FX Helmet Bluetooth Intercom
Quick Start Guide
Product Details
This guide provides instructions for the FX Helmet Bluetooth Intercom.
Basic Operations
- Power On[Hold Multi-function Button for 2 seconds]
- Power Off[Hold Multi-function Button for 3 seconds]
- Volume Up / Next Song[Press and hold Volume+/Next Song button]
- Volume Down / Last Song[Press and hold Volume-/Last Song button]
- Start/End Intercom[Tap On/Off/(Intercom) Button once]
- Clear Pairing History[Under Power On status, hold Multi-function Button for 8 seconds]
- Check Battery Level[Listen to voice reminder (under power off status) or check on phone]
Phone Call Operations
- Answer a Call[Tap Multi-function Button once]
- Reject a Call[Hold Multi-function Button for 2 seconds]
- End a Call[Tap Multi-function Button once]
- Activate Voice Command[Hold Multi-function Button for 2 seconds]
- Convert Phone Answering Receiver Mode[Hold Multi-function Button for 2 seconds]
FM Operations
- Turn On/Off FM[Tap Multi-function Button once]
- Next Channel[Tap Multi-function Button once]
- Last Channel[Tap Multi-function Button once]
- Play/Pause FM[Tap Multi-function Button once]
Music Control
- Play/Pause Music[Tap Multi-function Button once]
- Music Sharing - Turn On[Hold button to turn on share]
- Music Sharing - Turn Off[Hold button to turn off share]
Installation Steps
- Mounting clamp
Illustration of the mounting clamp component.
- Fit the clamp to proper position on the left side of the helmet.
Illustration showing the mounting clamp being attached to the side of a helmet.
- Aligning the clamp slot and install FX host onto the clamp.
Illustration demonstrating how to align the clamp slot and attach the FX host unit.
- Stick the earphone velcro pads at the ear position inside the helmet.
Illustration depicting the placement of earphone velcro pads inside a helmet.
- Stick the headphones on Velcro pads.
Illustration showing the headphones being affixed to the velcro pads.
- Plug the earphone into the FX earphone jacket.
Illustration of the earphone cable being plugged into the FX unit's earphone jacket.
Pairing
Pair with Phone/MP3/GPS
[Under power off status, hold Multi-function Button for 5 seconds]
Diagram illustrates the process of pairing the FX unit with a phone, MP3 player, or GPS device.
Pair with Other Brand's BT Headset
Follow the instructions to enter pairing mode on the other headset.
Diagram shows pairing with another brand's headset.
Note: This operation should be after the two devices are paired, and both should not be paired with any other FX.
Group Talking Pairing (Up to 4 units)
Pair A and B, then turn off B.
Pair B and C, then turn off C.
Pair C and D, then turn off D.
Pair D and E, then turn off E.
Pair E and F.
After pairing, click the On/Off button once on A, B, C, D to enter group intercom.
Tips: If any unit disconnects, tap the On/Off button to connect with the next unit, double-tap to connect with the previous one.
Diagrams illustrate sequential pairing for group intercom.
Languages Switching
[Tap Multi-function Button once] to switch between Chinese (Cn) and English (En).
Running Water Lights ON/OFF
[Tap Running Water Lights ON/OFF Button]
FCC Compliance
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warranty Card
Model Number: FX
Year Warranty: 1 Year
Please keep your purchase receipt together with your warranty card & "invalid if removed" label.
Name:
Address:
Failure Description:
Space for user to fill in details. A small graphic might indicate where to affix a receipt.
After sale service: service@fdcdz.com
Manufacturer: ShenZhen FDC Electronics Co., Ltd
Address: Freed Cann 4th Floor, Huachuangda Industrial Park, Gushu Hangcheng Road, Baoan District, Shenzhen China
Please affix a copy of invoice on the back of warranty card as a proof of purchase date. If you find any problems during use of our product, please contact our after sale service. Please make sure that you describe the problems clearly on warranty card so that we can handle them timely.