GETPRO Ceramic Sink Installation Guide

Model: GP-BBS18-14S

Contact:

? service@getprohome.com

? 626-679-3588

? www.getprohome.com

? 162 Atlantic St, Pomona, CA 91768

Product Overview

This document provides installation instructions for the GETPRO Ceramic Sink, Model GP-BBS18-14S.

Features:

Sleek, seamless design
Glazed ceramic material
Integrated overflow for added safety
Standard 1 3/4" drain hole

Installation Type:

Undermount

Available Colors:

White

Specifications and Dimensions

The following diagrams illustrate the dimensions of the ceramic sink:

Top View

Overall width: 16 3/10 inches. Overall depth: 14 inches. The inner bowl features a drain opening of 1 3/4 inches diameter and an overflow opening of 9/10 inches diameter.

Side View

Overall height: 11 9/10 inches. The sink depth from the rim to the bottom is approximately 8 2/5 inches.

Back View

Overall width: 20 1/5 inches. Overall height: 8 2/5 inches.

Bottom View

Shows the underside of the sink with the central drain hole.

Deluxe Ceramic Sink Collection

This model is part of the GETPRO Deluxe Ceramic Sink Collection. Other available models include:

GP-BBS18-13S
GP-BBS18-12S
GP-BBS15-11C
GP-BBS17-14C

Installation Instructions

Suggested Tools and Materials:

Clean Cloth ?
Cross Screwdriver ?
Silicone Sealant ?

Attention:

DO NOT use adhesives or adhesive sealants to install this sink.
This product is the sink only; mounting hardware is not included.

Installation Steps:

Verify Cabinet Clearance: Ensure the cabinet space is adequate for the sink installation. [Illustration: Measuring cabinet space.]
Prepare Surfaces: Clean the bottom of the countertop and the edge of the sink thoroughly. [Illustration: Cleaning surfaces.]
Install Clamps: Loosely install the sink clamps provided with the sink. [Illustration: Loosely attaching clamps.]
Apply Sealant: Apply a sufficient amount of silicone sealant around the surrounding area where the sink will meet the countertop. [Illustration: Applying sealant.]
Position and Secure Sink: Carefully position the sink under the countertop opening. Fix the sink in place and rotate each clamp to secure it firmly. Tighten the clamps quickly to ensure a tight seal. [Illustration: Placing sink and tightening clamps.]
Clean Excess Sealant: Wipe off any excess sealant immediately with a clean cloth. [Illustration: Wiping excess sealant.]
Complete Fixture Installation: Install the faucet and drain assembly according to their respective instructions. [Illustration: Installing faucet and drain.]
Test for Leaks: Check all connections for leaks by running water into the sink and observing. [Illustration: Testing for leaks.]

For a visual guide, a product instruction video is available. [Link to Installation Video - Scan QR Code]

Support and Services

If you are missing a part or encounter a defective product, please contact the Customer Service Team: