Technilight TSBW3A Smart Electronic Controller Switch Instructions

WARNING

May cause serious or fatal injuries. Turn off power at the circuit breaker before installing the device.

TOP

ON/OFF

INDOOR USE ONLY

Cu (AL)

Diagram: A depiction of the Technilight Smart switch with ON/OFF and dimming buttons.

FEATURES

• BT programming compatible via smartphone IOS or Android with the Technilight Smart application.
• Manual control of on/off and dimming. Dimming compatible with Technilight Smart components designed for this purpose (relays, occupancy sensors, etc.).
• Compatible with Technilight Smart devices and components.
• Can be used for a "retrofit" installation type (ON/OFF only). (Dimming will be via Technilight Smart components and programming).
• Recessed installation with a provided mounting box.

SPECIFICATIONS

WIRING

1. Remove the wall plate and mounting screws from the switch.
2. Carefully remove the switch from the junction box. DO NOT disconnect the wires.
3. There are three wiring connections on the switch, marked LIVE, NEUTRAL, GROUND.
4. Disconnect the wires from the existing switch.
5. Connect the green wire to the GROUND terminal.
6. Connect the white wire to the terminal marked NEUTRAL.
7. Connect the black wire to the terminal marked LIVE.
8. Check connections to ensure they are tight and no bare conductor is exposed.
9. Carefully insert the switch into the outlet box.
10. Ensure the switch is securely fastened to the box using the provided screws.
11. Attach the wall plate.
12. Restore power at the circuit breaker and test the system.

Diagram: Shows wiring connections: GROUND (GREEN), NEUTRAL (WHITE), LIVE (BLACK) with corresponding terminals on the switch.

Diagram: Illustrates the switch with ON/OFF button and dimming controls.

Tips: This Bluetooth device is only compatible with the Technilight Smart lighting control system.

Wire stripping length: 16 mm (5/8 in)

The device must be installed in a standard outlet box.

INSTRUCTIONS

1. ON/OFF
2. Dim +
3. Dim -

• Follow the instructions to connect the Bluetooth wall switch to the lights.
• Press buttons 1 and 2 simultaneously for 3 seconds to enter pairing mode and obtain the reset function. This switch can be scanned within the next 30 seconds.
• On the "Switch" page of the Technilight Smart application, click to add the switch.
• Select the light/group of lights to be controlled by this switch.
• For more details on operation, refer to the Technilight Smart instructions.

How to install the Technilight Smart application?

Download our application:

Diagram: QR code for Technilight Smart Google Play Android.

Diagram: QR code for Technilight Smart Apple Store iOS.

Technilight Smart Google play Android

Technilight Smart Apple store iOS

WARRANTY INFORMATION

Technilight warrants that this product is free from defects in materials and workmanship for a period of 5 years. Technilight assumes no obligation or liability for indirect damages arising from the use or performance of this product, or in connection therewith, nor for other indirect damages related to loss of property, revenue, or profits, or for removal, installation, or reinstallation costs.