PAC (Pacific Accessory Corporation) designs high-quality car audio interface solutions, including radio replacement kits, steering wheel control modules, and amplifier integration interfaces.
PAC (Pacific Accessory Corporation) is a trusted name in the mobile electronics industry, providing essential integration solutions for car audio installations. As a part of Stinger Solutions (AAMP Global), PAC develops technology that allows aftermarket radios, amplifiers, and safety cameras to work seamlessly with complex factory vehicle wiring and data bus systems.
Key product lines include:
Whether you are upgrading a Jeep, Ford, GM, or Toyota, PAC offers the hardware and firmware needed to ensure a plug-and-play installation.
សៀវភៅណែនាំចុងក្រោយបង្អស់ពី manuals+ រៀបចំសម្រាប់ម៉ាកនេះ។
សំណួរទូទៅអំពីសៀវភៅដៃ ការចុះឈ្មោះ និងការគាំទ្រសម្រាប់ម៉ាកនេះ។
Most PAC interfaces can be updated using the RadioPRO PC Application or a specific updater tool. Connect the module to your computer via USB and download the latest firmware from the PAC Audio webគេហទំព័រ។
នេះ។ AmpPRO interface (e.g., AP4 series) allows you to add aftermarket amplifiers to a factory sound system while retaining the factory radio's volume, balance, and fade controls. It provides a clean, variable pre-amp ទិន្នផល។
PAC offers steering wheel control (SWC) interfaces like the SWI-CP5. Many RadioPRO replacement kits also include built-in SWC retention that is pre-programmed for specific vehicles.
ប្រសិនបើរថយន្តរបស់អ្នកមានរោងចក្រ amplifier, ensure the interface is connected to the correct amplified output port and that the factory amplifier turn-on wire (usually Blue/White) is connected. You may need to cycle the ignition to initialize the factory system.