ℹ️ Document Conversion Notice: This page was converted from the original file for easier reading. Diagrams/images may appear only in the original PDF below.
Document preview
File info: application/pdf · 2 pages · 249.89KB

FPG Inline 5000 Series 800 Freestanding/Square Ambient

Product Overview and Technical Specifications

Key Features

  • High energy efficiency: 0.05 kWh per hour (average)
  • Cabinet operating at ambient temperature
  • Smart display with double-glazed glass finished with a black trim
  • Fixed Front or Sliding Doors Ambient Display options
  • Three tiltable, height-adjustable stainless steel shelves and base for maximum display capacity
  • 50,000 hour LED lighting system (2758 lumens per metre) in cabinet top and to each shelf
  • Unique 30mm shelf-mounted ticket strip front and rear

Operational Excellence

  • Sliding doors (staff side) and fixed front or sliding doors options (customer side)
  • Constructed from stainless and mild steel with double-glazed, toughened safety glass
  • Fan-assisted air circulation to mitigate heat build-up
  • Designed for installation into joinery
  • Fitted with adjustable 150mm legs (+30mm adjustment)

Specifications

General

Range Temperature Model Front Installation Height Width Depth
INLINE 5000 SERIES AMBIENT IN-5A08-SQ-FF-FS / IN-5A08-SQ-SD-FS SQUARE/ FIXED FRONT / SQUARE/ SLIDING DOORS FREESTANDING 1443mm 807mm 770mm

Core Product Temperature

CORE PRODUCT TEMPERATURE AMBIENT

Electrical Data

MODEL VOLTAGE PHASE CURRENT E24H (kWh) kWh per hour (average) IP RATING MAINS CONNECTION CONNECTION PLUG HOURS LUMENS COLOUR
IN-5A08-SQ-XX-FS 220-240 V Single 0.23 A 1.20 0.05 IP 22 3 metre, 3 core cable 10 amp, 3 pin plug 50,000 2758 per metre Natural

Note: Please advise country to change plug specification.

Capacity, Access & Construction

MODEL DISPLAY AREA LEVELS ACCESS FRONT ACCESS REAR CHASSIS CONSTRUCTION
IN-5A08-SQ-FF-FS 1.3 m² 3 Shelves + Base Fixed front Sliding doors Stainless 304 and mild steel
IN-5A08-SQ-SD-FS 1.3 m² 3 Shelves + Base Sliding doors Sliding doors Stainless 304 and mild steel

Dimensions & Mass

MODEL H x W x D mm (Uncrated) MASS (Uncrated)
IN-5A08-SQ-XX-FS 1443 x 807 x 770 108 kg

Note: Crated weights and dimensions vary. Please contact FPG for information on your shipment.

Diagrams and Dimensions Description

The following describes the key dimensions and views of the appliance:

  • Plan View: Shows the appliance width (807mm Overall Appliance) and depth (770mm Overall Appliance). Internal dimensions include shelf width (730mm Shelf Width) and base width (748mm Base Width). The required benchtop cutout dimensions are 760mm x 725mm.
  • Front Elevation: Displays the overall height of the appliance (1443mm (+30mm) Overall Appliance) and width.
  • Section View: Illustrates the depth of the appliance and the arrangement of shelves. Key internal vertical measurements are indicated: 163mm (top section), 132mm (shelf 1), 132mm (shelf 2), 150mm (base). Total internal height is 683mm. The joinery height is 603mm.
  • Rear Elevation: Shows the cable exit point (270mm from base) and cable length (3 meters).

Installation Notes

Model cutout dimensions for IN-5A08-SQ-XX-FS models require a 760mm x 725mm benchtop cutout. The joinery height required is 603mm. Refer to the product manual for detailed installation guidance. When installing this cabinet next to an adjacent Inline 5000 Series refrigerated cabinet, an Inline 5000 Series thermal divider panel (accessory) must be installed between them.

Options & Accessories

  • Shelf trays: Available in toughened safety glass or mild steel. Colour and woodprint options are available for steel shelf trays.
  • Front access: Tilt front option.
  • Angled base insert.
  • Branded decals.
  • Rear door or end glass mirror application.
  • Adjustable 100mm legs (+25mm adjustment), lockable castors, or unidirectional rollers.
  • External stainless steel chassis surround.
  • Rear deck assemblies.
  • Thermal divider panels.
  • Custom joinery solution.

Indicates sustainability benefits.

Certifications: ASNZ FOOD Standards, CE, IEC. Please contact FPG to discuss requirements for meeting country-specific standards.

For more information, including technical data and installation guidelines, please refer to the Product Manual available on the FPG website.

Contact FPG: sales@fpgworld.com or visit www.fpgworld.com for full contact details.

© 2025 Future Products Group Limited

Models: 5000 Series Food Display Solutions, 5000 Series, Food Display Solutions, Display Solutions, Solutions

Original Document

If the viewer doesn’t load, open the PDF directly.