Conceptronic BIAN09G Quick Installation Guide

Brand: Conceptronic

Product Overview

The Conceptronic BIAN09G is a versatile card reader designed for fast data transfer. It supports CFast 2.0, SD, SDHC, SDXC, Micro SD, Micro SDHC, and Micro SDXC memory card formats, connecting to your computer via USB-C.

Diagram

The diagram illustrates the connection setup for the Conceptronic BIAN09G card reader. It shows a USB-C connector on the left, leading to the card reader device. An arrow indicates the connection from the card reader to a computer's USB-C port. On the right, a CFast 2.0 card and an SD/TF card are depicted, with arrows showing them being inserted into the card reader. The setup demonstrates how to connect the card reader to a computer to access data from CFast, SD, or TF memory cards.

Specifications

Connector	USB version (Speed)	Memory card supported	Capacity	Material	Dimensions (W x D x H)	Cable length	Weight	Package contents
USB-C male	USB 3.2 Gen 2 (10Gbps)	CFast 2.0, SD/SDHC/SDXC, Micro SD/T-Flash, Micro SDHC, Micro SDXC	CFast 2.0: 1TB, SD/TF: 2TB	Aluminum alloy + ABS	64 x 73 x 15 mm	15cm	65g	BIAN09G, Quick Installation Guide

System Requirements

Windows 7/8/10/11
macOS, ChromeOS, Android
PC, laptop with available USB-C port

Installation and Usage

Connect the card reader to a compatible USB-C port on your computer (USB 3.2 Gen 2 is recommended for optimal performance).
Carefully insert your CFast 2.0, SD, or TF card into the appropriate slot on the card reader until it is fully and securely seated. No drivers are required.
Before disconnecting the card reader or removing the card, safely eject it from your computer to prevent data loss.

Safety and Warning Instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, Conceptronic assumes no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

Keep the device away from water, humidity, fire, or hot environments.
Keep your device and all its parts and accessories out of the reach of small children.
Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
Avoid dropping, throwing, or crushing the device.
Do not open, change, or damage the device.
Disconnect the product from the power source before cleaning.
Clean the product with a dry, fibre-free cloth.

Disposal of Waste Electrical Equipment

Dispose of the product at a recycling point. Do not dispose of together with household waste. Incorrect storage/disposal can harm the environment and/or cause injury. ♻️

Compliance Markings

CE / UKCA marking: Conceptronic declares that this product complies with the directives listed in the section 'Declaration of Conformity'.

Support