Lumintop Moonbox User Manual

Specifications

Note: The above approximate parameters were tested using the built-in 21700 Li-ion battery and may vary depending on the battery and test environment. Runtime on High and Turbo modes are accumulated values due to temperature control protection settings.

Model Number: LMT-CF1117-230901

Operation Instructions

Side Switch (S) Operations:

• On/Off: Single click the side switch to turn on, press and hold to turn off.
• Output Shifting: While the flashlight is on, single click the side switch to cycle through modes (Moonlight, Low, Medium, High).
• Moonlight Mode: From OFF state, press and hold the side switch.
• SOS Mode: From Moonlight mode, double-click the side switch twice quickly.
• Side Light Mode: From OFF state, double-click the side switch to enter side light mode. Single click to cycle through modes: Red Blue blink, Red blink, White light. Press and hold to turn off.
• Battery Check: From OFF state, triple-click the side switch to enter battery status indication. For example, 3.8V is indicated by the main light blinking 3 times, followed by a short pause, then blinking 8 times. The indicator cycles 3 times before turning off (or press once to turn off).
• Lock-out/Unlock Mode: From OFF state, quadruple-click the side switch to enter lock-out mode. In lock-out mode, a click turns on the light on low brightness until the button is released. Quadruple-click again to unlock.
• Switch Backlit Light ON/OFF: From OFF state, seven clicks of the side switch to turn the backlit light on or off.

Tail Switch Operations:

• Turbo: Click and hold the tail switch to activate Turbo mode. Release the switch to exit.
• Strobe: Quickly double-click and hold the tail switch to activate Strobe mode. Release the switch to exit.

Protection Features

Low-voltage Protection

The flashlight automatically adjusts output to protect the battery:

• When battery voltage drops below 3.2V, all modes (except Moonlight) are limited to 60% of their maximum brightness.
• When battery voltage drops below 3.1V, a low battery warning (main light flashes) is activated, and output is limited to 20% of maximum brightness (except Moonlight).
• At 3.0V, only Moonlight mode is accessible.
• At 2.9V, the flashlight will automatically shut off.

Over-heat Protection

To ensure user comfort and safety, the flashlight has temperature and time protection. In Turbo and Strobe modes, after 30 seconds of operation or when the temperature becomes too high, the flashlight will automatically reduce brightness or stop working. Brightness can be restored after the temperature decreases.

USB C Charging / Powerbank Function

• Charging input supports QC3.0/PD3.0 fast charging, with a maximum battery charging current of 4.0A and adaptive current adjustment.
• Output current capabilities: 5V: 3.0A, 9V: 2.0A, 12V: 1.5A.
• During charging, the display shows input voltage, input current, battery percentage, battery voltage, and battery charging current.
• During discharging (powerbank function), the display shows output voltage, output current, and battery percentage.

Warranty Terms

1. 30-Day Replacement: Within 30 days of purchase, if product quality issues occur under normal use, customers can choose replacement or repair. Replaced products will be of the same model and specifications; if discontinued, a comparable Lumintop product will be provided.
2. 5-Year Warranty: Within 5 years of purchase, Lumintop provides free repair services for quality issues under normal use. (Note: Products with built-in non-removable batteries have a 2-year warranty; accessories have a 1-year warranty).
3. Lifetime Paid Warranty: For repairs exceeding the free warranty period, Lumintop offers lifetime paid repair services. Costs are based on actual replacement materials; shipping fees are the customer's responsibility. No labor fees are charged.
4. Warranty Exclusions: This warranty does not cover defects caused by normal wear and tear, rough handling, force majeure events, or other human-induced factors.

Safety Warnings

• High Light Intensity: The flashlight's light intensity is extremely high. Never point the beam directly at eyes, animals, moving vehicles, or flammable materials to avoid blindness, fire, or other hazards.
• Fire Hazard: Do not throw the flashlight into fire to prevent explosion.
• Battery Maintenance: If the flashlight is not used for an extended period, charge it every 3 months to maintain battery performance.
• Transport and Storage: During transport, storage, or carrying, set the flashlight to lock-out mode to prevent accidental activation.
• Child Safety: Keep out of reach of children.

Manufacturer Information

Made in China

Lumintop Technology Co., Ltd.

Address: 11th Floor, Block B, Tianhengda Industrial Park, No.2 Chengxin Road, Longgang District, Shenzhen, China

Website: www.lumintop.com

Phone: +86-755-88838666

Certifications: CE, ANSI, RoHS, UIS, ISO, FC, UK CA, ISO9001