Altitude 500 Pro Tower Fan

Product Overview

Dimensions: Height 117cm x Width 34cm

Length of mains lead: 1.5m

• Air circulation tower fan with 4 DC fans that can be manually rotated for different directions of airflow (180-degree range).
• Slim, space-saving design.
• Quiet motor.
• Remote control storage slot on the top of the fan.
• LED display.
• Temperature control.
• 12-hour timer.
• 3 speed settings: Low, Medium, High.
• 3 wind modes: Normal, Nature, and Sleep.

Technical Details

Power Supply: 220-240V ac, 50/60Hz

Power Consumption: 25W

General Warnings

• This device is intended for home use only for ventilating rooms. Any other use is considered inappropriate and dangerous. The manufacturer is not responsible for damage caused by inappropriate use or unauthorized repairs.
• The appliance is suitable for household and similar applications such as staff kitchens, offices, farm houses, hotels, motels, bed and breakfast environments.
• Do not touch the appliance with wet hands or feet.
• Do not insert tools or fingers into the grille protecting the blades.
• Children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, may use the appliance if given supervision or instruction on safe use and understanding the hazards. Children must not play with the appliance. Cleaning and maintenance by children require supervision.
• Keep the appliance out of children's reach.
• When using electric appliances, always observe basic safety precautions to avoid risks of fire, electric shock, and physical injury.
• Do not use the appliance if it is not operating correctly or appears damaged. Contact a qualified technician if in doubt.
• Ensure the appliance is working correctly; if not, turn it off and have it checked by a qualified technician.
• Always unplug the appliance before assembling, disassembling, or making adjustments.
• Do not move the appliance while it is operating.
• Unplug the appliance when not in use.
• Do not use the device at room temperatures above 40°C.
• Switch off the appliance before moving it.
• Do not leave the device exposed to weather (sun, rain, etc.).
• Do not pull on the cord to disconnect the plug from the socket.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

Installation

1. After removing packing materials, check the Tower Fan for integrity. If unsure, do not use and seek professional help. Keep packing materials (plastic bags, polystyrene foam, nails, etc.) out of reach of children as they can be sources of danger.
2. Before connecting, check that the voltage values on the data plate correspond to the electricity supply network.
3. The power socket must be easily accessible for quick plug removal in case of emergency.
4. Do not place the appliance near sinks or other containers of liquids (maintain a minimum distance of 2 meters) to avoid the risk of it falling in.
5. Keep the fan away from fabrics (curtains, etc.) or unstable materials that could obstruct the air intake grille. Ensure the front is clear of unstable materials (dust, etc.).
6. Make sure the electric cord is not touching rough, hot, or moving surfaces, and is not twisted or wrapped around the appliance.
7. Stand the appliance on a horizontal, flat surface or table. Do not stand on an inclined plane.
8. In case of breakdown or poor operation, turn the fan off and ask for professionally qualified help.

Assembly

Attention: The fan can only be used if complete with the support base. Always unplug the appliance before assembly.

1. Snap the two parts of the base together. (Diagram shows two interlocking base pieces forming a circular stand.)
2. Attach the tower fan onto the assembled base and secure with 6 screws.

Operation

The fan can be operated by the control panel located on the top of the fan or by remote controller.

Control Panel & LED Display:

1. Plug the fan into a standard domestic socket. The LED screen will display the current room temperature. ?️

2. Press the ON/OFF ? button; the fan will start running at HIGH speed.

3. Press the SPEED ? button to select the desired level: Low, Medium, or High. The selected speed level is displayed on the LED screen.

4. Press the MODE ☀️?? button to set the fan mode: Normal, Natural, or Sleep. The selected mode is displayed on the LED screen.

5. Press the OSC ? button to allow the fan to oscillate the wind direction. To stop oscillation, press the OSC button again. The maximum oscillation angle is 75 degrees.

6. Press the TIMER ⏳ button to set the desired auto power-off time. The timer ranges from 1 to 12 hours, with 1-hour intervals.

Note 1: The LED display becomes dark after 5 minutes of inactivity.

Note 2: This tower fan includes 4 DC fans. Each fan body can be rotated manually by hand approximately 90 degrees to the right and left, providing a total airflow direction adjustment of 180 degrees.

Remote Controller

1. The remote controller is stored at the top of the fan. ?️
2. Before using the remote controller, remove the plastic protection from the battery.
3. The remote controller battery is a CR2025 type (included).

Remote Buttons: SPEED ?, MODE ☀️??, TIMER ⏳, ON/OFF ?, OSC ?.

Cleaning and Maintenance

Attention: Unplug the appliance from the socket before normal cleaning.

• Clean the body with a soft, slightly damp cloth. Do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid. If this happens, do not put your hand in the liquid; first remove the plug from the socket. Carefully dry the appliance and ensure all electrical parts are dry. If in doubt, seek professional help.
• It is essential to keep the motor's air holes clear of dust and lint.
• If the fan will not be used for long periods, it must be protected from dust and humidity. Storing it in its original packaging is recommended.

Batteries

• Keep batteries away from children and pets.
• Do not mix used and new batteries.
• Remove batteries if the appliance is left for long periods.
• Never dispose of batteries in a fire.
• Spent or expired batteries must be properly disposed of and recycled in compliance with local regulations. Contact your local authority for detailed information.
• Follow the battery manufacturer's safety, usage, and disposal instructions.

Plug Wiring (UK & Ireland)

This appliance is fitted with a moulded BS 1363 13-amp plug, which includes a 3-amp fuse.

• If the fuse needs replacement, only use fuses approved by ASTA or BSI to BS1362.
• If a fuse cover is fitted, it must be refitted after changing the fuse. If the fuse cover is lost or damaged, the plug must not be used.
• Spare fuse holders and fuses are available from electrical outlets.
• If the socket outlets in your home or office are not suitable for this product's plug, the plug must be removed and disposed of safely. Attempting to insert the plug into the wrong socket is likely to cause an electric hazard.

Disposal

• Coopers of Stortford uses recyclable or recycled packaging where possible.
• Please dispose of all packaging, paper, cartons, and packaging in accordance with your local recycling regulations.
• Plastics, polybags: Contains the following recyclable plastic (Code & Symbol: 7 OTHER). Commonly used for ABS, CD's, crisp packets, various flexible packaging, baby bottles, sunglass lenses. Note: Not often or widely recycled. ♻️
• At the end of the product's lifespan, please check with your local council's authorized household waste recycling centre for disposal.

Company Information

The Enterprise Department

UK Head Office: 11 Bridge Street, Bishop's Stortford, CM23 2JU

Tel: 0844 4824400* | Fax: 01279 756595

Website: www.coopersofstortford.co.uk

EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France

Tel: (+44) 1279 701269

*UK Calls cost around 7 pence per minute plus your telephone company's network access. Please check with your telephone supplier.