DeltaTrak 15051 Ultra Fast Fold Thermometer User Manual

1. សេចក្តីផ្តើម

The DeltaTrak 15051 Ultra Fast Fold Thermometer is engineered for rapid and accurate temperature measurements, making it suitable for demanding applications such as food operations. Its design prioritizes speed, reliability, and flexibility to meet stringent safety standards. This manual provides essential information for the proper use and maintenance of your thermometer.

2. ព័ត៌មានសុវត្ថិភាព

• កុំជ្រលក់ទែម៉ូម៉ែត្រទាំងមូលក្នុងទឹក។ The probe is waterproof, but the main unit should not be submerged.
• ទុកទែម៉ូម៉ែត្រឱ្យឆ្ងាយពីកុមារ។
• Handle the stainless-steel probe with care as it has a sharp tip.
• កុំ​ដាក់​ទែម៉ូម៉ែត្រ​ក្នុង​សីតុណ្ហភាព​ខ្លាំង​នៅ​ក្រៅ​ជួរ​ប្រតិបត្តិការ​របស់​វា (-58°F ដល់ 572°F / -50°C ដល់ 300°C)។
• Always clean the probe before and after each use to prevent cross-contamination.

3. មាតិកាកញ្ចប់

• 1 x DeltaTrak 15051 Ultra Fast Fold Thermometer
• ថ្ម 1 x (ដំឡើងជាមុន)

4. ផលិតផលលើសview

The DeltaTrak 15051 features a large LCD display, a foldable stainless-steel probe, and intuitive buttons for various functions.

Image: DeltaTrak 15051 Ultra Fast Fold Thermometer. The thermometer is white and blue, with a digital display showing '190.6' and buttons for °F/°C, CAL, HOLD, MIN, and MAX. The stainless steel probe is extended from the main unit.

សមាសធាតុសំខាន់ៗ៖

• Foldable Stainless-Steel Probe: Adjustable from 0° to 180° for flexible positioning.
• អេក្រង់ LCD៖ Large, easy-to-read display for temperature readings.
• ប៊ូតុង °F/°C៖ Toggles between Fahrenheit and Celsius units.
• ប៊ូតុង CAL៖ For calibration (refer to calibration section for details).
• សង្កត់ប៊ូតុង៖ Freezes the current temperature reading on the display.
• MIN/MAX Button: Displays the minimum and maximum temperatures recorded during a measurement session.

5. រៀបចំ

The DeltaTrak 15051 thermometer comes with a pre-installed battery. No initial setup is typically required beyond removing any protective packaging.

1. Carefully remove the thermometer from its packaging.
2. Unfold the stainless-steel probe to activate the thermometer. The display will turn on automatically.
3. Ensure the display shows a reading. If not, check the battery compartment.

6. សេចក្តីណែនាំប្រតិបត្តិការ

១. ការវាស់សីតុណ្ហភាព

1. លាត​ឧបករណ៍​ស្ទង់​ដើម្បី​បើក​ទែម៉ូម៉ែត្រ។
2. Insert the stainless-steel probe into the center of the food or liquid being measured. Ensure the probe tip is fully immersed and not touching the bottom or sides of the container.
3. Wait for the reading on the LCD display to stabilize. The thermometer provides an almost instantaneous response, typically under 4 seconds.
4. អានសីតុណ្ហភាពដែលបានបង្ហាញ។
5. To turn off the thermometer, fold the probe back into its housing.

6.2. Switching Temperature Units (°F/°C)

ចុច °F/°C button located on the front of the thermometer to switch between Fahrenheit and Celsius temperature scales.

៤.៤. ដោយប្រើមុខងារ HOLD

ចុច កាន់ button to freeze the current temperature reading on the display. This is useful when you need to remove the probe from the item to read the temperature more clearly. Press កាន់ again to resume live temperature measurement.

6.4. Using the MIN/MAX Function

ចុច MIN / MAX button to cycle through the minimum and maximum temperatures recorded since the thermometer was last turned on or the MIN/MAX memory was cleared. To clear the MIN/MAX memory, hold the MIN / MAX button for a few seconds until the display resets.

6.5. Calibration (CAL)

The thermometer is factory calibrated. If recalibration is necessary, refer to specific industry standards or contact DeltaTrak support for guidance. Typically, calibration involves placing the probe in an ice bath (0°C / 32°F) and adjusting the reading using the កាល់ ប៊ូតុងប្រសិនបើចាំបាច់។

7. ការថែទាំនិងការថែទាំ

• ការសម្អាត៖ The probe can be cleaned with warm soapy water or an antibacterial wipe. The main unit should be wiped clean with a damp ក្រណាត់។ Do not wash the entire unit under running water or immerse it.
• ការផ្ទុក៖ Store the thermometer with the probe folded in a clean, dry place when not in use.
• ការជំនួសថ្ម៖ When the display becomes dim or the thermometer does not turn on, it's time to replace the battery. The thermometer uses a standard button cell battery. Open the battery compartment, replace the old battery with a new one of the same type, and close the compartment securely.

8. ការដោះស្រាយបញ្ហា

9. លក្ខណៈបច្ចេកទេស

10. ការធានា និងការគាំទ្រ

For warranty information and technical support, please refer to the official DeltaTrak webគេហទំព័រ ឬទាក់ទងសេវាកម្មអតិថិជនរបស់ពួកគេដោយផ្ទាល់។ រក្សាបង្កាន់ដៃទិញរបស់អ្នកជាភស្តុតាងនៃការទិញ។