Vadsbo DIM50-24 Dimmable LED Driver
Important Safety Information
Warning! High voltage. Risk of electric shock. The installation should only be carried out by an authorised electrician.
Technical Specifications
| Parameter | Value |
|---|---|
| Article Number | V-36D1102-050Y |
| Input Voltage | 220V-240V |
| Input Frequency | 50Hz |
| Input Current | <0.3A |
| Input Power | <60W |
| Stand-by Power | 0.97W |
| Efficiency | ≥85% |
| Maximum In-rush Current | 1A (210μs) |
| Inrush Current | <75A |
| Output Voltage and Precision | 24V±5% |
| Output Current Range | 0.8-2.08A |
| Dimming Mode | Leading edge-/trailing edge dimming |
| Dimming Range | 20%-90% |
| Power Factor | 0.9 |
| Operation Temp | -20-45°C |
| Relative Humidity | 15%-90% |
| Max Case Temp | 85°C |
| Lifetime | 30,000 Hours |
| Working Noise | <35dB |
| Size | 177x57.8x21.8mm |
| Case Material | Plastic |
| Insulation Class | Class II |
| IP Grade | IP20 |
| Input Cables Dimension | 2x0.75mm² |
| Output Cables Dimension | 2x0.75mm² |
| Output Cables Length | 2m Max |
| Certifications | IEC61347-1, IEC61347-2-13, EN61000-3-2 Class C, EN55015, EN61547 |
Wiring Diagram and Installation
Wiring Diagram: The diagram illustrates the connection for the LED POWER SUPPLY unit. Input terminals are labeled L (Live) and N (Neutral). Output terminals are labeled SEC (+ and -). The unit is designed for connection to a phase-cut dimmer (leading edge/trailing edge dimming).
Wire Preparation: Approximately 7-8mm of wire should be prepared for connection.
Dimmer Compatibility: Compatible with phase-cut dimmers (leading edge/trailing edge).
Physical Dimensions
The unit measures approximately 177mm (Length) x 57.8mm (Width) x 21.8mm (Height). Detailed measurements are available in the technical drawing.
Manufacturer Information
Brand: Vadsbo
Address: Hilma Anderssons gata 15, 421 31 Västra Frölunda
Phone: +46 (0)31-23 56 00
Email: info@vadsbo.net, order@vadsbo.net
Website: www.vadsbo.net
Document Version: 4 20221208
