Smonet Smart Lock Manual

Preface

Please read this manual before installing. Any question, please contact customer service.

⚠️ WARNING:

This Manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional.

US Toll Free: 1-(888)-988-1231

What's APP: 1-(888)-988-1231

E-mail: smonetservices@hotmail.com

Introduction

Product Specifications

Diagram: Shows a keypad with numbers 0-9, *, #, and a circular knob. Next to it is the main lock body with a circular knob and a slot. A third image shows the internal mechanism.

Package

Diagram: An exploded view of the smart lock components, labeled A through Q. A table lists the parts and their quantities.

Performance

1. Smarter and Safer

   The Smart Lock Front Door is designed to provide extra home security with keyless codes, Bluetooth unlock, anti-peep password, and auto lock (5-200s) to keep your house safe and sound.

2. Real Time Record

   Through the Keyless Door Locks for Homes APP, you can check unlocking records and incorrect password records from the Admin account in real time, providing comfort in knowing your door's status.

3. Fast Sharing and Convenient

   With Smart Digital Door Locks for Homes, you can share codes with friends and guests that are valid for a few weeks, hours, or minutes, and revoke them whenever needed. This eliminates the worry of lost, stolen, or copied keys.

4. Easily Install and Smart Reminder

   Installation requires just a screwdriver and easy-to-follow instructions. When the battery is low, the Keypad Door Lock Deadbolt Set will alarm and can be temporarily powered by a 9V battery.

Installation Manual

Note: Install and test the lock with the door open to avoid being locked out.

Tools Needed

Phillips Screwdriver, Tape Measure, Pencil, Other Chiseling Tools.

1. Adjusting Latch Length

Diagram: Shows three stages of adjusting the latch length, indicating rotation and extension.

Note: When performing this operation, please take protective measures and be careful of the metal edge to avoid injury.

2. Check Door Dimensions

Diagram: Illustrates door dimensions including backset determination (distance from door edge to center of hole), hole diameters (recommended drill sizes), and suitable door thickness range. It also shows the keypad and lock body.

1. Backset Determination: Backset is the distance from the door edge to the center of the hole on the door face.

2. Hole's Diameters: Using the marks as a guide to drill holes: Φ3/8" (10mm) for fastening the smart door lock, Φ2-1/8" (54mm).

3. Door Thickness: The door thickness within 1-1/2" to 1-7/8" (38mm-48mm) is suitable for the keypad deadbolt handle set.

3. Install Lock

1) Install Latch

Note: Ensure the latch is inserted with the correct orientation (UP arrow indicated).

Diagram: Shows the latch and its orientation. Followed by three steps (a, b, c) illustrating marking the faceplate outline, chiseling the door edge, and inserting the latch with wood screws.

A. Mark the outline of the faceplate, then take out the latch.

B. Chisel 1mm-2mm deep along the outline to allow the faceplate to be aligned with the door edge.

C. Insert the latch into the door; use 2 wood screws to secure the latch.

2) Install Plate

Diagram: Shows three steps (a, b, c) for installing the strike plate. This involves closing the door to mark the bolt position, marking the plate outline on the jamb, and drilling the hole.

A. Identify the center of the plate: Close the door to lay the latch bolt against the door frame. Mark the outline of the plate onto the door jamb.

B. Drill 25mm deep at the intersection of the horizontal and vertical lines of the plate.

C. Chisel 1mm-2mm deep along the plate outline to allow the plate to be aligned with the door frame.

D. Insert the plastic lock groove and the strike plate into the door jamb and tighten with wood screws.

3) Install Keypad

Diagram: Shows installing the double-screw bolt into the keypad inner plate. Then, shows placing the IC wire, latch link bar, and double-screws through the deadbolt holes.

Diagram: Shows the IC wire and screws connection to the mounting plate.

Note: IC wire should be placed under the latch.

After installing the front pad, roll the handle spindle to test if it works with the deadbolt. If not, remove the front pad, roll the latch link bar around 90 degrees, and try installing again until it works with the deadbolt.

Pass the IC wire and the latch link bar to the mounting plate. Use 1 flat screw to secure the keypad double-screw bolt. Use 2 flat screws to connect the mounting plate with the latch.

Note: Place the IC line as shown in the figure to avoid the lock latch going out of control.

4) Identify Door Handing

Diagram: Shows a door with hinges on the left labeled "Left-handle", and a door with hinges on the right labeled "Right-handle".

The door is "Left-handle" if the hinges are on the left side of the door.

The door is "Right-handle" if the hinges are on the right side of the door.

5) Adjust Thumb Turn Piece

Diagram: Shows the interior side of the lock. For a Left-handle door, the thumb turn piece should be in a "Horizontal Direction" when unlocked. For a Right-handle door, it should be in a "Vertical Direction" when unlocked.

Rotate the thumb turn piece to "Horizontal Direction" for Left-handle doors (open into room) when in unlock status.

Rotate the thumb turn piece to "Vertical Direction" for Right-handle doors (open into room) when in unlock status.

6) Adjust the Toggle Button of the Cover

Diagram: Shows the back cover assembly with a toggle button labeled "L" and "R".

To install the lock for left-side handling, ensure the toggle button on the back cover assembly is set to "L".

To install the lock for right-side handling, ensure the toggle button on the back cover assembly is set to "R".

7) Install Receiver Module

Diagram: Shows how to remove the battery cover by pressing a spring button with a sharp object and pushing the cover up.

Diagram: Shows connecting the IC wire to the white port carefully. It also shows using screws to attach the receiver module to the door.

Note: Ensure the thumb turn piece and the toggle button of the cover are in the correct orientation.

Use 2 short flat screws to tighten the receiver module inner battery groove. Use the longest flat screw to connect the receiver module with the door.

8) Insert Battery and Install Back Battery Cover

Diagram: Shows the back of the lock where batteries are inserted and the cover is attached.

Insert 4 pcs (AA) 1.5V Alkaline batteries and slide the battery cover back onto the receiver module.

Remarks

(1) Alkaline batteries are recommended to stabilize the power supply. If non-alkaline batteries are used, battery performance will be greatly reduced.

(2) All settings will be retained in memory even if the batteries are completely dead. If batteries are dead, use a 9V backup battery to unlock the door.

Smart Instruction

Pairing Lock to Phone App

1. Download the App "TTLock"

For Android Mobile Phones: Search "TTLock" from Google Play.

For Apple Mobile Phones: Search "TTLock" from the App Store.

Diagram: Shows QR codes for Android and Apple app downloads.

2. Register and Login the Account

Diagram: Screenshots of the TTLock app showing the Login and Register screens, including options for phone or email registration, country/region selection, and password setup.

3. Match the Lock to the Application

When matching, follow the program's prompt steps. After installing the lock and battery, touch the screen, match the blue icon lock, and set the name for the lock.

Note: If the smart lock is in a non-addable state, remove batteries to power off the lock for about 5 seconds. Then, power on and long press the manual button for about 10 seconds. Once you hear a beep-beep sound, the lock is reset successfully.

TT LOCK App Operating

1. Account Information Change

When logging into the "TTLock" App, you need to set up an account with a password. Each account can be added with multiple smart device locks for management. Once the smart lock is added, it becomes the admin account for the lock.

Diagram: Screenshots of the TTLock app interface showing account management, adding locks, and password reset options.

2. Lock/Unlock

Press to unlock, long press to lock. It requires your smartphone and Bluetooth lock to be within a certain range.

Note: If you want remote control, you need to connect to the Gateway.

Diagram: Screenshot of the TTLock app showing the lock/unlock interface.

3. Send eKey

You can add another account on the app. This allows family members to control the Bluetooth lock via the app. It supports authorized users with Limit time, Permanent, One-time, and Recurring control for the smart lock.

Diagram: Screenshots of the TTLock app interface for sending eKeys, specifying recipient, name, and time validity.

4. Generate Passcode

Generate or customize the passcode for the Bluetooth lock. You can generate or customize permanent, one-time, time-limited, or recurring passcodes.

Diagram: Screenshots of the TTLock app interface for generating passcodes, with options for permanent, timed, one-time, and custom settings.

Note: Generate the passcode to clear the passcode stored by the Bluetooth lock using "Erase". Once used, all passcodes except the admin passcode will be cleared.

5. eKeys

Manage authorized accounts in "Send eKey". The admin can clear eKeys, reset eKeys, send eKeys, etc.

Diagram: Screenshots of the TTLock app showing the eKeys management section.

6. Passcodes

This section records all passwords stored by the Bluetooth lock. It also allows you to reset, generate, and upload passwords.

Diagram: Screenshots of the TTLock app showing the Passcodes section.

7. Records

It records the time and manner of the smart lock when someone opens or closes the door. Manage your Bluetooth lock safely and efficiently.

Diagram: Screenshots of the TTLock app showing the Records section with unlock attempts and timestamps.

8. Settings

This section provides functions for Bluetooth lock settings, lock information, remote unlocking, auto-off time, lock sound, time proofreading, record reading, etc.

Diagram: Screenshots of the TTLock app Settings menu, including options like Auto Lock, Lock Sound, and Unlock Notification. It also shows the Auto Lock configuration screen.

You can find information about the lock, such as battery power and admin passcode.

Note: The admin passcode will not be cleared when erasing passcodes.

If you forget to lock your door often, you can set "Auto Lock". Set the time for automatic locking according to your needs, so you don't have to worry about security accidents due to being unlocked.

Connectivity

9. Remote Control

Remote control requires an additional Wi-Fi Gateway. Match the gateway, smartphone, and app, then the smart lock can support remote control.

Diagram: Image of a Wi-Fi Gateway.

MATCH the Wi-Fi GATEWAY to the APPLICATION

Remote Control and Alexa support will be available after matching the Wi-Fi Gateway.

Click the button in the upper left corner of the page and enter relevant information as prompted to add a gateway to your account.

Note: When the smartphone app matches the smart lock or the gateway, it is necessary to enable Bluetooth and Wi-Fi. It can be successfully matched when your smartphone is close to the lock and the Gateway.

Diagram: Screenshots of the TTLock app showing the process of adding a gateway, including selecting gateway type (G1, G2).

MATCH the TTLOCK APP to the ALEXA APP

After setting up the gateway, authorize the TTLock app in the Alexa app and log in to the TTLock account to enable remote unlock and voice remote unlock.

Select "Skill & Games", input "TTLock" in the search bar, click “ENABLE TO USE". Then, input your TTLock account and password to finish the authorization.

Note: If it shows "Invalid Account and Password", please add "+1" at the front of the account.

Diagram: Screenshots showing the Alexa app interface for searching and enabling the TTLock skill, linking accounts, and controlling the lock via voice commands.

Press the "Locks" option, choose the lock you paired. Click the icon in the upper right corner and slide the icon button of "unlock by app" and "unlock by voice".

MATCH the SMART WATCH to the SMART LOCK

Support for Smart Watch (Apple watch or Android watch) lock/unlock is available. It is supported that the smart watch matches the smartphone.

If the watch is connected to the phone but cannot search the "TTLock" App, try logging into the home page of your phone app to refresh, and then check in the watch.

If all settings are normal but the lock/unlock function fails, open the "TTLock" App on your phone to check if the key is in a normal state.

Diagram: Image of an Apple watch and an Android watch.

Note: For all operations, your watch and mobile phone require a certain range. The mobile phone network and Bluetooth need to remain in a normal state.

Operation Instructions

Keep the door opened while programming to avoid being locked out accidentally.

Diagram: Shows the keypad and lock body with labels for Touch screen button, Metal Keyhole Cover, 9V Backup Power Interface, Battery Cover, Thumb Turn Piece, and Deadbolt Button.

Setting Admin Passcode

The admin passcode can be generated/set up after matching the "TTLock" app. When not added to the phone, enter "*12# [Custom Admin Passcode] # [Confirm Passcode] #" on the keypad.

Diagram: Shows the keypad interface for entering the passcode.

Lock/Unlock

Via Key: The package contains two keys that can be used directly through the keyhole.

Via Keypad: Enter the passcode then press "#" to unlock. Long press "#" and hold for 2 seconds to lock.

Via APP: Touch to unlock, long press to lock. It supports this function at a certain distance between the smartphone and the lock.

Note: Remote control support requires matching with a Wi-Fi Gateway.

Rotate the turn piece to unlock/lock from inside.

The first time you long press the deadbolt, it will make a clear sound "DiDi". All passcodes, even app control, will not be able to unlock from the outside, except the admin passcode.

When you long press it again until another sound "Di" is heard, all functions return to normal, and the smart lock is working.

Diagram: Shows the interior side of the lock with Thumb Turn Piece and Deadbolt Button labeled.

Battery Power Runs Out

The smart lock sounds an alarm when the battery is low. If needed, use a 9V backup battery at the interface to unlock.

Diagram: Shows the keypad and lock body with the 9V backup power interface highlighted.

Anti-theft Alarm Prompt

The smart lock has an anti-theft alarm function.

Turn off the anti-theft alarm: Enter "*32# [admin password] #0#" on the keypad.

Turn on the anti-theft alarm: Enter "*32# [admin password] #1#" on the keypad.

Note: Keep the alarm button on the front panel always pressed during installation, otherwise it will always be beeping while installing the battery.

Diagram: Shows the back of the lock with the Reset Button labeled.

Reset Button

If the smart lock is in a non-addable state (the name is gray on the APP or cannot be found), please press and hold the reset button and try to connect again.

Note: This button is on the front Keypad panel. Please power on the smart lock when resetting.

Take out batteries to power off the lock for about 5 seconds. Then, power on and long press the manual button for about 10 seconds. Once you hear a beep-beep sound, the lock is reset successfully.