Company Imprint & Legal Information | Hytronik
iot.koolmesh.com
Instruction Manual for HYTRONIK models including: HBTD8200P, HBTD8200P Bluetooth Controller with 4 SELV Push Switch Input, Bluetooth Controller with 4 SELV Push Switch Input, Controller with 4 SELV Push Switch Input, 4 SELV Push Switch Input, Push Switch Input, Switch Input
Dimming Interface Operation Notes ... Regarding precautions for Bluetooth product installation and operation, please kindly refer ... App User Manual V2.1.
1 giorno fa — App User Manual V2.1. - Able to connect the Fire Alarm system. - Once the fire alarm system is triggered, all the luminaries.
Switch-Dim. The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches.
File Info : application/pdf, 1 Pages, 863.25KB
DocumentDocumentInstallation and Instruction Manual
Bluetooth controller with 4 SELV Push Switch Input
HBTD8200P
1. Technical Specifications
Product type Mains voltage Stand-by power Operation frequency Transmission power Range (Typical) Protocol Operation temperature Case temperature (Max.) Storage temperature Max. relative humidity IP rating Impulse withstand voltage Duty type Insulation material Glow wire Protection Type of switch Insulation EMC standard (EMC) Safety standard (LVD) RED ROHS
Switch (Flush mount) 220~240VAC 50/60Hz <0.5W 2.4 GHz - 2.483 GHz 4 dBm 10 ~ 30m
5.0 SIG Mesh Ta: -20°C ~ +50°C Tc: +75°C -40°C ~ +70°C 10 ~ 90% IP20 2.5KV S1 PTI material group IIIa level 3, 850°C Built-in protection provide Single load(single-ploe disconnection) Class II EN55015, EN61547, EN61000-3-2, EN61000-3-3 EN 61347-1,EN 61347-2-11, EN62493 EN300328 EN301489-1 EN301489-17 EN50663 ROHS compliance
2. Download the App
Free App for set-up and commissioning
5.0 SIG mesh
3. Installation
Warnings: 1. Installation must be carried out by a qualified engineer in accordance with local regulations. 2. Disconnect power supply before installing. 3. Ensure environmental conditions are suitable for electronic equipment
HBTD8200P
P4 P3 P2
P1 COM
46
46
18
iOS
Android
for iOS
for Android
Smartphone app for both iOS & Android platform
Wiring Diagram
for iPad Koolmesh Pro app for iPad
HBTD8200P
P4 P3 P2 P1COM
Bluetooth
Wire Preparation
Rising clamp terminal.
0.75 - 4mm 8mm
To make or release the wire from the terminal, use a screwdriver to push down the button.
1. 200 metres (total) max. for 1mm² CSA (Ta = 50¥) 2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50¥)
4. Dimming Interface Operation Notes
Switch-Dim The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.
Switch Function Push switch Sensor-link (VFC signal only) Emergency Self-Test Function Fire Alarm (VFC signal only)
Action Short press (<1 second)
* Short press has to be longer than 0.1s, or it will be invalid.
Double push
Long press (1 second)
/ Short press (<1 second)
* Short press has to be longer than 0.1s, or it will be invalid.
Long press (1 second)
Descriptions
- Turn on/off - Turn on only - Turn off only
- Recall a scene - Quit manual mode - Do nothing
- Turn on only - Turn off only - Recall a scene
- Quit manual mode - Do nothing
- Dimming - Colour tuning - Do nothing
- Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor
- Start Self test (Monthly) - Stop Self test
- Start Self test (Annually) - Invalid
- Start Self test (Monthly) - Stop Self test
- Start Self test (Annually) - Invalid
Refer to
App User Manual V2.1
- Able to connect the Fire Alarm system - Once the fire alarm system is triggered, all the luminaries controlled by the Push Switch will enter the preset scene (normally it's full on), after the fire alarm system gives the ending signal, all the luminaries controlled by this Push Switch will revert back to normal status.
5. Additional Information / Documents
1.To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions 2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products - Precautions for Product Installation and Operation 3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensor ->Receiver Nodes 4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Web
for Web Web app/platform: www.iot.koolmesh.com
"PTM" ("push to make") HBTD8200P-20230216-A0
HBTD8200P-20230216-A0