USB Type-C Hub UC-TV8BK
This document provides instructions for the USB Type-C Hub (Model: UC-TV8BK).
Table of Contents
The table of contents is omitted as per instructions.
Introduction
The USB Type-C Hub (Model: UC-TV8BK) is designed to expand the functionality of your USB Type-C port. It supports various connections including USB 3.2 Gen 1 (SuperSpeed Data Link), Gigabit Ethernet, and HDMI. This hub allows you to connect multiple devices, display content on external monitors, and access wired networks, enhancing your productivity and connectivity.
Important Notes
Please read the following precautions carefully before use.
- Ensure the product is used within its specified operating environment.
- Handle the product with care to avoid damage.
- Do not expose the product to water or excessive moisture.
- Avoid using the product in direct sunlight or near heat sources.
- Keep the product away from strong magnetic fields.
- Do not disassemble or modify the product.
- If the product malfunctions, refer to the troubleshooting section or contact customer support.
Product Overview
The USB Type-C Hub is equipped with several ports to enhance your device's capabilities.
- USB 3.2 Gen 1 (SuperSpeed Data Link, USB-C): For connecting USB devices and high-speed data transfer.
- Gigabit Ethernet (RJ-45): For wired network connectivity.
- HDMI: For connecting to external displays.
- USB 3.2 Gen 1 (SuperSpeed Data Link, USB-A): For connecting USB devices.
Specifications
This section details the technical specifications of the USB Type-C Hub.
| Item | Specification |
|---|---|
| Model Name | UC-TV8BK |
| Interface | USB Type-C (DisplayPort Alternate Mode) |
| Supported OS | Windows 11, Windows 10, macOS (12 or later) |
| Ports |
|
| Power Delivery | Up to 100W (PD 3.0) |
| Cable Length | Approx. 0.3m |
| Dimensions | Approx. 115mm x 50mm x 15mm (excluding cable) |
| Weight | Approx. 70g |
Connecting the Hub
Follow these steps to connect the USB Type-C Hub to your device.
- Connect the USB Type-C cable of the hub to the USB Type-C port on your computer that supports DisplayPort Alternate Mode.
- Connect your peripheral devices (USB drives, keyboard, mouse, monitor, Ethernet cable) to the corresponding ports on the hub.
- If using Power Delivery, connect a USB-C power adapter to the USB Type-C PD port on the hub.
Using the Hub
This section describes how to use the various functions of the hub.
USB Type-C Port (Power Delivery)
The USB Type-C port on the hub supports Power Delivery (PD) up to 100W. This allows you to charge your connected device while using the hub. Connect a USB-C power adapter to this port.
USB Type-A Ports
Connect USB devices such as external hard drives, USB flash drives, keyboards, and mice to these ports. These ports support USB 3.2 Gen 1 speeds for fast data transfer.
HDMI Port
Connect an external monitor or display to the HDMI port. The hub supports resolutions up to 4K at 30Hz. Ensure your computer and display support these resolutions.
Gigabit Ethernet Port
Connect an Ethernet cable to this port for wired network access. This port supports Gigabit Ethernet speeds (1000Mbps).
Troubleshooting
This section provides solutions for common issues.
Issue: The hub is not recognized by the computer.
- Ensure the USB Type-C cable is securely connected to the computer.
- Try connecting the hub to a different USB Type-C port on your computer.
- Restart your computer.
- Ensure your computer's operating system is up to date.
- Check if the USB Type-C port on your computer supports DisplayPort Alternate Mode.
Issue: No video output to the external monitor.
- Ensure the HDMI cable is securely connected to both the hub and the monitor.
- Check that the monitor is powered on and set to the correct input source.
- Verify that your computer's graphics card and operating system support the desired resolution and refresh rate (e.g., 4K@30Hz).
- Try a different HDMI cable.
Issue: Network connection is not working.
- Ensure the Ethernet cable is securely connected to the hub and the network router/switch.
- Check that the network cable is functioning correctly.
- Restart your computer and network router.
- Verify that the network adapter drivers are installed and up to date.
Issue: Power Delivery is not charging the connected device.
- Ensure you are using a USB-C power adapter that supports Power Delivery (PD) and has sufficient wattage.
- Check that the USB-C power adapter is properly connected to the hub's PD port.
- Verify that the USB Type-C port on your computer supports PD.
Precautions
Please observe the following precautions when using the product.
- The USB Type-C port on the hub is for charging the connected device only and cannot be used for data transfer or video output.
- When using the hub, ensure the total power consumption of connected devices does not exceed the power supply capabilities of your computer or the hub.
- The hub may become warm during operation, which is normal.
- Do not use the hub with devices that require extremely high power consumption.
- The hub is designed for use with computers. Compatibility with other devices may vary.
- Ensure the connected devices are compatible with USB Type-C and the hub's specifications.
- The warranty is valid only in Japan. No customer support is available for inquiries, purchases, or usage from countries other than Japan.
Contact Information
For inquiries, please contact ELECOM Co., Ltd. Japan.
Warranty Information
This warranty is valid only in Japan. In ELECOM Co., Ltd. Japan, no customer support is available for inquiries, purchases, or usage from any countries other than Japan.