Eliot Round Table Assembly Guide

Tools

• Included black hex wrench (5mm)
• Included silver hex wrench (6mm)

Parts

• Ø280 mm Round Table Top
• Tube
• Socket Screw
• Clamp

Assembly

1. Step 1: Connect Top and Tube

   Remove protective cap. Connect the round table top to the tube and tighten.

   Diagram: Table top connected to tube with screw.

2. Step 2: Secure Top

   Use the black hex wrench to turn the socket screw clockwise until tight. This secures the table.

   Diagram: Black wrench tightening screw.

3. Step 3: Insert Tube into Clamp

   Carefully insert the tube into the clamp's top hole.

   Diagram: Tube inserted into clamp.

4. Step 4: Attach Clamp

   Ensure the clamp's finger screw is open. Use the silver hex wrench to turn the socket screw clockwise until tight.

   Diagram: Clamp positioned, finger screw open, silver wrench tightening screw.

5. Step 5: Position Table

   Place the round table at the desired position on the table surface.

   Diagram: Round table placed on desk surface via clamp.

6. Step 6: Fix Table

   When placement is correct, tighten the clamp's finger screw completely.

   Diagram: Finger screw tightened to secure table.

Safety

⚠️ Safety:

• Keep desk height adjustment area clear of obstacles.
• Ensure the table top has at least 25 mm clearance from walls or objects on all sides.

Read and follow all instructions. Keep them near your height-adjustable desk.