Xtorm XG2PS05x Power Shot 5.000

Specifications

• Capacity: 5.000mAh Li-poly / 18.5Wh
• Output 1 (Flip-out USB-C): 20W
• Output 2 (USB-C): 20W
• Input (USB-C PD): 18W
• Dimensions: 80x37x26.5 mm
• Weight: 101 grams
• Included: 1x USB-C PD cable, 1x Manual

Note on Multiple Outputs: When using 2 outputs simultaneously, the shared output is 12W.

Charging Your Device

Follow these steps to charge your device:

1. Flip up the USB-C plug.
2. Directly plug the flip-up USB-C plug into your device. Charging will begin automatically.
3. Alternatively: Connect the USB-C end of the charging cable to the USB-C output of the Power Bank and the other end to the input of your device.

Important: Charging some devices may require a different charging cable than the one supplied, such as an Apple Lightning® or a Micro USB cable.

Recharging the Power Bank

To recharge the Power Bank:

1. Connect the USB-C end of the charging cable to input 2 of the Power Bank and the USB end to a wall charger.
2. For the fastest charging possible, use a 20W USB-C charger. This will fully recharge the Power Bank within 1.5 hours.

LED Power Indicator

The LED lights indicate the remaining battery level:

• Press the Power Button once to display the battery level via the LED display.
• Each lit LED light indicates 20% remaining energy.
• At 5 lit lights, the Power Bank is fully charged.

In the Box

• XG2PS05x Power Bank
• USB-C PD Cable
• Manual

Safety Warnings

General Precautions

• Do not drop, disassemble, or attempt to repair the charger yourself.
• Avoid exposure to water or high humidity.
• Do not expose to any heat source.
• Keep out of reach of children.
• Do not use in the presence of flammable gas.

Warranty Information

• The warranty will lapse in the event of improper use.
• Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.

Product Features

• 1. Temperature Control: Provided with a temperature control chip that prevents overheating.
• 2. Overload Protection: Protects both the internal battery as well as the battery of the attached device from overcharging.
• 3. Secured Power Management: Automatically picks the correct charging speed and efficiently divides power between attached devices.
• 4. Short Circuit Protection: Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short circuit damage.
• 5. A-Class Battery Cells: Uses the best battery cells for fast charging and safety.
• 6. High Efficiency: Built to power devices efficiently, ensuring minimal energy loss during charging.