詹工电气-詹工电气
shop797k641127960.1688.com/
User Manual for TJmart models including: 2BBU5-ZG-TXWM-9A, 2BBU5ZGTXWM9A, ZG-TXWM-9A Extension Socket, ZG-TXWM-9A, Extension Socket, Socket
Guangdong Zhangong Electric Technology Co., Ltd. ZG-TXWM-9A Relocatable power taps 2BBU5-ZG-TXWM-9A 2BBU5ZGTXWM9A zg txwm 9a
File Info : application/pdf, 5 Pages, 243.60KB
DocumentDocumentExtension Socket ZG-TXWM-9A 1Product Introduction *Button instruction Overload control switch key: press to power on, switch red light on indicates that the socket has been powered on. *USB output description USB supports a maximum single-port 2.1A output and uses a shared 20W at the same time. 2The name and content of harmful products Hazardous substance Name of (pb) (Hg) (Cd) (PBB) (Cr (VI)) (PBDE) parts PCBA X O O O O O Shell O O O O O O Structural X O O O O O metal This form is prepared in accordance with the provisions of SJ/T11364 O: Indicates that the content of the harmful substance in all homogeneous materials of the part is below the limit requirements specified in GB/T26572 X: Indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirements specified in GB/T26572 Note: This product is marked with an "X" because there are no alternative technologies or components available at this stage 10 The numbers in this label indicate that the environmental protection life of the product under normal use is 10 years 3Warranty description The warranty period is one year from the date of purchase. During the warranty period, if the product fails under normal use (excluding man-made damage), it can be repaired or replaced free of charge with the purchase invoice. For the products sold without our permission or unauthorized service center, incorrect use of non-this product, such as unauthorized dismantling of the components of the product, beyond the warranty period, due to irresistible force damage such as natural factors, our company will not assume the free warranty responsibility for the product. Warning 1.When multiple plugs are inserted at the same time, the total power of the load shall not exceed the maximum allowable power 2.Please do not coil the extension cord socket. If the coil is used, the actual current value that can be carried will be lower than its amount Constant value 4Basic parameter Product model: ZG-TXWM-9A Nominal voltage: 125~50/60Hz Maximum current: 15A Rated power: 1850W Max. Operating temperature:-5C-35 USB Output voltage:5V=-2.1A Max. Executive standard:GB/T1002-2021;GB/T 2099.1-2008; GB/T 2099.7-2015; GB 17625.1-2022(A type); GB 4943.1-2022;GB/T 9254.1-2021 Suitable for non-tropical climates only. 5Contact address Manufacturer: Guangdong Zhangong Electric Technology Co., Ltd. Add: 701, Building 29, Zhifu Industrial Park, Xingtan Town, Shunde District, Foshan City, Guangdong Province Telephone hotline: 0757-26363652 Website guide: http://www.zhangongsocket.com/ https://shop797k641127960.1688.com/ This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.