Instruction Manual for aultop models including: ATMS2001 WiFi Smart Timer, ATMS2001, WiFi Smart Timer, Smart Timer, ATMS2001 Timer

Operating Instruction printing 2001 20A

ATMS2001 20A

Index of /Images/spec

Technical

Automation Products

PDF preview unavailable. Download the PDF instead.

ATMS2001 20A
WiFi Smart Timer
1. Download and install Mobile App: Connect your phone e to Iocal Wi-Fi first.
Use your phone to scan the QR code below to Download and install the App.

Operating Instructions
2. Register Account

WiFi Smart Timer
4.Set scheduled programs.

Operating Instructions

3. Add New Device
Connect the Device with the mains supply(100-250VAC), for the connection diagrams see section 4.
Press and hold the button for about 5 seconds until the Green LED light blinks fast.

Click Add Dev Ice

* After holding the switch for 5 seconds, if the LED light is red, press the switch again and you will see the green light blink.
4. Count d own timer

1

the homepage

set Hour and Min.

Click "Timer" in

5.

.

Input Wi-Fi password

6. Random Function

Click "Timer" in
7. Delay Off (When Load Is Turned On Via App/Manual)
2
Click "Timer" in

WiFi Smart Timer
9.Astronomical Function set Sunrise time

Operating Instructions

WiFi Smart Timer
13. Share Device

Operating Instructions

10.Astronomical Function set Sunset time

11. Modify Device Icon

Click this icon

Click this icon in

Click "Icon"

the upper right corner the upper right corner.

12.Modify Device Name

14. Create Group

Click "Share Device" Set the time

Click "Add Sharing"

Input cellphone number. and click "Done".

14. Specification
· Rated Voltage: 100-240VAC 50-60 Hz · Rated Current: 20A 250VAC (Cos= 1)
· Contact Configuration: 1NO(SPST-NO) · Wi-Fi Frequency: 2.4GHZ · Mounting: DIN RAIL 35 mm (EN 60715) · Ambient temperature range: -10°C... +60°C · Can set 30 ON/OFF programs per day or per week.
·· Count down time, from 1 Min to 23 hours 59 Mins. If the product is disconnected from the network, the timer retains all programs set up by Mobile App and works
according to the set programs.
· With memory function, When the product contact is in the close state, after a power failure, the product contacts keep the close state.
· Can be controlled by tactile switch from terminal A1 and A2 · Can be shared with 20 users by Mobile App. · With Bluetooth function, when the WIFI signal is disconnected for 5 minutes, you can use the mobile APP to
control the on and off of the product through Bluetooth.

Click this icon in upper right corner

Click this icon in the upper right corner.

Click "Name"


Microsoft Word for Microsoft 365