CONCEPTRONIC
AMDIS09B
Quick Installation Guide
Installation
Follow these steps to install your webcam.
Specification
| Interface | USB 2.0 |
|---|---|
| Resolution | 1920*1080@30fps |
| Focus type | Fixed focus |
| Angle of view | 80° |
| Output image format | MJPEG/YUV |
| Working current | 150mA~300mA |
| Operating temperature | -10°C ~ 45°C |
| Dimensions (W x D x H) | 100 x 54 x 50 mm |
| Cable length | 2m |
| Weight | 120g |
| Package contents | Webcam, Privacy cover, Quick Installation Guide |
System Requirements
- Windows 10/11
- macOS, ChromeOS, Linux, Android
- PC or laptop with an available USB-A port
Installation and Usage
-
Mount the Webcam
Open the clip and place the webcam securely on top of your desktop or laptop monitor, or mount it on a tripod using the built-in tripod screw hole.
-
Connect to Computer
Plug the webcam into an available USB port (USB 2.0 recommended). The system should automatically detect and install the necessary driver.
-
Set Up Windows Hello Face Recognition
-
a. Create a Windows Hello PIN
- Go to Settings > Accounts > Sign-in options.
- Set an account password if not already done.
- Click "Add" under Windows Hello PIN and follow the instructions.
-
b. Set Up Face Recognition
- Click "Set up" under Windows Hello Face and follow the on-screen instructions.
- After scanning your face, click "Close" to finish or "Improve recognition" for additional scans (recommended if you wear glasses or change your appearance frequently).
-
When the lock screen appears, simply face the webcam. The system will automatically unlock once your face is recognized.
Note:
- Remove the protective film before use.
- Avoid touching the lens; use a lens blower to remove dust.
- Video call quality may vary depending on the chat software used.
- Performance may be affected by your internet connection and system hardware.
- The webcam may not be recognized if the computer enters sleep, standby, or hibernation mode. Disable these settings for uninterrupted use.
Safety and Warning Instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, Conceptronic assumes no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
- Keep the device away from water, humidity, fire or hot environments.
- Keep your device and all its parts and accessories out of the reach of small children.
- Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
- Avoid dropping, throwing or crushing the device.
- Do not open, change or damage the device.
- Disconnect the product from the mains before cleaning.
- Clean the product with a dry, fibre-free cloth.
Disposal of Waste Electrical Equipment
♻️ Dispose of the product at a recycling point. Do not dispose of together with household waste. Incorrect storage/disposal can harm the environment and/or cause injury.
Compliance Marking
[CE / UKCA marking] Conceptronic declares that this product complies with the directives listed in the section 'Declaration of Conformity'.
Models: AMDIS09B, AMDIS09B Windows Hello Face Recognition Webcam, Windows Hello Face Recognition Webcam, Hello Face Recognition Webcam, Face Recognition Webcam, Recognition Webcam