GYROOR USER MANUAL

Folding Electric Bike C2 Pro

Scan GYROOR Twitter QR Code to Get More Informations.

The manufacturer reserves the right to make changes to the product and update this manual at any time. Visit www.gyroor.com to download the latest user manual.

1. What is in the box

The foldable electric bike (electric scooter) leaves the factory with the following components. Please check after opening the box. If there are any missing, please contact us directly. Our after-sales support email is: help@gyroor.com

Number	Name	Quantity
1	Vehicle	1 pc
2	Charger	1 pc
3	User Manual	1 pc
4	Pedal lever*2	1 pair
5	4mm Hexagonal Spoon	1 pc

The use of unauthorized parts and incorrect assembly can result in damage. For the sake of personal safety and vehicle quality, the vehicle must be properly unfolded and folded in accordance with the instructions, using components supplied by the original manufacturer. Please do not try to ride on an electric bike (electric scooter) that is not properly and effectively installed. Do not disassemble or refit the electric bike (electric scooter) without permission, otherwise it may cause irreversible damage to the vehicle and may cause personal injury.

2. How to assemble

Video steps available at: https://bit.ly/3jL9zTL

Illustration showing the steps to assemble the electric bike. This includes unfolding the head tube, securing quick releases, and installing the saddle.

Spread head tube: Pull the head tube upwards until it locks into place.
Close the quick release: Secure the quick release lever for the head tube.
Rear wheel quick release: Pull up the red sliding cap (?) of the rear wheel quick release and rotate the quick release downward [to unlock].
Front wheel quick release: Unfold the front wheel quick release.
Loosen nut: Loosen the nut (?) counterclockwise into position.
Balance front wheel: Hold the head tube and adjust the front wheel to its balance point. Then rotate the front wheel quick release up [to lock].
Straighten front wheel: Turn the front wheels to the left and keep the front wheels straight.
Secure front wheel: Rotate the front wheel quick release downward to hold the front wheel.
Tighten nut: Tighten the nut (?) clockwise into position and close the lid to hold the front wheel.
Rear wheel unfolding: Adjust the rear wheel to its balance point and pull up the red rear wheel screw pin, then turn left, then revolve and unfold the rear wheel.
Rear wheel quick release: Pull up the red sliding cap (?) of the rear wheel quick release into position and rotate the quick release downward [to lock].
Secure rear wheel: Tighten the quick release into position, then close the lid.
Install saddle: Install the saddle and tighten four screws.

3. Features and Specifications

The electric bike (electric scooter) is a compact, efficient, and economical personal walking tool. Its styling has a trendy sense of science and technology, portable folding design, extremely light structure design, and powerful lithium battery power, to provide you with a pleasant driving experience.

3.1 Product Dimension

Diagram showing the dimensions of the Gyroor C2 Pro folding electric bike. The unfolded height is 970mm, length is 1120mm, and handlebar width is 450mm. The folded height is indicated as 770mm.

3.2 Specifications

Name	Parameter values	Name	Parameter values
Height range	120-190mm	Waterproof grade	IPX4
working temperature	-10~40°C	Speed	6-19mph
Storage temperature	-20~45°C	Load	265lbs
Net weight	47LBS	Gross weight	50LBS
Battery Capacity	10AH	Rated Voltage	36V
Charging Voltage	42V DC	Input Voltage	100-240V AC
Braking distance	8m (Dry state)	Braking mode	Disc Brake + Electronic Brake
Age range	12-50 years old	Max. Slope	10°
Charger time	5.5h	Distance	20miles

3.3 Product composition

Diagram labeling the various parts of the Gyroor C2 Pro electric bike. Key components include the cushion, battery and controller, tail light, rear fender, accelerator, display screen, folding vertical pipe, front and rear wheel quick releases, foot lever, 14-inch tires, handbrake, headlight, frame, disc brake, and hub motor.

Cushion
Battery and controller
Reflective stripe
Tail light
Rear fender
Rear wheel quick release
Accelerator
Right sleeve
Display screen
Folding vertical pipe
Quick release (front wheel)
Front wheel quick release
Foot lever
14-inch tire
Handbrake
Bell
Headlight
Frame
14-inch tire
Disc brake
Hub motor
Red rear wheel screw pin

3.4 Function

Turn on/off: Press the button 3-4 seconds to turn it on/off. Automatic shutdown time: 10 minutes without operation.
Set the speed: When the power is on, single click the power switch to adjust the speed between high, medium, and low gear. Low gear: 10km/h, medium gear: 20km/h, high gear: 30km/h.
Cruise control: When it is running, keep the same speed for about 6-7 seconds to enter cruise mode. Press the speed control button or brake gently to cancel the cruise mode. When speed is over 25km/h, cruise mode cannot be set.
Front light & Tail light: When the power is on, double-click the power switch to turn on the front light and tail light. Double-click again to turn off the front light and tail light. The tail light flashes when braking.
Switch km/h & miles/h: When the power is on, three-click the power switch to change between km/h and miles/h.

4. Charging the battery

4.1 How to charge

First step: Plug the charger into the power socket then into the bike charge port.
Second step: Red light (?) indicates battery is charging.
Third step: Green light indicates charging is complete.
Last step: Don't forget to plug the dustproof cap back after charging is complete.

4.2 Cautions when charging

Please charge for more than 5 hours before first use.
Please charge once a month or 2 days after each ride to maximize battery life and avoid battery to be over-discharged.
Please only use the included charger and cable supplied by the original manufacturer to avoid battery overcharge.
Please make sure the charger cable is properly connected.
Please be sure to charge in a dry environment. Never allow the charger or cable to come into contact with water, as this may result in electric shock. Never touch with wet hands. Unplug the power cord immediately if any problems occur during charging.
Please do not let the charger or cable touch sharp or hot items.
Please do not use the charger to avoid further damage, and contact for replacement if the charger or cable is damaged.
Do not repair the battery, charger, or cable by yourself. If you have any questions, please contact us to serve you.

5. Riding

5.1 Before riding

Please make sure of the following items:

Make sure that the parts of the bike are securely assembled and undamaged.
Make sure the brakes are functioning properly.
Make sure the folding mechanism is locked.
Make sure you have enough battery power (?).
Make sure the tires are intact.
Make sure the handlebars are secure and tightened without looseness.
Please have a person assist you if it is the first time you learn to ride. This person needs to be proficient in operating an electric vehicle.

5.2 Cautions when riding

Please do not ride on a smooth, slippery road.
Always wear a safety helmet and protective gear to avoid injury (⛑️).
Please note that riding on rainy days should increase the braking distance.
Please do not use this product in bad weather such as rain, snow, or ice.
Do not exceed 18° when going up and down, and do not accelerate or decelerate on the slope.
Pay attention to obstacles and road skidding; do not ride on grass or pebbles.
The wading depth should not exceed 30mm.
It is forbidden to ride the stairs up and down.
It is forbidden to drive on the motorway.
The bike is a single-passenger tool that prohibits multiple people from riding at the same time.
Please confirm that the battery is fully charged (?) before use and the tire is inflated normally.
The bike is only used for daily travel and should not be used for extreme sports or dangerous riding methods.

6. Care and maintenance

6.1 Storage

Avoid storing the electric bike (electric scooter) in direct sunlight (even in your trunk) because the temperature of the body and battery can be as high as 50 degrees Celsius after a period of time, resulting in damage to battery function and product life.
Avoid storing the electric bike (electric scooter) in humid environments.
When the electric bike (electric scooter) is not in use, the battery will also discharge slowly and automatically. Battery power should be monitored at least every three months and charged in time to ensure that the battery has sufficient power. Avoid irreparable losses caused by long-term storage of batteries without electricity (e.g., deep discharge of batteries).
In winter, batteries may lose power faster because of low temperatures.
Unreasonable storage will lead to the degradation of lithium batteries or other hidden dangers. Please store the electric vehicle in a dry, humid place indoors. If you do not use the electric bike (electric scooter) for a long time, please fill the battery and charge it at least once a month.
If you need to store the electric bike (electric scooter) for a long time, please fully charge it.

6.2 Cleaning

Make sure that the car body shuts down before cleaning, then pull out the charging wire and close the charging port. During cleaning, be careful not to let water flow into the charging port.
Use soapy water or clean water and a soft cloth to wipe the shell of the electric vehicle, and prohibit the use of high-pressure water guns to wash the electric vehicle.
The waterproof and dust-proof grade of the electric bike (electric scooter) is IP54, meaning it is anti-splash and dust-proof. Therefore, the electric vehicle should not be immersed in water, which will lead to permanent damage to the electric vehicle.

6.3 Inflation and tire replacement

When there is insufficient air pressure in the tire or when the pressure of the two tires is different, please inflate them in time to ensure that the pressure of the two tires is the same.
The default factory tire pressure of the electric bike (electric scooter) is 2.8 Bar for the front wheel and 2.5 Bar for the rear wheel.
If the electric vehicle needs to be replaced due to tire burst or other reasons, please contact the after-sales department for repair (or repair at a bicycle repair shop) (?).

7. Safety warning

For your safety and good driving experience, we ask you to use the product strictly according to the following requirements:

Be sure to read carefully and fully understand the electric bike User Manual before use.
Do not let people who are not 14 to 50 years old use it.
Pregnant women and persons who are physically or mentally unsuitable are prohibited from using them.
It is forbidden for two or more adults to ride one bicycle at the same time. It is also forbidden to ride with children or heavy loads.
Do not refit and repair the electric bike privately or by non-manufacturer authorized personnel. If there are any problems with the product, please contact the manufacturer's after-sales department immediately.
Please use the electric vehicle after ensuring that there is no looseness, damage, malfunction, or other abnormal conditions.
Before charging, make sure the outlet is dry, trouble-free, and free of foreign matter. When charging, be sure to insert the correct socket and avoid children and pets contacting it, keeping it away from flammable items.
The batteries must be stored in an environment of -20 °C to 45°C. Do not put it in an environment where the temperature is higher than 45 degrees.
If the battery leaks (including damage, odor, smoke, or overheating) and other abnormalities occur, please immediately stop using it and avoid contacting with other objects (⚠️).
Do not attempt to open or disassemble the battery or operate or use the battery abnormally.
Full-charged electric bike (display screen shows full power): standby time is up to 180 days. Non-full-charged electric bike (display screen shows 1 grid power): standby time is up to 30 days. Please pay attention to standby time to prevent irreparable damage to the battery caused by not charging in time.
Do not wear shoes that are not suitable for driving, such as high-heeled shoes, or too-loose clothes. Wear professional protective gear when using.
It is forbidden to ride the electric bike on rainy weather and other wet roads, because when the road is wet and slippery, the grip of tires decreases, the braking distance increases, and it is easy to slip and cause accidents such as electric vehicles out of control.
It is forbidden to use the electric bike in bad weather, low visibility, and poor light. Do not use when extremely fatigued.
Do not use in stairs, elevators, or through revolving doors which are not suitable for road conditions and environments.
Do not turn at high speed, and do not brake suddenly on a smoother road. The above-mentioned behavior can easily lead to skidding and other out-of-control situations.
Please drive on non-motorized lanes, prohibit driving in inappropriate places such as motorized lanes, and strictly abide by laws and regulations such as traffic rules. When approaching or passing intersections, motor lanes, turning points, doors, and other places, please pay attention to deceleration and avoidance, but also have a sense of defense, pay attention to traffic vehicles and pedestrians, as this may cause dangerous behavior.
Do not answer the phone or do any activities or actions that may distract your attention while driving the electric bike (electric scooter), so that you can focus on monitoring the external environment at any time.

8. How to fold bike

Video steps available at: https://bit.ly/3zKpwz3

Illustration showing the steps to fold the Gyroor C2 Pro electric bike. This involves folding the kickstand, manipulating quick releases on the rear and front wheels, and folding the wheels towards the frame.

Fold the kickstand: Lower the kickstand.
Open rear wheel quick release lid: Open the lid of the rear wheel quick release mechanism.
Unlock rear wheel quick release: Pull down the red sliding cap (?) of the rear wheel quick release and rotate the quick release upward [to unlock].
Fold the rear wheel: Fold the rear wheel towards the frame.
Secure rear wheel: Adjust the rear wheel to its balance point, then turn the red rear wheel screw pin to the right so that it holds the rear wheel in the folded position.
Lock rear wheel quick release: Pull up the red sliding cap (?) of the rear wheel quick release and rotate the quick release downward [to lock].
Open front wheel quick release lid: Open the lid of the front wheel quick release mechanism.
Unlock front wheel: Unscrew the nut (?) in place counterclockwise and adjust the front wheel to its balance point, then rotate the front wheel quick release upward [to unlock].
Fold front wheel: Fold the front wheel towards the frame.
Secure front wheel: Rotate the front wheel quick release downward and close the lid to hold the front wheel in the folded position.

9. Warranty

This folding version of the electric bike has a core parts warranty for 1 year or a cumulative mileage of 2000 kilometers, whichever comes first. (The core components include the motor and frame of the electric vehicle). Other electric vehicle parts warranty should be implemented in accordance with the "Electric Vehicle Guarantees Standard".

9.1 Electric Vehicle Guarantees Standard

Category	PRODUCT	DETAILS	WARRANTY PERIOD
Frame	Frame, handlebar	Desoldering, fracture naturally	12 Months
	Front wheel	Deformation, fracture naturally, etc. due to poor manufacturing quality problems	12 Months
	Painted parts, plated parts	Paint peeling, blistering, cracking for large area	6 Months
	Seat, foot support	Deformation, fracture naturally, etc. due to poor manufacturing quality	6 Months
	Plastic, inside tire, brake wire, foot pedal	Damage easily	Not including
Component	Charger, light, switch, brake	Performance failure due to poor manufacturing and cannot be repaired	6 months
Component	Controller, main cable	Performance failure due to poor manufacturing and cannot be repaired	12 months
Motor	Motor	Damaged; demagnetization	12 months
Motor	Hall, bearing	Hall damaged; bearing with abnormal sound	6 months
Battery	DC charger; USB charger	Damage easily	Not including
Battery	Battery	The range of environment temperature of Lithium battery charging is 1 °C-34 °C, ambient temperature range -10°C-45° C. At low temperatures, lithium battery capacity will have varying degrees of decline, the specific reference level is: The capacity is 68% when -10° C. The capacity is 85% when 0° C. The capacity is 100% when 25° C.	6 months
		The warranty includes these situations: abnormal voltage, unable to charge, less than 60% of capacity detected by discharge meter, when the vehicle is not affected by external force. (Not including the battery is not protected according to the user manual, and the battery is not periodically charged during storage.)

9.2 LIMITED PRODUCT WARRANTY

The following conditions are not covered by the warranty. Customers should afford the related costs:

The accumulated mileage over 2000 kilometers;
Any damage caused by failure to use, maintain, and adjust as required by the User Manual;
Serial number is deleted or is changed;
Serial number in the warranty card is not matched the product;
Dismantled or repaired by unauthorized person;
Beyond normal use conditions, using this product deliberately to cause malfunction or damage;
Damage caused by overloading, falling, or other extreme exercises;
Other failures or damages not caused by this product's itself design, manufacturing, and quality;
Damage caused by irresistible factors;
Exceeding the expiration date;
Warranty card lost;

If any situation mentioned above happens, customers should afford the costs of repairs.

9.3 Warranty policy

Customers can seek technical support from after-sales assistance through the manufacturer, or they can directly contact the dealer at the place of purchase to assist in the after-sales service process.
Within 3 working days after receiving the customer's faulty product, the company will report to the customer with the product failure analysis, fault responsibility, maintenance cost, and estimated repair completion time.
After the customer has no objection to the cause of the fault, the fault responsibility, the repair cost, and the repair completion time, the company will begin to repair the product.

10. Contact

Messenger: Gyroorboard
E-mail Service: help@gyroor.com
Website: www.gyroor.com

Please offer your order ID when contacting Gyroor.