Periods:

First, press the "buton meniu" [menu button], then press the "buton ceas" [clock button] to change options, including the time within the period.

Setari avansate (Advanced Settings)

To enter advanced settings mode, press and hold the "setare ceas" [set clock] button, then press the "oprire/pornire" [off/on] button. Afterwards, press the "mod" [mode] button to set each function individually.