Vision Net - Vision Net
Home | Vari-Lite
ZerOS USB Creator | Zero 88ZerOS SOFTWARE & LIBRARY | Vari-LiteZerOS USB Creator | Zero 88
Instructions for zero88 models including: ZerOS 7.12, Software, ZerOS 7.12 Software
ZerOS | Zero 88
File Info : application/pdf, 3 Pages, 163.50KB
DocumentDocumentLighting Controls Software Release Notes ZerOS Software Release (Public Release) Released Version: 7.12 Release Date: 30 June 2022 Previous Versions: 7.11 Release Date: 6 April 2022 ZerOS 7.12 Software Release Introduction Release 7.12 of ZerOS is a new software release recommended for all consoles and servers listed below, running the ZerOS Operating System. These release notes describe the new features, enhancements and bug fixes that have been implemented between versions 7.11 and 7.12. Products Affected FLX FLX S24 & S48 ZerOS Server ORB Series Solution Series SCD Server & SCD Server Pro Leap Frog 48 & 96 Phantom ZerOS (offline software) Compatibility No compatibility issues known from 7.11. Update Instructions Please carefully follow the update instructions available at the end of this document. The software installation process completely removes all data on the console, including any current show files. If the curren t show file is still required, please ensure that backups are taken before proceeding with the update. After completing the update, you may re-load your show if required. When performing a software update it is important to ensure that the power supply to your desk is stable and reliable. Power loss during a software update can render your desk unusable. Usk House, Lakeside, Llantarnam Park, Cwmbran, NP44 3HD. UK Tel: +44 (0)1633 838088 Fax: +44 (0)1633 867880 Email: enquiries@zero88.com Web: www.zero88.com Lighting Controls Software Release Notes New Features ZOS-10920 ZOS-10921 KiNET support added KiNet, an ethernet-based lighting control protocol from Color Kinetics, is designed to enable larger lighting projects and provide control over luminaires which is beyond the limitations of other protocols. ZerOS users can now utilise KiNet when controlling a range of Color Kinetics architectural luminaires. KiNet can be enabled in SETUP > Devices > KiNet. KiNet devices will then automatically appear, allowing a Desk Universe to be assigned to it. Fixtures can be patched onto the assigned Desk Universe in the usual way. Vision.Net support added Vision.Net, an ethernet-based command protocol from Strand, is designed to fully integrate lighting systems that scale from a single room to large multi-building campuses. ZerOS users can now utilise the full range of Vision.Net button panels, touchscreens, sensors and I/O modules to trigger their ZerOS console or server. Vision.Net can be enabled in SETUP > Triggers > Vision.Net. An "Area ID" must be defined (defaults to "1"). "Virtual Rooms" can be assigned to Macros, the Grandmaster and Playback faders. Each Playback can also be assigned a "Virtual Room" within Playback Settings > Advanced. Each "Scene" then triggers the equivalently numbered cue within that Playback. ZOS-10922 Philips Hue support added to FLX, FLX S and ZerOS Server FLX, FLX S and ZerOS Server users can now utilise the full range of Philips Hue Smart Light Bulbs and Philips Hue Smart Plugs, by connecting their console or server to a Philips Hue Bridge (via Ethernet). Smart Light Bulbs are controlled within ZerOS in the same way as a LED fixture whilst Smart Plugs are controlled like a Relay device. These can be programmed into standard cues, allowing simultaneous control with the rest of the entertainment lighting system. Philips Hue can be enabled in SETUP > Devices > Philips Hue. Bridges on the network should automatically appear after a few seconds, or can be added manually. After adding a Bridge, select "Pair" in ZerOS and then press the physical pairing button on top of the Philips Hue Bridge. Once paired, fixtures are automatically added to the Fixture Schedule (similarly to RigSync) ready to control. The Output Window will display the custom device names. Enhancements and Bug Fixes ZOS-8928 ZOS-10939 ZOS-10943 ZOS-10946 ZOS-10948 ZOS-10951 ZOS-10952 ZOS-10954 ZOS-10958 ZOS-10961 ZOS-10962 ZOS-10969 ZOS-10970 ZOS-10971 ZOS-10972 ZOS-10973 ZOS-10974 Removed "Fixture UDKs" functionality (which can be replicated using "Group UDKs") Fixed issue related to RigSync which could cause stability issues Fixed issue related to "Add Fixture" which could cause stability issues This also covers the following issues: ZOS-10955, ZOS-10956, ZOS-10959, ZOS-10963, ZOS-10976 & ZOS-10978 Fixed issue which stopped custom Colour Temperatures from being recorded on FLX S Fixed issue related to Changing Fixture Profiles which could cause stability issues Updated font across ZerOS and improved font rendering on FLX, FLX S and ZerOS Server Updated Linux Kernel and Operating System for FLX, FLX S and ZerOS Server Fixed issue related to Colour Filter palettes which could cause stability issues This also covers the following issues: ZOS-10979 ZerOS Library 3.2 included Fixed issue related to Colour Filter palettes which could cause loading and/or playback issues Support added for fixtures with only an Intensity and Colour Temperature parameter Fixed issue where Fixture Levels of an individual fixture could not be recorded onto a UDK Improvements made to Software Upgrade Mechanism Fixed issue related to internal showfile saving which could cause stability issues Front panel LCDs in Phantom ZerOS (ORB & Solution) now use the same font as the physical LCDs ZerOS now displays a numberpad (rather than keyboard) on numeric fields, such as IP address Fixed issue where "Knockout" could cause stability issues Known issues No known issues Usk House, Lakeside, Llantarnam Park, Cwmbran, NP44 3HD. UK Tel: +44 (0)1633 838088 Fax: +44 (0)1633 867880 Email: enquiries@zero88.com Web: www.zero88.com Lighting Controls Software Release Notes Software Update Instructions Introduction Please familiarise yourself with these update instructions before proceeding. Instructions must be followed accurately and in order. Deviations or omissions could render the desk unusable and require it to be returned to the factory for recovery. If any difficulties are encountered at any point, or you are in doubt on any of the instructions below, then do not proceed any further with the update and contact Zero 88 for assistance. The software installation process completely removes all data on the console, including any current show files. If the current show file is still required, please ensure that backups are taken before proceeding with the update. After completing the update, you may re-load your show if required. When performing a software update it is important to ensure that the power supply to your desk is stable and reliable. Power loss during a software update can render your desk unusable. Consoles running ZerOS 7.8.3 or later. To perform the update: - Download the software from the Zero 88 website ( zero88.com/zeros ) - If the file is zipped (.zip), unzip the download - Save the .exe file onto a USB stick (don't put it inside any folders) - Plug the USB stick into your console - Press SETUP to enter the console's setup screen and choose "Load" on the monitor - Select the file from the list displayed on screen and follow the onscreen instructions - Once the update is complete, remove the USB Memory Stick and reboot the desk Once all the software is up to date, you can get on with enjoying the new features in the desk software. Zero 88 recommend printing these Release Notes and having them with you when operating the desk, as some functionality may have changed which is explained in these notes. Consoles running ZerOS 7.8.2.39 or older. To update a console running ZerOS 7.8.2.39 or older, please visit zero88.com/manuals/zeros/software-updates/zeros-usb-creator for instructions. Usk House, Lakeside, Llantarnam Park, Cwmbran, NP44 3HD. UK Tel: +44 (0)1633 838088 Fax: +44 (0)1633 867880 Email: enquiries@zero88.com Web: www.zero88.com