River of Goods Luminary Assembly Instructions
Item: 21658
Note: The diagram illustrates the installation of your new luminary. This is a representative drawing and is not intended to match the style of your luminary.
Assembly Instructions
- Place all parts on a flat smooth surface and start the Lamp assembly.
- Lamp Installation
CAUTION - Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock.
- Install the mounting bracket to the ceiling outlet box using the provided screws.
- Wiring: using the provided Wire Connectors connect the Lamp BLACK wire to your installation POSSITIVE wire, then connect the Lamp WHITE wire to the NEUTRAL. Lastly connect your house Ground wire and the Lamp BARE GROUND wire to the GROUND SCREW located in the Mounting Bracket.
- Gently push the wiring inside the electrical box, then lift the lamp from the mounting bracket and using the two Canopy screws attach it to the mounting bracket.
- Install the BULB(s) (Not Included)
CAUTION - Refer to the wattage caution label located near the lamp holder for maximum wattage - do not exceed the maximum wattage.
E26 Type A - MAX 40W (Not included)
E26 CFL - MAX 12W (Not included)
Care Instructions
Use only a soft cloth: do not use any chemicals or abrasive cleaners.
MADE IN INDIA
riverofgoods.com
[UL certified symbol]
Diagram Description
The diagram shows the components for assembling a luminary. It includes an electrical box, mounting bracket, plastic anchors, ground wire screw, canopy screws, canopy, bulb socket, and lamp shade. The assembly process involves connecting wires from the luminary to the house wiring and securing the luminary to the mounting bracket.
