XPR B100P-BT-EH-SA User's Manual

1. Specifications

Important note: The Bluetooth® reader comes with RU1 remote relay unit. Ensure firmware is updated with the latest available version.

2. Mounting

Follow these steps for mounting the device:

Important considerations:

• Do not install the device and cabling near strong electro-magnetic fields (e.g., radio-transmitting antennas).
• Avoid placing the device near or above heating equipment.
• For cleaning, use a smooth cloth or towel; do not spray or splash water or cleaning liquids.
• Supervise children to prevent them from touching the device.
• Using detergents, benzene, or thinner for cleaning the sensor can damage the surface and prevent fingerprint entry.
• The product operates between 0°C - +50°C. XPRT™ is not responsible for functionality if these guidelines are not followed.

3. Reset Reader to Default

To reset the reader to its default settings:

1. Turn the device OFF.
2. Set dipswitch 1 to the ON position.
3. Turn the power ON.
4. Wait approximately 15 seconds until continuous beeps are heard.
5. Set dipswitch 1 back to the OFF position.
6. Wait for a long beep, indicating the reset is complete.

This procedure will delete passwords, unpair users, and reset the reader to factory defaults. Unpairing prevents unauthorized access and maintains high security.

4. Wiring and Pairing

The reader can be wired and paired with four types of remote relay units: RU2, RU1, DINRTT, and RTT.

Diagram illustrating the different remote relay units: RU2 (2 Relay Remote Unit), DINRTT (2 Relay Remote Unit and request-to-exit Button), RU1 (1 Relay Remote Unit), and RTT (1 Relay Remote Unit and request-to-exit Button). It also shows connections for Power Supply (+12V, GND), Wiegand (DO, D1), RS-485 (A, B), and Tamper.

4.1 Wiring and pairing B100P-BT-EH-SA + RU1

Pairing the reader with a remote relay unit (e.g., RU1) is essential for high security and is done from the remote relay unit itself. Once paired, devices cannot be switched, ensuring the reader works exclusively with its paired unit.

Wiring diagram showing connections between the B100P-BT-EH-SA reader and RU1 remote relay unit. It details power (+12V, GND), Wiegand (DO, D1), RS-485 (A, B), and Tamper connections. A note indicates that keeping a button pressed for at least 5 seconds will pair the units.

Other pairing devices:

4.2 Wiring B100P-BT-EH-SA to Wiegand Controller

The reader can be connected to a Wiegand controller. By default, it is set to Wiegand 26-bit, but this can be configured to 24, 26, 32, 34, 56, or 58 bits using the software.

Wiring diagram showing connections between the B100P-BT-EH-SA reader and a Wiegand controller. It includes power (+12V DC, GND), Wiegand (DO, D1), and RS-485 (A, B) connections. The diagram also shows the 'Host' connection.

5. Setting Up Readers with XPR Smart Admin Windows Software

Follow these steps to configure readers using the XPR Smart Admin software:

1. Add a site first within the software.
2. Click on "ADD" reader.
3. Select the reader type as "B100P-BT-EH-SA".
4. Scan for nearby readers by clicking "Scan". Found readers will be listed. Select the desired reader.
5. Add a pairing key and a password between the PC and the Bluetooth reader.
6. Once pairing is successful, the reader section buttons will become enabled.

XPR offers two Windows software applications: XPR Smart Access and XPR Smart Admin, available for download from the website.

Users Software (XPR Smart Access): Application for users to manage doors remotely (up to 5m distance).

Administrator Software (XPR Smart Admin): Software for administrators to program readers, update firmware, manage users and access rights, download events, and edit reports (up to 5m distance).

Screenshot illustrating the XPR Smart Admin interface for adding a reader, showing fields for Name, Type, Serial ID, Pairing Key, and Administrator Password. It also shows the 'Scan' and 'Select' options.

Screenshot showing the 'Configure Reader' options in XPR Smart Admin, including Upload users, Download events, Read properties, and Firmware Update.

6. Adding Users

To add users to the system:

1. Navigate to the "Users" section and select the user. Edit their name and enable the user.
2. Enter a PIN Code and Card ID. The Card ID can be read directly from the reader or a USB desktop reader.
3. Assign the appropriate Access Level and Validity Period for the user.
4. Go to the "Biometry" tab and enroll fingerprints by swiping each finger at least 6 times.
5. After enrolling, go to the reader and select "Upload users to reader".

Screenshot showing the user details interface in XPR Smart Admin, with fields for PIN Code, Card ID, Validity Period, and options for Biometry enrollment (Enroll/Delete for Fingerprint Type, Relay, Bluetooth).

Smartphone Apps

Two smartphone applications are available:

• XPR Smart Access (Users App): Allows users to manage doors remotely (up to 5m distance).
• XPR Smart Admin (Administrator App): Enables installation administrators to program readers, manage users, and download events (up to 5m distance).

Both apps are available on the App Store and Google Play.

Compliance Information

This product complies with EMC directive 2014/30/EU, Radio Equipment Directive 2014/53/EU, RoHS2 directive EN50581:2012, and RoHS3 Directive 2015/863/EU.