Quick Start Guide

Unpacking

This section details the unboxing of the Charging Stand with MagSafe. The product is presented alongside the Quick Start Guide itself.

Brand visible: OTTERBOX

Components

The charging stand features the following key components:

• 1. Input USB-C Port: Located at the base of the stand for power connection.
• 2. Wireless Apple Watch Charger: The magnetic charging puck designed to hold and charge an Apple Watch.

Diagram Description: A line drawing of the charging stand shows the base with the USB-C port labeled '1' on the side, and the Apple Watch charging puck at the top labeled '2'.

Charging Your Device

To charge your compatible device, place it onto the wireless charging puck. The phone screen indicates "90% Charged".

Diagram Description: A smartphone is shown magnetically attached to the charging stand's puck and is actively charging. A USB-C cable connects the stand to a power adapter.

Specifications

Manufacturer: DONGGUAN KETAIHONG ELECTRONICS CO.,LTD

Address: Second Industrial Zone, Shujiu Village, Changping Town, 523569 Dongguan, Guangdong, PEOPLE'S REPUBLIC OF CHINA

For more information, please visit: https://www.otterbox.com

Attention / Atención

Please observe the following safety precautions:

• Do not expose products to excessive heat (e.g., from storage in direct sunlight, fire, or the like). ☀️? [heat warning]
• Do not try to take the product apart. It may cause serious damage. ?️❌ [do not disassemble]
• Do not drop or knock the product on hard surfaces. ?❌ [do not drop]
• Do not use chemicals or detergents to clean the product. ?❌ [do not use chemicals]
• Use the original cable or certified cables. ?✔️ [use certified cables]

WARNING: Do not hang any type of accessory or accessory bracket from the plug.

(Note: The original document includes French translations for some warnings, but for conciseness and primary language focus, only English is retained here, with the original French heading kept for context.)

Warranty & Compliance

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement (Canada)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator & your body.

(Original French text for ISED statement is omitted for primary language focus.)

Compatibility

This charging stand is made for the following Apple iPhone models:

• iPhone 13 Pro Max
• iPhone 13 Pro
• iPhone 13 mini
• iPhone 13
• iPhone 12 Pro Max
• iPhone 12 Pro
• iPhone 12 mini
• iPhone 12