Manuals+

Joso D6/D7 Wireless Game Controller User Manual

Package Contents

  • Wireless Game Controller *1
  • USB Type-C Charging Cable *1
  • User Manual *1

Hardware Requirements / Compatibility

  • iOS 13.4.0 or above / iPhone
  • Android 6.0 or above / Cell Phone
  • Windows 7.0 or above / PC with Bluetooth

Device Layout

The controller features the following layout:

  • Left Stick
  • L3 (Left Stick pressed vertically down)
  • D-Pad
  • [N.S Button]
  • [Bluetooth Button]
  • [V3 Button]
  • [LT]
  • [LB]
  • [RESET]
  • [Type-C Charging Port]
  • [Right Stick]
  • R3 (Right Stick pressed vertically down)
  • [A/B/X/Y Button]
  • [SELECT Button]
  • [TURBO Button]
  • [START Button]
  • Indicator Light

Connection

This wireless game controller uses Bluetooth 5.0 EDR/BLE technology. Choose the right connection mode for your device before pairing.

Before Pairing:

  • Please fully charge the controller before first use.
  • Ensure that the controller is turned off before Bluetooth pairing connection.

iOS Connection

iOS Mode 1:

  1. Press the [Bluetooth Button] for 5 seconds to turn on the controller (Red indicator light will blink).
  2. On your iPhone, go to Bluetooth settings, find and connect "Xbox Wireless Controller".
  3. When the red indicator light stays solid, the connection is successful.

In this mode, controller-supported games from the App Store, Xbox Cloud Gaming, and Steam Link are operational.

Tip: If the red indicator light keeps blinking, turn off Bluetooth on your device, then hold the [Bluetooth Button] until the light turns off (to power down the controller). Try connecting again using the steps above.

iOS Mode 2:

  1. Press and hold the [R3 Button], then press the [00 Button] for 5 seconds to turn on the controller (Purple indicator light will blink).
  2. On your iPhone, go to Bluetooth settings, connect "DUALSHOCK 4 Wireless Controller".
  3. When the purple indicator light stays solid, the connection is successful.

*PS Remote Play operates in this mode if your network, device settings (Remote Play enabled, PS5 in Rest Mode), and environment meet requirements (stable connection, proper NAT, updated software).

Android Connection

Android Mode 1:

  1. Press the [Bluetooth Button] for 5 seconds to turn on the controller (Red indicator light will blink).
  2. On your Android, go to Bluetooth settings, find and connect "Xbox Wireless Controller".
  3. When the red indicator light stays solid, the connection is successful.

Tip: If the red indicator light keeps blinking, turn off Bluetooth on your device, then hold the [Bluetooth Button] until the light turns off (to power down the controller). Try connecting again using the steps above.

Controller-enabled Play Store titles (e.g., Call of Duty: Mobile), Xbox Cloud Gaming, and Steam Link function in this mode.

If the controller is connected but Call of Duty Mobile isn't working:

  • Go back to the game's Home Page and close it.
  • On your phone or tablet, forget the Bluetooth device "Xbox Wireless Controller".
  • Reconnect the controller using the steps above.
  • Relaunch Call of Duty Mobile.

If certain Play Store games with controller support malfunction or have limited button response in this mode, switch to the following Bluetooth connection method instead.

Android Mode 2:

  1. Press the [00 Button] for 5 seconds to turn on the controller (Green indicator light will blink).
  2. On your Android, go to Bluetooth settings, find and connect "Pro Controller".
  3. When the green indicator light stays solid, the connection is successful.

Tip: If the green indicator light keeps blinking, turn off Bluetooth on your device, then hold the [00 Button] until the light turns off (to power down the controller). Try connecting again using the steps above.

Android V3 Mode (for PUBG Mobile with Shooting Plus V3 APP):

  1. Download 'ShootingPlus' and 'PUBG Mobile' from your Android Device's Play Store.
  2. Connect the Game Controller:
    1. Press the [V3 Button] for 5 seconds to turn on the controller (Blue indicator light will blink).
    2. On your Android, go to Bluetooth settings, find and connect "D6".
    3. When the blue indicator light stays solid, the connection is successful.

    Tip: If the blue indicator light keeps blinking, turn off Bluetooth on your device, then hold the [V3 Button] until the light turns off (to power down the controller). Try connecting again using the steps above.

    * For the first time use the APP, you need to permit ShootingPlus APP 'Floating Window' function.

  3. Access PUBG Mobile via the ShootingPlus APP:
    1. In the gaming interface, tap the V3 APP icon in the lower left-hand corner; the default keys will be displayed on the screen.
    2. Drag the default key to the correct key function location. You can also add keys with non-default settings, then drag the unwanted key to the [Trash Icon].
    3. After confirming your key layout, tap 'SaveAs' and enter a name to store this setting for next time.

    IMPORTANT: The [R Button] (reflection key of the right rocker) needs to be placed on the middle of the right side of the screen to enable the function to rotate the character 360°.

  4. Setting Left/Right Joystick Radius:
    1. Tap the [L Button] or [R Button] icon.
    2. Adjust 'View stick' & 'Ordinary stick' and test them to meet your best settings.
    3. After setup, tap 'Sure' -> 'SaveAS' -> 'Finish'.

Android Mode 4:

  1. Press and hold the [R3 Button], then press the [00 Button] for 5 seconds to turn on the controller (Purple indicator light will blink).
  2. On your Android, go to Bluetooth settings, connect "Wireless Controller".
  3. When the purple indicator light stays solid, the connection is successful.

*PS Remote Play operates in this mode if your network, device settings (Remote Play enabled, PS5 in Rest Mode), and environment meet requirements (stable connection, proper NAT, updated software).

Nintendo Switch (1st Gen & OLED) Connection

  1. From the HOME menu of the console, select Controllers, then Change Grip/Order.
  2. Press the [00 Button] for 5 seconds to turn on the controller.

Once paired, the green light will stay solid, and the controller will be shown on the screen.

Two players are also supported. Press [L Button] + [R Button] on the controller.

Press [A Button] when you're ready.

PC Connection

PC X-input Mode | Wireless:

  1. Connect Your Controller to PC
    1. Press the [Bluetooth Button] for 5 seconds to turn on the controller (Red indicator light will blink).
    2. On your PC: Go to Windows Settings → Devices → Bluetooth & other devices → Add device. Select "Xbox Wireless Controller". Once paired, the light will stay solid.
  2. Steam Client Configuration
    1. Open Steam → Settings → Controller → General Controller Settings.
    2. Enable:
      • "Xbox Configuration Support"
      • "Generic Gamepad Configuration Support" (for some games).

*Right-click game in Steam → Properties → Controller: Select "Force Steam Input" (if game doesn't detect controller).

*Restart Steam/Game: If controls don't work.

Button Combinations

Turbo:

  • Assign Turbo: Press and hold the [TURBO Button], then press your desired action button (configurable buttons: A/B/X/Y/LB/RB/LT/RT).
  • Auto-Release Turbo: Repeat the above step once more to enable automatic Turbo release.
  • Clear Turbo: Perform the same sequence a third time to remove the Turbo assignment.

Vibration Adjustment:

Hold the [TURBO Button] + Right Stick Up/Down to increase/decrease vibration intensity.

*Platform Support: PC | Nintendo Switch

*Unsupported Platforms: iOS | Android

Axis Calibration:

With controller powered off: Place controller flat on a surface, simultaneously press:

[SELECT Button] + [Bluetooth Button] OR [SELECT Button] + [00 Button] OR [SELECT Button] + [V3 Button]

The LED will flash 3 colors (red → blue → green) then turn off, indicating successful calibration.

D6 & D7 Power Status

  • Low battery: Indicator light flashes rapidly.
  • Charging: Indicator light blinks slowly.
  • Fully charged: Indicator light stays on.

D7 Keys Light Control Shortcut

OFF: [L3 Button] (hold) + [TURBO Button]

ON: Same combo again

Troubleshooting

Bluetooth pairing taking too long?

  • First, forget the controller in your device's Bluetooth settings (required).
  • Long-press (5 seconds) any function button ([Bluetooth Button], [00 Button], or [V3 Button]) to power off.
  • Restart the controller to reconnect.

Controller not working after successful pairing?

  • First, remove old controller connections from your phone.
  • Restart your device.
  • Reconnect the controller.

Can't find Bluetooth when turning on controller?

  • Check if it's connected to another device.
  • Disconnect from other devices and try again.

Controller won't turn on after charging?

  • Press the Reset button to reboot (LEDs will turn off).
  • Reconnect using proper pairing mode.
Models: D6, D7, D6 D7 Wireless Game Controller, D6 D7, Wireless Game Controller, Game Controller, Controller

File Info : application/pdf, 10 Pages, 3.47MB

B1l4N7d46LL Adobe PDF library 16.07 Adobe Illustrator(R) 24.0

Related Documents

Preview Joso D3 Wireless Game Controller User Manual
Comprehensive user manual for the Joso D3 Wireless Game Controller, covering setup, connection modes for iOS and Android, macro recording, power status, and troubleshooting.
Preview Joso D6 Controller Troubleshooting and PS Remote Play Guide
A comprehensive guide to troubleshooting common issues with the Joso D6 mobile game controller, including setup, button functionality, and using PS Remote Play. Learn how to upgrade firmware and connect your controller for seamless gaming.