Table of Contents
Overview
6500 Series Cylindrical Lever Lock
Designed for increased usability, the 6500 Line standard duty key-in-lever lock exceeds ANSI/BHMA Grade 2 standards. It installs easily and is available in eight functions and seven different finishes to match existing facility aesthetics.
Specifications
| For Doors | 1-3/8" (35mm) to 1-3/4" (44mm) only |
| Backset | 2-3/4" (70mm) standard; 2-3/8" (60mm) optional (20- option) |
| Cylindrical Housing | Steel zinc dichromate finish |
| Front | Wrought brass and stainless steel |
| Dimensions | 2-1/4" (57mm) x 1-1/8" (29mm) |
| Strike | 800 Curved Lip, Brass or Stainless Steel Standard; 808 ANSI Curved Lip available (28- option); 505 Full Lip strike available (14- option) |
| Hand | Universal, non-handed |
| Latch | Brass 1/2" (13mm) throw |
| Keys | Two, nickel silver |
| Cylinder | Brass, 6- pin, LA keyway standard |
| Finishes | 03, 04, 10B, 10BE, 26, 26D, BSP |
| Door Prep | ANSI/BHMA A156.115 |
| Minimum Stile | 4-1/2" (114mm) |
Certifications
Certification Compliance
| Standard | Compliance |
|---|---|
| ANSI/BHMA | Certified ANSI/BHMA A156.2 (2017) Series 4000 — Grade 2 |
| UL/cUL | UL/cUL Certified to UL10C/ULC-S104 for 3 Hour Doors |
| NFPA 80 | Conforms for life safety and property protection, Standard for Fire Doors and Other Opening Protectives |
| Positive Pressure | Meets ANSI/UL 10C, Positive Pressure Fire Test of Door Assemblies |
| ADA | All levers conform to ADA clear opening width requirements of ANSI A117.1 |
| California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) | All levers with returns comply; levers return to within 1/2" (13mm) of door face |
| Windstorm/Hurricane | All individual components of a total door opening are required to comply with each code. |
Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Windstorm Certifications: Florida Building Codes & UL Listings
SARGENT Manufacturing's products meet building codes that require hurricane and windstorm certifications, including some of the most stringent building codes as specified in the Florida Building Code, Miami Dade Code and the International Building Code. Listed below are certifications and standards met by the 6500 Series lock.
Florida Building Code: FL2998
UL Certification Directory: ZHEM.R21744 – Latching Hardware
| Standard | Description |
|---|---|
| ANSI/SDI A250.13 (2014) | "Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies" |
| ASTM E330 (2002) | "Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference" |
| ASTM E1886 (2005) | "Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" |
| ASTM E1996 (2009) | "Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" |
| (TAS) 201 (1994) | "Impact Test Procedures" |
| (TAS) 202 (1994) | "Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference" |
| (TAS) 203 (1994) | "Criteria for Testing Products Subject to Cyclic Wind Pressure Loading" |
* Published in the 7th Edition (2020), “Florida Building Code” (FBC), State Product Approval Number FL2998
UL Certification Directory: ZHLL.R21744 – Products for Use in Windstorm-rated Assemblies
Certifications to meet assembly requirements are done in conjunction with doors from ASSA ABLOY Group companies CECO DOOR and CURRIES.
| Standard | Description |
|---|---|
| ASTM E330 (2002) | "Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference" |
| ASTM E1886 (2005) | "Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials" |
| ASTM E1996 (2009) | "Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes" |
Lever & Rose Designs
Standard Lever/Rose
KL Design
- Rose: K - Wrought
- Lever: L - Solid Cast
Diagram Description: Illustrates the KL design lever and rose with dimensions: Lever length 4-7/8" (124mm), Rose diameter 2-3/8" (60mm), Projection from door 3-3/8" (86mm), +/- 3/8" (10mm) tolerance.
Special Order
B Lever Design
- Lever: B - Solid Cast
Diagram Description: Illustrates the B lever design with dimensions: Lever length 4-7/8" (125mm), Projection from door 1-3/8" (34mm).
P Lever Design
- Lever: P - Solid Cast
Diagram Description: Illustrates the P lever design with dimensions: Lever length 5-3/8" (136mm), Projection from door 2-3/8" (60mm), 3/8" (10mm) projection for thumbturn/button.
Functions
Single Cylinder Functions
04 Storeroom or Closet
Model: 65G04
- Deadlocking latch
- Latch by lever inside or key outside
- Outside lever rigid at all times
- ANSI/BHMA F86
Diagram Description: Lock mechanism illustration showing deadlocking latch and rigid outside lever.
37 Classroom
Model: 65G37
- Deadlocking latch
- Latch by either lever unless outside lever is locked by key
- Key in outside lever locks or unlocks outside lever
- Inside lever always operative
- ANSI/BHMA F84
Diagram Description: Lock mechanism illustration showing key-operated outside lever locking.
05 Entrance or Office
Model: 65G05
- Deadlocking latch
- Latch by either lever unless outside lever is locked by push/turn button in inside lever
- Push button released by key outside or lever inside
- Turn button must be released manually
- Key retracts latch when outside lever is locked
- ANSI/BHMA F109
Diagram Description: Lock mechanism illustration showing push-button locking on inside lever.
Non-Cylinder Functions
15 Passage
Model: 65U15
- Latch by either lever
- ANSI/BHMA F75
Diagram Description: Lock mechanism illustration for passage function.
15-3 Exit or Communicating (Special Order)
Model: 65G15-3
- Deadlocking latch
- Blank rose outside
- Latch by lever inside
- Minimum clearance of 1-1/2" (38mm) between double doors
Diagram Description: Lock mechanism illustration for exit/communicating function with blank outside rose.
65 Privacy/Bathroom
Model: 65U65
- Latch by either lever unless outside lever is locked by push button in inside lever
- Turning inside lever or closing door releases button
- Emergency button in outside lever unlocks, with use of a blade screwdriver outside lever and releases inside button
- Bathroom key (P/N 6267EMK) supplied only when ordered separately
- ANSI/BHMA F76
Diagram Description: Lock mechanism illustration for privacy/bathroom function with push-button lock and emergency release.
93 Single Lever Pull
Model: 65U93
- For wood or custom hollow metal doors
- Lever and rose attached by three surface applied screws
Diagram Description: Illustration of a single lever pull design.
94 Double Lever Pull
Model: 65U94
- For wood or custom hollow metal doors
- Lever and rose both sides through-bolted and three surface applied screws each side
Diagram Description: Illustration of a double lever pull design.
Cylinders
Finishes: 04, 15, BSP
| Type | Pins | Standard Cylinder | Interchangeable Core^ (Large Format) | Interchangeable Core^ (Small Format) |
|---|---|---|---|---|
| Conventional | 6 | C10-1 | 6300 | 7300B |
| 7 | N/A | N/A | 7P-7300B | |
| Signature | 6 | 10-C10-1 | 10-6300 | N/A |
| XC | 6 | 11-C10-1 | 11-6300 | N/A |
| 7 | N/A | N/A | 11-7P-7300B | |
| Degree® DG1 | 6 | DG1-C10-1 | DG1-6300 | N/A |
| Degree® DG2 | 6 | DG2-C10-1 | DG2-6300 | N/A |
| Degree® DG3 | 6 | DG3-C10-1 | DG3-6300 | N/A |
All cylinders are supplied with 2 nickel silver change keys. When cylinders are ordered keyed to 5 pin systems, the (6th) last chamber will be empty.
Cylinders are supplied 1-bitted unless specified keyed random or master keyed. For master keyed orders provide keying details as requested on SARGENT Keyed Order Lead Sheets, located in the price book or contact customer service.
To order cylinders separately, specify part number x keyway x finish (i.e. C10-1 x LA x 15)
^Locks will be provided with the applicable tailpiece per the type interchangeable and/or removable core being used.
For example standard cores and XC cores require different tailpieces. When ordering complete locks, the appropriate option code must be specified in accordance to the permanent core being used.
Cylinders with Competitive Keyways
| Competitive Keyway | Part Number |
|---|---|
| Schlage® C | SC-C10-1 |
| Schlage® E | SE-C10-1 |
These cylinders are 6-pin, 0-bitted and supplied with two brass key blanks. Cylinders include tail piece.
Refer to Cylinders and Components catalog for more information.
Interchangeable Core Tailpieces (replacement parts)
| Used with: | Type | P/N |
|---|---|---|
| 6300 | LFIC Conventional | 10-0239 |
| 10-6300 | LFIC Signature | |
| 11-6300 | LFIC XC | 10-3429 |
| DGX-6300 | LFIC Degree® | |
| 7300B | SFIC 6Pin | 10-0239 |
| 7P-7300B | SFIC 7 Pin | 10-0240 |
| 11-7P-7300B | SFIC XC | 10-3138 |
Note: Tailpieces included with lock.
See pages 11-12 for cylinder options when ordered with locks.
Latches
Finishes: 03, 04, 10B, 10BE, 32D, BSP
Plain/Unguarded Latch - 65U15, 65U65:
| Part No. | Front | Front Width | Backset | Throw |
|---|---|---|---|---|
| 05-2185 | Square Corner | 1" (25mm) | 2-3/8" (60mm) | 1/2" (13mm) |
| 05-2183 | Square Corner | 1-1/8" (29mm) | 2-3/4" (70mm) | 1/2" (13mm) |
Deadlocking/Guarded Latch - All Other Functions:
| Part No. | Front | Front Width | Backset | Throw |
|---|---|---|---|---|
| 05-2184 | Square Corner | 1" (25mm) | 2-3/8" (60mm) | 1/2" (13mm) |
| 05-2182 | Square Corner | 1-1/8" (29mm) | 2-3/4" (70mm) | 1/2" (13mm) |
Diagram Description: Illustrations show the difference between Plain/Unguarded and Deadlocking/Guarded latches.
Strikes
Finishes: 03, 04, 10B, 10BE, 32D, BSP
2-3/4" Curved Lip Strike (Standard)
Furnished standard with 1-1/4" (32mm) curved lip from center of strike screw holes to end of lip.
To order strike separately, specify 800 strike x finish x lip length. Lip lengths: 1" (25mm), 1-1/4" (32mm), 1-1/2" (38mm), 1-3/4" (44mm) and 2" (51mm).
Diagram Description: Shows dimensions for the 2-3/4" Curved Lip Strike.
4-7/8" Curved Lip Strike (28- Option)
Conforms to ANSI standard. Furnished standard with curved lip 1-1/4" (32mm) from center of strike screw holes to end of lip.
To order strike separately, specify 808 strike x finish x lip length. Lip lengths: 1-1/8" (29mm), 1-1/4" (32mm), 1-3/8" (35mm), 1-5/8" (41mm), 1-7/8" (48mm), 2-1/8" (54mm), 2-3/8" (60mm), 2-5/8" (67mm), 2-7/8" (73mm).
Diagram Description: Shows dimensions for the 4-7/8" Curved Lip Strike.
2-1/4" Full Lip Strike (14- Option)
Lip length 1-3/16" only.
To order strike separately, specify 505 strike x finish x lip length.
Diagram Description: Shows dimensions for the 2-1/4" Full Lip Strike.
Options
Mechanical Options
| Option Code | Description |
|---|---|
| 14- | Full Lip strike # 505 |
| 20- | 2-3/8" Backset |
| 28- | 4-7/8" Curved Lip Strike |
| 85- | Tactile Warning - abrasive coating finish on inside lever |
| 86- | Tactile Warning - abrasive coating finish on outside lever |
| 87- | Tactile Warning - abrasive coating finish on both levers |
Cylinder Options
Conventional Cylinder
| Code | Description |
|---|---|
| -- | Standard |
Degree Key System
| Code | Description |
|---|---|
| DG1- | Sargent Degree Key System Level 1 (bump resistant with patented keys) |
| DG1-21- | Degree Level 1 Construction Master Keying |
| DG1-60- | Degree Level 1 Removable Disposable Construction Core |
| DG1-63- | Degree Level 1 Removable Core |
| DG1-64- | Degree Level 1 Removable Construction Keyed LFIC |
| DG1-65- | Degree Level 1 Unassembled/Uncombinated Fixed Core Component Cylinder (packed loose for field keying) |
| DG1-63-65- | Degree Level 1 Unassembled/Uncombinated Removable Core LFIC (packed loose for field keying) |
| DG2- | Sargent Degree Key System Level 2 (geographically exclusive; bump and pick resistant) |
| DG2-21- | Degree Level 2 Construction Master Keying |
| DG2-60- | Degree Level 2 Removable Disposable Construction Core |
| DG2-63- | Degree Level 2 Removable Core |
| DG2-64- | Degree Level 2 Removable Construction Keyed LFIC |
| DG2-65- | Degree Level 2 Unassembled/Uncombinated Fixed Core Component Cylinder (packed loose for field keying) |
| DG2-63-65- | Degree Level 2 Unassembled/Uncombinated Removable Core LFIC (packed loose for field keying) |
| DG3- | Sargent Degree Key System Level 3 (geographically exclusive; UL437 certified; bump and pick resistant) |
| DG3-21- | Degree Level 3 Construction Master Keying |
| DG3-60- | Degree Level 3 Removable Disposable Construction Core |
| DG3-63- | Degree Level 3 Removable Core |
| DG3-64- | Degree Level 3 Removable Construction Keyed LFIC |
Signature Key System
| Code | Description |
|---|---|
| 10-** | SARGENT Signature Key System |
| 10-21- | SARGENT Signature Construction Key System (Lost Ball) |
Note: When tying into existing key systems contact Key Records for compatibility
** Available to match existing key systems, not recommended for Grade 2 applications
Signature: Large Format Interchangeable Core (Removable Core)
| Code | Description |
|---|---|
| 10-63- | SARGENT Signature LFIC (Removable Core) Cylinder |
XC- Key System
| Code | Description |
|---|---|
| 11- | XC Key System (not available with other Key Systems, unless specified) |
| 11-21- | XC- Construction Key System (Lost Ball) |
Cylinder Options (continued)
XC- Large Format Interchangeable Core (Removable Core)
| Code | Description |
|---|---|
| 11-60- | Hardware to accept XC- Permanent LFIC (Removable Core), Disposable plastic core provided |
| 11-63- | Hardware provided with XC- LFIC (Removable Core) Cylinder – (Includes masterkeying, grand masterkeying) |
| 11-64- | Hardware provided with Keyed construction core to accept XC- LFIC (Removable) Permanent Core (ordered separately) |
XC- Small Format Interchangeable Cores
| Code | Description |
|---|---|
| 11-70-7P | 11-70-7P Hardware to accept XC- SFIC (7-Pin) XC- Permanent Cores, plastic disposable core provided |
| 11-72-7P | Hardware to accept XC- SFIC (7-Pin Keyed Construction Core provided) cylinder Permanent core ordered separately |
| 11-73-7P | Hardware supplied with XC- Small Format 7-Pin interchangeable core (Includes masterkeying, grand masterkeying) |
| 11-65-73-7P | Hardware provided to accept XC- Uncombinated 7-Pin SFIC (Permanent) Core -- (Packed Loose) |
Construction Key Systems
| Code | Description |
|---|---|
| 21- | SARGENT Lost Ball Construction Keying for Conventional, XC and Signature Series (N/A with 63- or 73-) |
| 22- | SARGENT Construction Split Key System for Conventional Cylinders (existing systems only) (N/A with 10-, 11-, 63- or 73-) |
Large Format Interchangeable Core (Removable Core)
| Code | Description |
|---|---|
| 60- | Hardware to accept SARGENT Permanent LFIC (Removable Core), disposable plastic core provided (Permanent Cores Ordered Separately) |
| 63- | Hardware provided with LFIC (Removable Core) Cylinder — (includes masterkeying, grand masterkeying) |
| 64- | Hardware provided with Keyed construction core to accept LFIC (removable) Permanent Core (ordered separately) |
| 70- | Hardware to accept 6 or 7-Pin SFIC permanent cores, plastic disposable core provided |
| 72- | Hardware to accept 6 or 7-Pin SFIC (Keyed Construction Core provided) Cylinder (permanent core ordered separately) |
Small Format Interchangeable Cores
| Code | Description |
|---|---|
| 73- | Hardware supplied with 6-Pin SFIC (includes masterkeying, grand masterkeying) |
| 65-73- | Hardware provided to accept Uncombinated 6-Pin SFIC (permanent) core -- (packed loose for field keying) |
| 65-73-7P | Hardware provided to accept Uncombinated 7-Pin SFIC (permanent) core -- (packed loose for field keying) |
| 73-7P | Hardware supplied with Small Format 7-Pin Interchangeable Core (includes masterkeying, grand masterkeying) |
Bump Resistant
| Code | Description |
|---|---|
| BR- | Bump Resistant Cylinder (available with Conventional & Conventional XC Cylinders only) |
Keyed Different
| Code | Description |
|---|---|
| KD- | Cylinders provided keyed differently/random |
Less Cylinder
| Code | Description |
|---|---|
| LC- | Lock supplied less Cylinder |
Schlage Keyways
| Code | Description |
|---|---|
| SC- | Schlage C keyway cylinder, 0 bitted |
| SE- | Schlage E keyway cylinder, 0 bitted |
Note: When tying into existing key systems contact Key Records for compatibility
Finishes/How to Order
| SARGENT # | Descriptions | ANSI/BHMA |
|---|---|---|
| 03 | Polished brass, clear coated | 605 |
| 04 | Satin brass, clear coated | 606 |
| 10B | Oxidized bronze, oil rubbed | 613 |
| 10BE | Dark Oxidized Satin Bronze - equivalent | 613E |
| 26 | Polished chrome | 625 |
| 26D | Satin chrome | 626 |
| BSP | Black suede powder coat | BSP |
Zinc levers are plated to match ANSI/BHMA finish.
Split finishes available on all functions:
- Specify outside first i.e. 65G05 x KL x 26D x 03 x RH
- Handing must be specified
- Strike and latch front will match the following: RH & LH = inside finish; RHR & LHR = outside finish
| Lock Finish | Cylinder/Core* |
|---|---|
| 03, 04, 10B, 10BE | 04 |
| 26, 26D | 15 |
| BSP | BSP |
*Finish when cylinder provided with lock
How to Order
| Options | Line | 65 | G05 | K | L | 26D |
|---|---|---|---|---|---|---|
| Page 10 | Functions | Functions | Rose | Lever | Finish | |
| G04 | 03 | |||||
| G05 | 04 | |||||
| U15 | 10B | |||||
| G37 | 10BE | |||||
| U65 | 26 | |||||
| U65 | 26D | |||||
| U94 | BSP |
Special Order
The B & P Levers, the 15-3 function and split finishes are available as special orders, please contact SARGENT for details.
Packaging
| Product | Weight | Quantity |
|---|---|---|
| 65G05 KL | 4 lbs. | 1/box |
| 65G05 KL | 41 lbs. | 10 boxes/case |
Company Information
The ASSA ABLOY Group is the global leader in access solutions. Every day, we help billions of people experience a more open world.
ASSA ABLOY Opening Solutions leads the development within door openings and products for access solutions in homes, businesses and institutions. Our offering includes doors, frames, door and window hardware, locks, perimeter fencing, access control and service.
SARGENT Manufacturing Company
100 Sargent Drive
New Haven, CT 06511 USA
800-727-5477
www.sargentlock.com
Founded in the early 1800s, SARGENT® is a market leader in locksets, cylinders, door closers, exit devices, electro-mechanical products and access control systems for new construction, renovation, and replacement applications. The company's customer base includes commercial construction, institutional, and industrial markets.
Copyright © 2004-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
