Enzo Battery Replacement Guide

Battery Replacement Steps

1. Step 1: Remove Screws

   Illustration shows a screwdriver being used to remove four screws from the back of the device.

2. Step 2: Open Device

   Illustration shows the back cover being lifted open.

3. Step 3: Remove Old Battery

   Illustration shows a coin-cell battery (CR2032*) being removed from its compartment.

4. Step 4: Wait 60 Seconds

   Illustration shows a timer icon and '60 s.' indicating a 60-second wait.

5. Step 5: Insert New Battery

   Illustration shows a new CR2032* battery being inserted into the compartment, noting correct polarity.

6. Step 6: Close Device

   Illustration shows the back cover being placed back onto the device.

7. Step 7: Secure Screws

   Illustration shows the four screws being reinserted and tightened.

8. Step 8: Test Device

   Illustration shows the device with 'TEST!' indicated, suggesting a test function.

Important Note on Battery

* Only use high quality battery, CR2032, provided by Careium.

Safety Information

Battery replacement may be performed in accordance with the instructions. Only use recommended battery type as stated in this manual (CR2032*). CAUTION - Risk of explosion if battery is replaced by an incorrect type.

Environmental Information

This product complies with the requirements of the EU directive 2006/66/EC (Batteries) and 2012/19/EU (WEEE) and should not be disposed of with other household waste. Always recycle your used electronic products, batteries, and packaging materials to dedicated collection points.