ASSEMBLY INSTRUCTION

Step 1

Attach two soft close hinges (G) to the middle door (part 11) using four wood screws (E). Attach two handles (L) to the middle door (part 11) using two wood screws (N). Attach two soft close hinges (F) to the middle door (part 11) using four wood screws (E). Attach one handle (M) to the middle door (part 11) using one wood screw (N). [Diagram shows parts 11 and 23, hardware E, F, M, N, and hinges G, L.]

Step 2

Attach two soft close hinges (G) to the door (part 23) using eight wood screws (E). Attach two handles (L) to the door (part 23) using four wood screws (N). [Diagram shows part 23, hardware E, G, L, N.]

Step 3

Attach two left front panels (part 5) to two columns (part 7) using eight wood screws (A). [Diagram shows parts 5 and 7, hardware A.]

Step 4

Attach two right front panels (part 6) to two columns (part 7) using twelve wood screws (A). [Diagram shows part 7, hardware A.]

Step 5

Connect two left side panels (part 8) to the assembled parts from Step 3 using six Minifix screws (B) and four wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 7, 8, hardware B, C.]

Step 6

Connect two right side panels (part 9) to the assembled parts from Step 3 using six Minifix screws (B) and four wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 7, 9, hardware B, C.]

Step 7

Connect the assembled left side panel (part 8) to the front rail (part 10) using two Minifix screws (B). Lock Minifix caps clockwise. [Diagram shows parts 8, 10, hardware B.]

Step 8

Connect the assembled right side panel (part 8) to the front rail (part 10) using two Minifix screws (B). Lock Minifix caps clockwise. [Diagram shows parts 8, 10, hardware B.]

Step 9

Attach the assembled left side panel (part 8) and right side panel (part 9) to the front rail (part 10) using eight wood screws (K) and two connecting pieces (Q). [Diagram shows parts 8, 9, 10, hardware K, Q.]

Step 10

Attach two iron feet (part 24) to the bottom panel (part 22) using six wood screws (D). Attach two iron feet (part 24) to the bottom panel (part 22) using four wood screws (K). Attach two caster wheels (P) to the bottom panel (part 22) using two connecting pieces (A1). [Diagram shows parts 22, 24, hardware A1, D, K, P.]

Step 11

Attach twelve wood screws (A) to the top panel (part 12) and the right side panel (part 13). [Diagram shows parts 12, 13, hardware A.]

Step 12

Apply three light belts (X) to the top panel (part 14) and the shelf (part 15). Tear off paper before sticking. [Diagram shows parts 14, 15, hardware X.]

Step 13

Attach four wood screws (A) to the top panel (part 14). Attach three light strip buckles (Z) to the top panel (part 14). [Diagram shows part 14, hardware A, Z.]

Step 14

Attach six light strip buckles (Z) to the shelf (part 15). [Diagram shows part 15, hardware Z.]

Step 15

Connect the left side panel (part 12) to two shelves (part 15) and the bottom panel (part 16) using six Minifix screws (B) and three wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 12, 15, 16, hardware B, C.]

Step 16

Connect the right side panel (part 13) to two shelves (part 15) and the bottom panel (part 16) using six Minifix screws (B) and three wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 13, 15, 16, hardware B, C.]

Step 17

Connect the assembled side panels (parts 12 and 13) to the top panel (part 14) using four Minifix screws (B) and two wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 12, 13, 14, hardware B, C.]

Step 18

Attach twenty-two wood screws (A) to the front panel (part 17) and the back panel (part 18). [Diagram shows parts 17, 18, hardware A.]

Step 19

Connect the assembled unit from Step 17 to the front panel (part 17) using four wood dowels (C). Connect the assembled unit from Step 17 to the back panel (part 18) using eight wood screws (D). [Diagram shows parts 17, 18, and the unit from Step 17, hardware C, D.]

Step 20

Attach two wood screws (A) to the rail (part 21). Attach two Minifix screws (B) to the rail (part 21). Lock Minifix caps clockwise. [Diagram shows parts 21, 22, hardware A, B.]

Step 21

Connect the assembled unit from Step 18 to the bottom panel (part 18) using eleven Minifix screws (B) and two wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 18, 19, 20, 21, 22, hardware B, C.]

Step 22

Connect the assembled unit from Step 21 to the front panel (part 17) using eleven Minifix screws (B) and two wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 17, 19, 20, 21, 22, hardware B, C.]

Step 23

Attach ten felt pads (V) to the bottom of the unit. [Diagram shows the unit and hardware V.]

Step 24

Insert the outlet cover (U) into the back panel (part 18). [Diagram shows part 18 and hardware U.]

Step 25

Connect the light belt (X) using one connecting piece (Y). [Diagram shows the unit and hardware X, Y.]

Step 26

Attach eight hinges (E) to the middle door (part 11) using sixteen wood screws (E). [Diagram shows part 11, hardware E.]

Step 27

Attach fourteen wood screws (A) to the top panel (part 2) and the movable top plate (part 1). Attach two spring catches (I) to the top panel (part 2) using two wood screws (J). Attach eight wood screws (K) to the top panel (part 2) and the movable top plate (part 1). [Diagram shows parts 1, 2, hardware A, I, J, K.]

Step 28

Attach sixteen wood screws (R) to the left slide rail (S) and the right slide rail (T). Attach one left slide rail (S) and one right slide rail (T) to the assembled unit. [Diagram shows parts 1, 2, hardware R, S, T.]

Step 29

Connect the assembled unit from Step 22 to the main body using six Minifix screws (B) and two wood dowels (C). Lock Minifix caps clockwise. [Diagram shows parts 17, 18, hardware B, C.]

Step 30

Attach two iron feet (part 24) using two O rings (O). [Diagram shows part 24 and hardware O.]

Step 31

Attach four connecting pieces (W) to the assembled unit. [Diagram shows parts 1, 2, 24, hardware W.]

Step 32

Connect the assembled unit from Step 31 to the main body using eight Minifix screws (B), four wood dowels (C), and twenty-four hole pastes (B1). Lock Minifix caps clockwise. [Diagram shows parts 1, 5, 6, 9, 10, hardware B, B1, C.]

Step 33

Connect the light belt (X) using one insert row (H) and two wood screws (K). [Diagram shows the unit and hardware H, K, X.]

Step 34

Attach sixteen hinges (E) to the door (part 23). [Diagram shows part 23, hardware E.]

Step 35

Attach six wood screws (I) to the top panel (part 3). Attach six wood screws (J) to the top panel (part 3). Attach twenty-four wood screws (K) to the top panel (part 3) and the movable top plate (part 4). [Diagram shows parts 3, 4, hardware I, J, K.]

Step 36

Assemble the main body, top panels (parts 1, 2), movable top plates (parts 3, 4), and front rail (part 10). [Diagram shows the assembled components.]

Step 37

Attach adjustable height feet (O) to the bottom of the unit. [Diagram shows the unit and hardware O.]

Step 38

Connect the light belt (X) to the unit. [Diagram shows the unit and light belt.]

Step 39

Attach the movable top plates (parts 3, 4) to the main assembly. [Diagram shows the unit and parts 3, 4.]

Additional Information: Induction Switch Lamp User Manual

EN User manual for induction switch lamp

Operating status: Blue LED illuminates permanently.

Switch control:

• Touch sensor surface briefly: Lamp on
• Brief touch again: Lamp off

Brightness control:

• Long press sensor surface: Light gradually goes from dark to bright.
• Long press again: Light gradually goes from bright to dark.

FR Instruction d'utilisation pour Lampe à interrupteur d'induction

État opérationnel: LED bleue illumine de façon permanente.

Commande du commutateur:

• Toucher courtement la surface du capteur: Lampe ein
• De nouveau bref: Lampe out

Réglement de luminosité:

• Presser longuement sur la surface du capteur: La lumière devient progressivement de sombre à clair.
• Appuyer à nouveau longtemps: La lumière devient progressivement de claire à sombre.

[Diagram shows LED light strip, induction switch, USB connector.]