Techly LED Desk Lamp with Wireless Charger

Model: I-LAMP-DSK10

Dear Customer, thank you for choosing our LED desktop lamp with wireless charger. Please read this instruction carefully before use to fully enjoy the advantages of this product.

Cautions

Please use DC12/2A power adapter. If the power adapter or its external flexible cable is damaged, it only can be replaced by the manufacturer, agent, or by qualified technician.
This product is for indoor use only.
When the lamp is on, please do not look directly to light source.
This product may be turned on or off under strong electromagnetic interference.
To prevent lamp pole from being damaged, please do not bend the pole continuously and quickly.
The light source is irreplaceable; when the light source reaches its end of life, the whole lamp shall be replaced.
To prevent the lamp from toppling, please put it on proper position. A tilt which is more than 6 degrees is not recommended.
At night, it is recommended to set colour mode to nature light or warm white light.

Product Illustration

The product illustration shows the main components of the LED desk lamp:

Lamp Pole: The adjustable arm of the lamp.
Base: The stable bottom part of the lamp.
Power input port (DC 12V): Where the power adapter connects.
Wireless charging indicator: An indicator light for the charging status.
LED lamp: The light source at the top.
Wireless Charging Area: The designated spot on the base for wireless charging.
Timer button: A button to activate the auto-off timer.
ON/OFF button: A button to turn the lamp on and off.
Color mode selection button: A button to cycle through different light color modes.

Main Features

Power supply: Input AC200-240V 50/60Hz, Output DC12V/2A
Rated power of product: 21W
Rated power of lamp: 5.5W
Dimming type: Sensor touch for ON/OFF, stepless dimming
Timer: Lamp will turn off automatically after 40 minutes.
Light source: 36pcs High efficiency semiconductor LED
Three color modes: Natural light, Cool light, Warm light
Color temperature: 3000K/4000K/5700K
Color rendering index: Ra≥90
Luminous Flux: 320LM
Wireless charging output: 15W (MAX)

Operating Instructions

Lamp operation: Place the lamp on a table or platform. Connect the power adapter to the power input port and the other end to a power outlet. Touch the [ON/OFF-button] to switch the lamp on. The default light is natural. Touch again to switch off the lamp. Short touch the [M-button] to cycle through the different light modes (natural light → cool light → warm light).
Brightness adjustment: Press and hold the [ON/OFF-button] to adjust the brightness of the LED lamp.
Timer function: Press and hold the [timer-button]. The light flashes twice to indicate the timer is active, and the LED lamp will turn off automatically after 40 minutes. If you press and hold the [timer-button] again, the count-down will restart. The LED lamp will be turned off automatically after 40 minutes.

Wireless Charging Instruction

Wireless charging function: Plug in the lamp and align a mobile phone with wireless charging capability (or a wireless charging receiving module) correctly with the charging zone.
- When the wireless charging indicator is green, it indicates that the mobile phone is on wireless charging state.
- When the wireless charging indicator is red and always on or flashing, it indicates that the wireless charging is not working properly.
- When the wireless charging indicator is red and green (some mobile phones do not support this function), it indicates that the mobile phone is fully charged.
In order to achieve the best effect and higher charging efficiency, align your phone correctly with the charging zone.
When the lamp is turned on, the wireless charging power is around 10W.

Package Contents

LED desk lamp with wireless charger x1pc
Power adapter x1pc
User’s manual x1pc

Compliance and Information

In compliance with EU Directive WEEE, this product is marked with a symbol indicating that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products in compliance with the WEEE directive, otherwise contaminative and hazardous substances can pollute the environment. [WEEE-compliant symbol]

With the CE sign, Techly® ensures that the product is conformed to the basic European standards and directives. The full text of the EU Declaration of Conformity is available on the WWW.TECHLY.COM website in the product page. [CE-certified symbol]

For more information, visit: WWW.TECHLY.COM