MOES Touch Wall Single Live Wire Smart Switch User Manual

1. សេចក្តីផ្តើម

This manual provides detailed instructions for the installation, setup, operation, and troubleshooting of your MOES Touch Wall Single Live Wire Smart Switch. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Image: MOES Touch Wall Single Live Wire Smart Switch and its retail packaging.

2. ព័ត៌មានសុវត្ថិភាពសំខាន់ៗ

WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• តែងតែបិទថាមពលនៅឧបករណ៍បំបែកសៀគ្វីមុនពេលដំឡើង ឬជួសជុលកុងតាក់។
• This switch is designed for single pole circuits only. It is not compatible with 3-way switches.
• វ៉ាត់tage of the connected lamp must be greater than 5W for proper operation.
• Only supports 2.4 GHz Wi-Fi networks. 5 GHz networks are not supported.
• Install the included capacitor to ensure proper functionality, especially in no-neutral wire setups.
• កុំដំឡើងក្នុង ឃamp បរិស្ថាន។
• Do not exceed the maximum load specified in the product specifications.
• Use English letters and numbers when naming your Wi-Fi router to ensure the Smart Device recognizes it.

Image: Key attention points for installation and compatibility.

3. លក្ខណៈបច្ចេកទេស

4. ការណែនាំតំឡើង

4.1 Tools Used

The following tools are typically used for installation:

• អ្នកកាត់ខ្សែ
• កាសែតអគ្គិសនី
• ស្ថានីយខ្សែភ្លើង
• Electric pen (voltage អ្នកសាកល្បង)

Image: Essential tools for smart switch installation.

4.2 ជំហានដំឡើង

1. បិទថាមពល៖ Locate your circuit breaker panel and turn off the circuit breaker controlling the light switch you intend to replace. Verify power is off using an electric pen or voltagអ្នកសាកល្បង។
2. យកកុងតាក់ចាស់ចេញ៖ Carefully remove the faceplate and mounting screws of the existing switch. Gently pull the old switch out from the wall box.
3. កំណត់អត្តសញ្ញាណខ្សែ៖ Identify the Live wire (L) and the Lamp wire(s) (L1, L2, L3) connected to your existing switch. This switch does not require a Neutral wire at the switch box.
4. ភ្ជាប់កុងតាក់ថ្មី៖ Connect the Live wire to the 'L' terminal on the MOES Smart Switch. Connect the Lamp wire(s) to the corresponding 'L1', 'L2', 'L3' terminals. Ensure all connections are secure.
5. Install Capacitor: The capacitor must be wired to the L1 position (lamp wire 1) at the light fixture. Connect one end of the capacitor to the neutral wire of the lamp and the other end to the lamp wire connected to L1. This is crucial for stable operation in no-neutral wire systems. If the lighting bulb still flickers, check the load power of the bulb or consider if another capacitor is required for wiring together.
6. កុងតាក់ម៉ោន៖ Carefully push the wired smart switch back into the wall box. Secure it with the provided screws. Attach the new faceplate.
7. ស្តារថាមពលឡើងវិញ៖ បើកឧបករណ៍បំបែកសៀគ្វីឡើងវិញ។

Image: Detailed wiring diagram for the smart switch, including capacitor installation.

រូបភាព៖ ឧamples of horizontal and vertical installation to suit different styles.

4.3 ការណែនាំអំពីការដំឡើងវីដេអូ

Video: A comprehensive guide to installing the single live wire smart switch.

5. ការដំឡើង និងការផ្គូផ្គង

៤.១ ការដំឡើងកម្មវិធី

Download the 'Smart Life' or 'Tuya Smart' app from your mobile device's app store (Google Play Store for Android, Apple App Store for iOS).

៦.១ ការផ្គូផ្គងវ៉ាយហ្វាយ

Open the app and follow the on-screen instructions to add a new device. Ensure your phone is connected to a 2.4 GHz Wi-Fi network. The switch will enter pairing mode when powered on for the first time or after a reset.

5.3 Resetting Wi-Fi Code

To reset the Wi-Fi code and enter pairing mode:

1. Press the switch button for 6 times.
2. Hold on the 6th time.
3. Release until you hear

   Ask a question about this manual

   Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

   ឈ្មោះ អ៊ីមែល

   សំណួរ ព័ត៌មានលម្អិត Submit question