DROP CSTM80 Keyboard Quick Start Guide
Welcome to your new CSTM80 keyboard. This guide will help you get started.
Initial Setup
The keyboard should work with macOS, Windows, and Linux operating systems right out of the box.
For customization instructions, scan the QR code or visit dro.ps/cstm80-quickstart.
Pre-set Shortcut Keys
Hold down the Fn key and press the listed keys to activate functions.
LED Functions
| Fn + Key | LED Function |
|---|---|
| W | Increase LED Brightness |
| S | Decrease LED Brightness |
| E | Increase Key Repeat Speed |
| D | Decrease Key Repeat Speed |
| R | Increase Key LED Speed |
| F | Decrease Key LED Speed |
| T | Increase Key Saturation |
| G | Decrease Key Saturation |
| Q | Toggle LED (On / Off) |
| A | Toggle Key Repeat |
| Z | Mono Color Mode |
| X | Breathing Effect Mode |
| C | Rainbow Storm Mode |
| V | Rainbow Cycle Mode |
Other Controls
Hold down the Esc key (before connecting USB) to trigger a Magic Boot (Clear EEPROM State and reboot into Bootloader).
Keyboard Option Keys
Hold down the Fn key and press the listed keys for additional options.
| Fn + Key | Function |
|---|---|
| N | Toggle between 6KRO/NKRO (6KRO is default) |
| LCtrl+O | Switch between Windows / Mac OS (System/Alt setting) |
| LCtrl + | | LCtrl / Capslock Swap |
| LCtrl + Backspace | Reset Keyboard |
Customization
To set your keymap and shortcuts, visit dro.ps/cstm-configurator.