Daytech Wireless Doorbell User Manual

Product Overview

This wireless doorbell system consists of a receiver (indoor unit) and a transmitter (outdoor unit). It offers a simple and flexible installation without wiring. This product is suitable for various locations including family residences, hotels, hospitals, companies, and factories.

The receiver is available in two power supply modes: DC doorbell (battery-powered receiver) and AC doorbell (receiver with a plug for AC power supply). The transmitter is battery-powered.

Specifications

Product Features

• Learning Code ?
• 38/55 Ringtones ?
• Memory Function ?
• Transmitter Waterproof Grade IP55 ?️
• Level 5 Volume Adjustable, 0-110 dB ?
• 150-300 Meters Barrier-free Distance ?

Installation

For AC Receiver: Plug the receiver into a mains socket and switch the socket on.

For DC Receiver: Insert 3 AAA batteries into the battery box ? of the receiver. Place the receiver where you want it.

For Transmitter: Pull out the white insulating strip from the transmitter. Place the transmitter where you intend to fix it. With doors closed, confirm the receiver sounds when the transmitter button is pressed. If it doesn't sound, reposition the transmitter or receiver. Fix the transmitter in place using the included double-sided adhesive tape ? or screws.

Product Diagram Description

The diagram illustrates the components:

• AC Receiver: Features a plug ?, speaker ?, and volume controls (backward ◀️, forward ▶️).
• DC Receiver: Features a speaker ?, volume controls (backward ◀️, forward ▶️), and a battery box ? with a button & LED ?.
• Transmitter: Features a button & LED ?, an "Open From Here" ➡️ indicator, and shows the 3M Double-sided Adhesive ? for mounting.

Volume Adjustments

The doorbell volume can be adjusted to one of five levels. Short press the Volume Button ? on the receiver to increase the volume by one level. The doorbell will sound to indicate the selected level. If the maximum volume is set, the next level will cycle to the minimum volume (Silent Mode).

Change the Ringtone/Pairing

The default ringtone is "DingDong". Users can easily change it:

1. Short press the Backward ◀️ or Forward ▶️ Button on the receiver to select your desired music. The receiver will play the selected music.
2. Long press the Volume Button ? on the receiver for about 5 seconds until it makes one "Ding" sound and the LED light flashes.
3. Press the transmitter button quickly within 8 seconds. The receiver will make two "Ding" sounds and the LED light will flash, indicating the setting is complete. This learning mode lasts only 8 seconds before automatically exiting.

Remark: This method is suitable for changing ringtones, adding new transmitters and receivers, and re-matching.

Clear Settings

Long press the Forward ▶️ Button on the receiver for about 5 seconds until it makes one "Ding" sound and the LED light flashes. All settings (ringtones and paired transmitters/receivers) will be cleared.

When the transmitter button is pressed again, only the first transmitter will be automatically paired with the receiver. Other transmitters will need to be re-matched.

For Night Light Doorbell Only

• For N20 Series: Long press the middle Backward ◀️ Button of the doorbell receiver for 5 seconds to turn the night light ? ON/OFF.
• For N108 Series: This model features a PIR/body motion sensor night light ?. It has automatic ON/OFF night light functionality with two dimming modes: human body detection and light control detection. It offers a 7-10m detection distance and a 45-second delay time to turn off the lights.

Troubleshooting ❓

If the doorbell does not work, consider the following possible causes:

• The battery in the transmitter or DC receiver may be run down. Please replace the battery.
• The battery may be inserted incorrectly (polarity reversed). Insert the battery correctly; be aware that reverse polarity may damage the unit.
• Ensure that the AC receiver is switched on at the mains.
• Check that neither the transmitter nor the receiver are placed near potential sources of electrical interference, such as power adaptors or other wireless devices.
• The range may be reduced by obstacles like walls, although this should have been checked during setup.
• Ensure no object, particularly a metal one, is placed between the transmitter and the receiver. You may need to reposition the doorbell.

Cautions ⚠️

• The doorbell receiver is for indoor use only. Do not use it outdoors or allow it to become wet.
• There are no user-serviceable parts. Do not attempt to repair the transmitter or receiver yourself.
• Avoid siting the transmitter in direct sunlight or rain.
• Use only high-quality batteries.

Warranty ?️

This product is covered by a one-year warranty from the date of original retail purchase, covering defects in materials and workmanship. The warranty does not cover damage, defects, or failures caused by accidents, external damage, alteration, modification, abuse, misuse, or attempted self-repair. Please keep your purchase receipt.

Packing List ?

• Transmitter
• Receiver
• 1x 23A 12V Alkaline Zinc-manganese Battery
• User Manual
• Double-sided Adhesive Tape
• Mini Screw Driver
• Box

Regulatory Information

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

ISED RSS Warning:

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISED RF exposure statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement.

Note on Interference:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.