Overview
This document details the Fireye MEUV1, MEUV4, MEUVS1, MEUVS4, MEIR1, MEIR4, MERT1, MERT4, MECD1, and MECD4 amplifier modules. These modules are integral components for the Fireye Modular MicroM™ control system, enabling advanced flame scanning capabilities.
Key Features
The amplifier modules support a range of Fireye flame scanners, including ultraviolet, self-check, infrared, and cadmium sulfide types, as well as flame rods. They offer a uniform 0-10 vdc output for flame signal measurement and feature a plug-in design for straightforward installation within the Modular MicroM chassis.
Application and Installation
Proper application and safe operation require referring to specific Fireye bulletins, such as MC-5000, for detailed descriptions of the Modular MicroM control, installation procedures, and operating sequences. The document emphasizes the importance of selecting the correct amplifier module for the chosen scanner and adhering to installation instructions to ensure safe and effective operation.
Ordering Information
Detailed ordering information is provided, listing specific amplifier models and their corresponding scanner compatibility, FFRT (Flame Failure Response Time), and relevant bulletins. A comprehensive list of compatible flame scanners and associated parts and accessories is also included to facilitate system configuration.
Important Safety Notice
A critical warning is issued regarding the selection and application of these controls. It is recommended that selection be performed by a competent, licensed professional to prevent unsafe conditions. Installation is considered incomplete until pilot turndown and other performance tests are successfully performed.