Conductix Wampfler Global | We move your business
Instruction Manual for CONDUCTIX wampfler models including: Line Feed SingleFlexLine Program 0815, Line Feed, SingleFlexLine Program 0815, SingleFlexLine, SingleFlexLine Program, Program 0815
Installation Instructions Line Feed SingleFlexLine Program 0815 MV0815-0009a-EN www.conductix.com original document page 3 of 7 4. Put a blind rivet at each side, notice a staggered arrangement.
Strömskenor | Sweden
File Info : application/pdf, 7 Pages, 1.49MB
DocumentDocumentInstallation Instructions Line Feed SingleFlexLine Program 0815 Order Number: 08-E015-0570 MV0815-0009b-EN www.conductix.com original document page 1 of 7 Installation Instructions Line Feed SingleFlexLine Program 0815 1 Technical Data For straight and bended rails r 1000 mm Imax = 54 A Cable Cross Section = 4-6 mm2 2 Installation Work steps: 1. Bend the rail to the desired radius (see BAL0800-0004). 2. Cut the insulation profile on the needed position. 3. Put the U-plate on the right position and drill a hole with Ø = 3.1 mm (one hole on each side with a staggered arrangement). Notice: The holes (1) for the blind rivets are no through holes! 1 MV0815-0009b-EN www.conductix.com original document page 2 of 7 Installation Instructions Line Feed SingleFlexLine Program 0815 4. Put a blind rivet at each side, notice a staggered arrangement. 5. Crimp the cable and cable lug. 6. Consider the required arrangement of small parts and fix it with the hexagon nut. Tighten the screw with 2 Nm. 6 5 4 3 2 1 All parts included in delivery! Pos. Description 1 Contact Plate Line Feed 0815 2 Blind Rivet Copper/Bronze Ø3x5 Flat Head 3 Cable Lug M4/6mm2 4 Detent-Edged Washer SHB-K-D4,1-A4 5 Hexagon Nut DIN934-M4-A4 6 Power Feed Cover 0815 SP MV0815-0009b-EN www.conductix.com original document page 3 of 7 Installation Instructions Line Feed SingleFlexLine Program 0815 7. After the assembly it should be like following: 8. After the cable was connected, put the feed cap over the feeding point and consider the direction for the cable. MV0815-0009b-EN www.conductix.com original document page 4 of 7 Installation Instructions Line Feed SingleFlexLine Program 0815 9. Installation position (feed offset): Mount the power feeds with an offset MV0815-0009b-EN www.conductix.com original document page 5 of 7 Installation Instructions Line Feed SingleFlexLine Program 0815 10. Do not mount the power feeds directly next to the hanger clamp. min. 100 min. 100 MV0815-0009b-EN www.conductix.com original document page 6 of 7 Installation Instructions Line Feed SingleFlexLine Program 0815 Conductix-Wampfler GmbH Rheinstraße 27 + 33 79576 Weil am Rhein - Märkt Germany Importer for the United Kingdom: Conductix-Wampfler Ltd. 1, Michigan Avenue Salford M50 2GY United Kingdom Phone: +49 (0) 7621 662-0 Fax: +49 (0) 7621 662-144 info.de@conductix.com www.conductix.com Phone: +44 161 8480161 Fax: +44 161 8737017 info.uk@conductix.com www.conductix.com MV0815-0009b-EN www.conductix.com original document page 7 of 7