Vader 3/3 Pro Game Controller

Innovative Force-switchable Trigger

Toggle the back gear switch to switch the trigger gear.

1 Linear gear: precise control, 9mm long key travel, Hall stepless magnetic induction, precision throttle.

2 Microswitch gear: fast trigger, 0.3mm ultra-short key travel, mouse-level micro motion response, easy continuous shooting.

Flydigi Space Station For More Customize Setting

Visit the official website www.flydigi.com to download "Flydigi Space Station". You can customize buttons, macros, body feeling, trigger, and other functions.

• The trigger vibrates: Switch trigger vibration, set vibration mode.
• Joystick adjustment: Set the center dead band and sensitivity curve.
• Somatosensory mapping: The motion can be mapped to a joystick/mouse, making shooting games more accurate.
• Light conditioning: Set up a variety of light effects, adjust color and brightness.

*Trigger vibration function is only supported on Pro models.

Connect With Computer

Wireless dongle connection

1. Plug the dongle into the computer's USB port.
2. Dial the back gear to the USB symbol [], press the [Home] button, the controller will be connected automatically, and the first indicator light will be solid white.
3. If the indicator is blue, press and hold the O+X keys at the same time until the indicator turns white.
4. The next time you use it, press the [Home] button once, and the controller will be connected automatically.

Wired connection

Connect the computer and the controller through the USB cable, and the indicator light will be solid white to indicate that the connection is successful.

BT connection

Turn the back mode gear to the Bluetooth symbol [] and connect the Xbox Wireless Controller to your computer's BT Setting.

Connect to Switch

1. Click the controller icon on the Switch homepage to enter [Change grip/order].
2. Shift the back gear to the NS symbol [].
3. Press the [Home] button, the controller will be connected automatically, and the first indicator light will be solid blue.
4. The next time you use it, press the [Home] button once and the controller will automatically connect.

In Switch mode, the key and key-value mapping relationship is as follows:

Connect an Android/iOS device

1. Shift the back mode gear to the Bluetooth symbol [].
2. Press the [Home] button once to wake up the controller.
3. Turn on the device's Bluetooth, connect to the Xbox Wireless Controller, and the controller indicator will show connection status.
4. The next time you use it, press the [Home] button once and the controller will automatically connect.

Basic operations

• Power on: Press the [Home] button once.
• Power off: Switch back gear. After 5 minutes of no operation, the controller will automatically turn off.
• Low battery: The second LED flashes red.
• Charging: The second indicator is solid red.
• Fully charged: The second indicator is solid green.

Specification

XInput mode: suitable for the vast majority of games that natively support controllers.

DInput mode: For emulator games that natively support controllers.

Wireless RF: Bluetooth 5.0

Service distance: less than 10 meters

Battery information: rechargeable lithium-ion battery, battery capacity 800mAh, charging time 2 hours, charging voltage 5V, charging current 800mA.

Operating current: less than 45mA when in use, less than 45µA in standby.

Temperature range: 5 °C ~ 45 °C use and storage.

Appearance

Top View:

• Detachable D-pad
• FN button
• SELECT and START buttons
• A, B, X, Y buttons
• Z and C buttons
• Replaceable sticks
• USB interface

Back View:

• Trigger gear switch
• 4 expansion back buttons
• USB port
• Controller mode gear

Q & A

Q: The controller cannot be connected?

A: Please make sure that the back gear of the controller is correct. Press and hold the [Home] button for three seconds at the same time; the indicator flashes quickly, and the controller enters the pairing state.

• Pair the receiver: Unplug the receiver and plug it back into the USB port.
• Pair Bluetooth: Unpair the device on the Bluetooth settings page, turn Bluetooth on and off, and reconnect.

Q: How to upgrade the controller firmware?

A: Install the Feizhi space station on the computer, or install the Feizhi game hall on the mobile phone, and upgrade the firmware according to the software boot.

Q: Is there an abnormality in the joystick/trigger/body feeling?

A: Install the Feizhi space station on the computer, enter the test page, and press the guide calibration controller.

The name and content of harmful substances in the product

This form has been prepared in accordance with the provisions of SJ/T 11364.

◯ Indicates that the content of the hazardous substance in all homogeneous materials of this part is within the limit specified in GB/T 26572-2011.

X Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the provisions of GB/T 26572-2011.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.