Thor Broadcast H-PCKT-MOD Encoder Modulator User Manual
Model: H-PCKT-MOD
Year: 2018
Brand: Thor Broadcast
Manufacturer: Thor Fiber
Contact: Tel: (800) 521-8467 | Email: sales@thorfiber.com | Website: http://www.thorbroadcast.com
A Note from Thor Broadcast about this Manual
Intended Audience
This user manual is intended for individuals who need to use, integrate, and install the Thor Broadcast H-PCKT-MOD product. Some sections may require prior knowledge of electronics and broadcast technologies.
Disclaimer
No part of this document may be reproduced without the written permission of Thor Broadcast. Content is subject to revision without notice. Thor Broadcast is not liable for any errors or damages resulting from the use of this document.
Copy Warning
This document contains confidential information and is intended solely for owners of the product. It cannot be copied, modified, or translated without prior written authorization from Thor Broadcast.
Product Overview
The Thor Broadcast H-PCKT-MOD is a handheld pocket modulator designed to feed audio-video signals via HDMI or AV connector into an existing coaxial cable network. It accepts signals from sources like surveillance cameras, media players, satellite receivers, or computers, and outputs them via RF modulation, making them available to multiple receivers over long distances.
Button Layout and Connections
The H-PCKT-MOD features the following ports and controls:
- HDMI: HDMI Signal input.
- CVBS/CC: CVBS or Signal input.
- DC: Power Supply 12V DC 1A input.
- Ethernet: RJ45 connector for service.
- Micro USB: PC connector for service & update.
- RF Out: RF Signal output.
- RF In: RF Signal loop-through input.
- Power LED: Indicator light when the device is powered on.
- HDMI LED: Indicator light when HDMI input is active.
- CVBS LED: Indicator light when CVBS input is active.
- Control Buttons: Buttons for menu functions.
- OK/Return: Enter & Escape buttons for menu navigation.
The front panel displays settings and status information on a screen. It includes input indicators for POWER, HDMI, and CVBS, and buttons for navigation and selection.
Safety Instructions
- Ensure the DC adaptor is securely plugged in before operation. Do not use if the power supply shows tears or obstructions.
- Install the unit in a dust-free, dry environment, away from vapors, water, or moisture. Protect from direct sunlight and heat sources (above 50°C). Ensure ventilation slots are unobstructed.
- Avoid short circuits caused by improper handling, external influences, liquids, incorrect connections, or overvoltage, as these are excluded from warranty.
- Follow relevant installation standards, regulations, and guidelines, and handle the unit with care to ensure its longevity.
Primary Use
The Thor Broadcast H-PCKT-MOD is a handheld pocket modulator used to inject audio-video signals into an existing coaxial cable network. Signals from various sources (surveillance cameras, media players, computers) are fed through the HDMI or AV input and then output via RF modulation to multiple receivers over coaxial or hybrid fiber/coax infrastructures.
Menu Navigation
Navigate the device menus using the following methods:
- Use the directional keys [[left-arrow]/[right-arrow]] to select preset values.
- To enter numeric values: Move the cursor to the desired line, press OK. Use the directional keys [[up-arrow]/[down-arrow]] to move the cursor to the digit to change, then press OK to modify.
- To enter alphanumeric values: Press OK. An overview of the character set will appear. Use the directional keys [[left-arrow]/[right-arrow]] to move the cursor. Press OK to accept a character. To correct entries, place the cursor on "<- " or "->" and press OK to move to the next/previous letter.
To delete a character, move the cursor to "Del". Exit the input window by pressing RETURN.
Changes are applied and saved only after confirmation. To save work, leave the main menu by pressing RETURN. A dialogue box will appear; select "Yes" to save changes or "No" to discard them.
Application Drawing Description
The application drawing illustrates a typical setup for the Thor Broadcast H-PCKT-MOD HDMI Video to Coax 1080P Dolby HD Modulator. The diagram shows various input sources such as Amazon Fire TV Stick, LG Blu-ray player, and a surveillance camera, all connected via HDMI to multiple H-PCKT-MOD units. These units output RF signals. An RF cable connects to an RF splitter, which then distributes the signal to multiple output devices (TVs displaying content like "ALPHA", "HBO", etc.). The diagram also shows an RF connector and the device's RF In/Out ports.
J.83B Menu Settings
J.83B Menu
| Setting | Description |
|---|---|
| Frequency (MHz) | Output Frequency |
| Short Name | Press OK to edit |
| Major Ch | Press OK to edit |
| Minor Ch | Press OK to edit |
| Modulation | Select 64 or 256QAM |
| RF Attenuation | Attenuation of the output (0-30dB attenuation > output level 100-70 dBuV) |
| More | If necessary, you can set further values here |
| Version | Check the device SW version |
J.83B – Advanced Settings
| Setting | Description |
|---|---|
| Service ID | Alphanumeric |
| TS ID | [0000-65535] |
| Min BR | Minimum bitrate, 2000 kbps |
| Max BR | Maximum bitrate 24000 kbps |
| Audio Encoder | MPEG1 / AC3 / AAC |
| PMT PID | [32-8190] |
| Video PID | [32-8190] |
| Audio PID | [32-8190] |
| PCR PID | [32-8190] |
| Network | Check and set the IP |
| Factory Default | Reset to factory settings |
ATSC Menu Settings
ATSC Menu
| Setting | Description |
|---|---|
| Frequency (MHz) | Output Frequency |
| Short Name | Press OK to edit |
| Major Ch | Press OK to edit |
| Minor Ch | Press OK to edit |
| RF Attenuation | Attenuation of the output (0-30dB attenuation > output level 100-70 dBuV) |
| More | If necessary, you can set further values here |
| Version | Check the device SW version |
ATSC – Advanced Settings
| Setting | Description |
|---|---|
| Service ID | Alphanumeric |
| TS ID | [0000-65535] |
| Min BR | Minimum bitrate, 2000 kbps |
| Max BR | Maximum bitrate 24000 kbps |
| Audio Encoder | MPEG1 / AC3 / AAC |
| PMT PID | [32-8190] |
| Video PID | [32-8190] |
| Audio PID | [32-8190] |
| PCR PID | [32-8190] |
| Network | Check and set the IP |
| Factory Default | Reset to factory settings |
DVB-T Menu Settings
DVB-T Menu
| Setting | Description |
|---|---|
| Frequency (MHz) | Output Frequency |
| Bandwidth | Bandwidth 6M / 7M / 8M, typical value: 8MHz at 474-786 MHz or 7 MHz at 177.5-226.5 MHz |
| Service Name | Press ENTER to change the service name. Under this name, the output signal appears in a channel list; enter up to 15 alphanumeric characters. |
| LCN | With LCN (Logical Channel Numbering), compatible TVs sort the modulated signal during the search according to the number in the channel list entered here. |
| RF Attenuation | Attenuation of the output (0-30dB attenuation > output level 100-70 dBuV) |
| More | If necessary, you can set further values here |
| Version | Check the device SW version |
DVB-T – Advanced Settings
| Setting | Description |
|---|---|
| Service Provider | alphanumeric |
| Network ID | [0000-65535] |
| ONID | [0000-65535] |
| TS ID | [0000-65535] |
| Service ID | [0000-65535] |
| Min BR | Minimum bitrate, 2000 kbps |
| Max BR | Maximum bitrate 24000 kbps |
| Modulation | QPSK / QAM16 / QAM64 |
| FFT | Fast Fourier Transform Mode 2K / 8K |
| Guard Interval | 1/4 / 1/8 / 1/16 / 1/32 |
| Code Rate | 1/2 / 2/3 / 3/4 / 5/6 / 7/8 |
| PMT PID | [32-8190] |
| Video PID | [32-8190] |
| Audio PID | [32-8190] |
| PCR PID | [32-8190] |
| Network | Check and set the IP |
| Factory Default | Reset to factory settings |
ISDB-T Menu Settings
ISDB-T Menu
| Setting | Description |
|---|---|
| Frequency (MHz) | Output Frequency |
| Service Name | Press ENTER to change the service name. Under this name, the output signal appears in a channel list; enter up to 15 alphanumeric characters. |
| Key ID | Compatible TVs sort the modulated signal during the search according to the number in the channel list entered here. |
| RF Attenuation | Attenuation of the output (0-30dB attenuation > output level 100-70 dBuV) |
| More | If necessary, you can set further values here |
| Version | Check the device SW version |
ISDB-T – Advanced Settings
| Setting | Description |
|---|---|
| Service Provider | alphanumeric |
| Network ID | [0000-65535] |
| ONID | [0000-65535] |
| TS ID | [0000-65535] |
| Service ID | [0000-65535] |
| Min BR | Minimum bitrate, 2000 kbps |
| Max BR | Maximum bitrate 24000 kbps |
| Modulation | QPSK / QAM16 / QAM64 |
| FFT | Fast Fourier Transform Mode 2K / 8K |
| Guard Interval | 1/4 / 1/8 / 1/16 / 1/32 |
| Code Rate | 1/2 / 2/3 / 3/4 / 5/6 / 7/8 |
| PMT PID | [32-8190] |
| Video PID | [32-8190] |
| Audio PID | [32-8190] |
| PCR PID | [32-8190] |
| Network | Check and set the IP |
| Factory Default | Reset to factory settings |
Packing List
| Item | Quantity |
|---|---|
| Thor Broadcast H-PCKT-MOD | 1 PC |
| User's Manual | 1 PC |
| HDMI Cables | 1 PCS |
| Power Cord | 1 PC |
Technical Support
For further technical support, please contact:
Phone: 1-800-521-Thor(8467)
Email: support@thorfiber.com