Important Safety Information
Please read and follow all instructions and safety recommendations carefully. Failure to do so may result in damage to the product or injury to the user.
- This product is designed for interior use only.
- Keep packaging materials out of reach of children, as some parts may pose a choking hazard.
- Before assembly, check that the product is complete and undamaged. If parts are missing or defective, contact the seller before proceeding.
- Warning: This product is not suitable for children under three years of age due to small parts that could be swallowed, posing a life-threatening risk.
- The seller is not liable for damage caused by improper assembly or handling.
- Assemble all parts in the correct sequence.
- Keep the cat tree dry.
- Retain these instructions for future reference.
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| A | Base Platform (82 mm) | 1 |
| B | Post (250 mm) | 1 |
| C | Post (250 mm) | 1 |
| D | Post (250 mm) | 1 |
| E | Post (320 mm) | 1 |
| F | Post (320 mm) | 1 |
| G | Post (385 mm) | 1 |
| H | Platform/Bed (225 mm) | 1 |
| P1 | Platform/Bed (175 mm) | 1 |
| P2 | Screw (M8 x 20 mm) | 4 |
| P3 | Screw (M8 x 35 mm) | 3 |
| P4 | Screw (M8 x 50 mm) | 4 |
| P5 | Screw (M8 x 65 mm) | 22 |
| P6 | Accessory/Connector | 1 |
| P7 | Accessory/Connector | 4 |
| P8 | Accessory/Connector | 3 |
| P9 | Accessory/Connector | 4 |
| P10 | Accessory/Connector | 1 |
| W1 | Washer | 4 |
| W2 | Washer | 1 |
| W3 | Washer | 2 |
| W4 | Washer | 1 |
| W5 | Washer | 2 |
| M1 | Assembly Tool (Allen Key) | 1 |
Note: Parts P6 through P10 are accessories or connectors not explicitly detailed in the assembly diagrams.
Assembly Instructions
- Attach Post (B, 250 mm) to Base Platform (A, 82 mm) using one Screw (P2, M8 x 20 mm) and one Washer (W1).
- Attach Post (C, 250 mm) to Base Platform (A, 82 mm) using one Screw (P2, M8 x 20 mm) and one Washer (W1).
- Attach Platform/Bed (H, 225 mm) to Post (B, 250 mm) using one Screw (P3, M8 x 35 mm) and one Washer (W2).
- Attach Post (D, 250 mm) to Platform/Bed (H, 225 mm) using one Screw (P4, M8 x 50 mm) and one Washer (W3).
- Attach Platform/Bed (P1, 175 mm) to Post (D, 250 mm) using one Screw (P4, M8 x 50 mm) and one Washer (W3).
- Attach Post (E, 320 mm) to Platform/Bed (P1, 175 mm) using one Screw (P5, M8 x 65 mm) and one Washer (W4).
- Attach Post (F, 320 mm) to Post (E, 320 mm) using one Screw (P5, M8 x 65 mm) and one Washer (W5).
- Attach Post (G, 385 mm) to Post (F, 320 mm) using one Screw (P5, M8 x 65 mm) and one Washer (W5).
Ensure all connections are secure. The assembly tool (M1) is provided for tightening screws.