Specifications
| Type | Specification |
|---|---|
| Motherboard Support | mATX, ITX |
| Dimensions | 318(L) x 210(W) x 398(H) mm |
| 3.5" HDD Drive Bay | 1 |
| 2.5" SSD Drive Bay | 1 |
| Expansion Slots | 4 |
| Maximum GPU Length | 310mm |
| Maximum CPU Cooler Height | 165mm |
| Maximum PSU Length | 160mm |
Panel Removal
- Remove the two screws at the back and then slide the tempered glass (TG) panel out as shown.
- Remove the side panel and remove the screw as shown.
- Slide the front TG Panel following this direction.
Front Panel I/O Connections
Buttons and Activity Lights
These cables connect to the motherboard for the power button (power sw), reset button, HDD LED, and power LED (P+/P-).
HD Audio
This connector attaches to your sound card or motherboard and is used to provide the front panel mic input and headphone output.
USB 3.0 Connector
This cable connects to the USB 3.0 header on the motherboard to enable the front USB 3.0 ports.
Component List
| Visual | Item | QTY | Application |
|---|---|---|---|
| [Screw with washer] | Motherboard & SSD screw | 10 | Motherboard and 2.5 hard drive installation |
| [Standoff] | Motherboard standoff | 7 | Motherboard installation |
| [Phillips screw] | HDD mount screw | 4 | 3.5 hard drive installation |
| [Flanged screw] | PSU & Rear expansion slot screw | 5 | Power supply installation, Mounting of GPU and other expansion cards |
| [Cable tie] | Cable tie | 10 | Cable management |
Motherboard Installation
Diagram shows the internal layout of the case with mounting points for ATX, Micro-ATX, and Mini-ITX motherboards. Use Screw Type A & B for installation.
SSD / HDD Installation
Diagram illustrates the placement of the HDD and the removable SSD tray within the case. Use Screw Type A & C for installation.
GPU & PSU Installation
Graphics Processing Unit (GPU) and other expansion cards
Diagram shows the maximum GPU length clearance is 310mm. Use Screw (Type D) for mounting expansion cards.
Power Supply Unit (PSU) Installation
Diagram shows the PSU mounting area with a maximum PSU length of 160mm. Use Screw (Type D) for PSU installation.
CPU Cooler / Fan Installation
The case supports CPU coolers up to 165mm in height.
Rear: Supports 1x 120mm ARGB Fans (Included).
Top: Supports 2x 120mm ARGB Fans (Included) or up to a 240mm Radiator.
Bottom: Supports 2x 120mm Fans (Optional).
Package Contents
- 1 x TECWARE INFINITY M2 Case
- 1 x Bag of Accessories
Warranty
1 Year. Please contact your local distributor for support.
Visit www.tecware.co for more information.