ZERODRAG Catalyst Racewire User Manual

Product Description

The ZERODRAG Catalyst Racewire is a specialized motor wire. It is a convenient bridge between the motor and the ESC (Electronic Speed Controller), which helps extend the existing length of wire on the motor, keeps the propellers from cutting motor wires, and also makes it easier to swap motors on the field.

Specifications

• Dimension: 40mm x 9mm
• Weight: 1.47g

In The Box

• 5 x ZERODRAG Catalyst Racewire
• 5 x Heatsink

Wiring and Connection

The Catalyst Racewire is to be placed between the motor and ESC (Electronic Speed Controller).

Diagram illustrating the connection of a drone motor to an ESC using the ZERODRAG Catalyst Racewire. It shows a motor on the left, the Racewire in the middle, and an ESC on the right, with lines indicating wire connections to pads on the ESC.

• Mount the motor on the drone arm and place the Catalyst Racewire on the arm of the drone.
• Cut the motor wires to length and connect the three wires to the three pads.
• On the other side, connect the Catalyst Racewire to the ESC (Electronic Speed Controller) via the same gauge of wire.
• Make sure to wrap the entire Catalyst Racewire and its connections with the included heatsink.

Note: CARBON FIBRE IS CONDUCTIVE. PLEASE ENSURE THAT NONE OF THE SOLDER PADS OR EXPOSED WIRES ARE TOUCHING THE CARBON FIBRE FRAME. PLEASE USE INCLUDED HEATSINK TO INSULATE ALL CONNECTIONS FROM THE FRAME.

Contact

• Website: https://zerodrag.in/
• Instagram: https://www.instagram.com/zerodrag.in/
• LinkedIn: https://www.linkedin.com/company/zerodrag/
• WhatsApp: https://wa.me/9821734544