dynamic BIOSENSORS 10X BUFFER HE140 PH 7.4 Running Buffer User Manual

10x Buffer HE140 pH 7.4: running buffer

Original Document

If the viewer doesn’t load, open the PDF directly.

Extracted Text

heliX+
User Manual
10X BUFFER HE140 PH 7.4
running buffer
Dynamic Biosensors GmbH & Inc. BU-HE-140-10 v2.1

Product Description

Order Number: BU-HE-140-10

Table 1. Contents and Storage Information

Material

Composition

10x Buffer HE140 pH 7.4 100 mM HEPES, 1.4 M NaCl, 500 �M EDTA, 500 �M EGTA and 0.5 % Tween20; 0.2 �m sterile filtered

Amount 50 mL

Storage 2-8�C

For research use only. This product has a limited shelf life, please see expiry date on label.

Preparation
Dilute the complete solution 10x Buffer HE140 pH 7.4 (50 mL) by mixing with 450 mL ultrapure water. After dilution HE140 Buffer is ready for use (10 mM HEPES, 140 mM NaCl, 50 �M EDTA, 50 �M EGTA and 0.05 % Tween20). The diluted buffer should be stored at 2-8�C.

BU-HE-140-10 v2.1

www.dynamic-biosensors.com

Page 1 of 2

Contact

Dynamic Biosensors GmbH Perchtinger Str. 8/10 81379 Munich Germany

Dynamic Biosensors, Inc. 300 Trade Center, Suite 1400 Woburn, MA 01801 USA

Order Information order@dynamic-biosensors.com Technical Support support@dynamic-biosensors.com

www.dynamic-biosensors.com
Instruments and chips are engineered and manufactured in Germany. �2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.

BU-HE-140-10 v2.1

www.dynamic-biosensors.com

Page 2 of 2