WUBEN Gecko E61 Multifunctional Penlight
Warnings
- Please read the user manual carefully before using the light.
- The product will generate heat while working; please be cautious to avoid any possible harm.
- Do not shine into eyes directly to avoid harm to eyes.
- Please keep the light away from children.
- Please use WUBEN or WUBEN recommended batteries.
- Do not disassemble the product, or it will not be covered by WUBEN warranty policy.
- Do not throw the product into fire.
- This is not a diving product; please do not use it underwater for a long time.
Package List
Before using this product, please check whether the contents of the package are complete.
- Gecko E61 × 1
- Ink-less pen × 1
- Stylus pen × 1
- Ballpoint pen refill × 4
- Micro-USB charging cable × 1
- User manual, warranty card, quality certificate × 1
Product Operation
1. About Product
The Gecko E61 is a multifunctional penlight. The flashlight body can be rotated 270°, emitting a maximum output of 130 lumens, with red and blue beacon lights function. It has a built-in 120 mAh Li-polymer battery and utilizes a convenient Micro-USB charging design. The multifunctional pen is designed with a 180° rotating hidden type. Both ends are optional to replace with a stylus pen, ink-less pen, ballpoint pen, or zirconium bead head, and can be easily and quickly replaced according to users' demands.
Diagram Description: The diagram shows the penlight with labels pointing to the Micro-USB charging port, the body, and the switch which also functions as the battery power indicator and breathing light. The multifunctional pen (zirconium bead head, ballpoint pen head) is also depicted.
2. Installation
Replacement method of the multifunctional pen.
Diagram Description: A sequence of six images illustrates the process of replacing the pen tip. It shows unscrewing the end cap, removing the existing tip, inserting a new tip, and screwing the cap back on. A warning symbol with an exclamation mark indicates that you need to click the switch 4 times to unlock the product when using it for the first time.
3. Operation
- ON/OFF: Single click the switch to turn the flashlight on, and click again to turn it off. Output selections and red/blue beacon lights have a memory function when the power is off.
- Output Selections: When the flashlight is on, long press the switch to cycle through Low, Medium, High, and Low brightness levels. The brightness will be locked once the switch is released at any mode.
- Flash Modes: Double-click the switch to activate red and blue beacon lights in any mode. Long press the switch to cycle through the main light modes; the brightness will be locked once released. A single click exits the flash mode.
4. Breathing Light
When the flashlight is on or off, triple-click the switch to turn the blue breathing light on or off. In standby mode with the main light off, it lasts for 5 days. It is used to easily find the switch in the darkness. It is recommended to turn it off when not needed to save battery power.
5. Lockout/Unlock
When the flashlight is off, perform 4 clicks on the switch. The main light will blink 3 times to indicate the lockout status. Any operations on the switch will be invalid until another 4 clicks on the switch are performed, which will activate the Low mode, indicating the flashlight is unlocked.
6. Charging
Open the flashlight body, connect the Micro-USB charging cable and a 5V/1A adapter to charge. It takes approximately 2 hours to be fully charged.
Diagram Description: An illustration shows a Micro-USB cable being plugged into the charging port of the penlight.
7. Charging Status Indication
| Status | Indication |
|---|---|
| Charging | Red light constant on |
| Charging finished | Blue light constant on |
8. Battery Capacity (C) Status Indication
| Battery Capacity | Status Indication |
|---|---|
| C ≥ 90% | Blue light constant on (off after 5 seconds) |
| 90% > C ≥ 40% | Blue light flashes (off after 5 seconds) |
| 40% > C ≥ 15% | Red light constant on (off after 5 seconds) |
| 15% > C > 0 | Red light flashes |
Parameters
| Parameters | High | Med | Low | Red and Blue Beacon Lights |
|---|---|---|---|---|
| Lumen Output | 130~40 Lumens | 30 Lumens | 3 Lumens | 10 Lumens |
| Runtime | 1h 45mins | 2.5 Hours | 15 Hours | / |
| Beam Distance | 8 Meters | [No symbol] | [No symbol] | 1 Meter |
| Waterproof Level | [No symbol] | [No symbol] | [No symbol] | IP66 |
| Weight | 54g/1.9oz (without battery) | |||
| Dimensions (L×W×H) | 143mm × 17.8mm × 12.5mm | 5.63in × 0.7in × 0.49in | |||
Note: All data are from experiments conducted by WUBEN lab according to quality test standards. Results may vary due to different experimental equipment, environments, or other factors. Experiments are based on a WUBEN Li-Polymer battery of 120 mAh.
Maintenance
- When the product shows low power, please recharge it in time to avoid affecting its use.
- When not in use for a long time, please recharge it every 3 months to ensure the durability of the battery.
- Please cover the rubber piece of the USB ports well after recharging or discharging to avoid foreign matter.
- Please store the product in a dry and ventilated place.
FAQs
| Problems | Causes | Solutions |
|---|---|---|
| Abnormal flash or failure to turn on | Check if the switch is lockout | Unlock the switch |
| Check if the switch is turned on correctly | Turn on the switch | |
| Abnormal noise | Check if foreign matter falls in the tube | Pour out possible foreign matter |
| Part damage | Contact your seller |
If your problems are still not solved, please contact WUBEN Headquarters for after-sales service.
Warranty Policy
1. Warranty Coverage
- 15 days replacement: Within 15 days from the date of purchase, if the product has quality problems, customers can request free replacement.
- 1 year warranty: Within 1 year from the date of purchase, if the product has quality problems, WUBEN will offer free repair.
- Battery warranty: WUBEN offers a 1-year warranty for the rechargeable batteries, but other included accessories are not covered by the warranty.
- Lifetime maintenance: From the date of purchase, if the product has a problem after 1 year, WUBEN will offer paid repair for WUBEN registered customers.
- If proof of purchase cannot be provided, it will be counted from the date of manufacture.
- If there is any dispute, the two parties will coordinate to solve.
2. Beyond Warranty
- Man-made damage.
- Damage caused by not following the instructions.
- Damage caused by improper use of the battery.
- Abnormal wear and tear.
- Damage caused by irresistible factors.
- Gifts.
The final interpretation right is reserved by WUBEN.
