KKSB 7350001161778 Raspberry Pi 5 Case
This document contains important technical and safety information about the device, its safe use, and installation.
Specifications
- Product Name: KKSB Raspberry Pi 5 Case for HATs and Coolers
- EAN: 7350001161778
- Compatibility: Designed for Raspberry Pi 5, HATs, Add-on Boards, Coolers, NVMe HATs
- Features: Removable cover, space for HATs and coolers, easy modification for HAT connectors
- Standards: RoHS Directive compliant
Product Usage Instructions
Refer to the assembly instructions provided by KKSB Cases for detailed steps on how to assemble the case.
Product Introduction
KKSB Raspberry Pi 5 Case with Space for HATs, Add-on Boards, Cooler, and NVMe HATs. Designed with functionality and versatility in mind, this case offers a range of features to enhance your Raspberry Pi experience. The case’s cover is removable, making it easy to set up the cooler and install the HAT without having to struggle with limited space. Additionally, the side walls are designed for easy modification to accommodate different HAT connectors, offering flexibility for various projects.
Note: Compatible accessories, cooler, HATs, add-on boards, and Raspberry Pi 5 are NOT included.
Detailed Product Information
https://kksb-cases.com/products/kksb-raspberry-pi-5-case-with-space-for-hats-addon-boards-and-cooler
How to Assemble the KKSB Cases
ttps://kksb-cases.com/pages/assembly-instruction-kksb-raspberry-pi-5-case-for-hats-and-coolers
Installation
- Remove the cover of the case to access the interior space.
- Place your Raspberry Pi 5 board inside the case.
- If using a cooler, follow the cooler installation instructions provided separately.
- If adding HATs or other accessories, ensure they fit properly and securely in the designated spaces.
- Close the cover of the case securely.
Standards for Inclusion: RoHS Directive
This product meets the requirements of the RoHS Directive (2011/65/EU and 2015/863/EU) and the UK RoHS Regulations (S.I. 2012:3032).
Disposal and Recycling
To protect the environment and human health, and to conserve natural resources, you must dispose of the KKSB Cases responsibly. This product contains electromechanical components that can be harmful if not disposed of properly.
- Do not dispose of the KKSB Cases as unsorted municipal waste.
- Take the module to a designated electronic waste (e-waste) recycling facility.
- Do not incinerate or dispose of the module in regular household waste.
By adhering to these disposal and recycling guidelines, you can help ensure that the KKSB Cases are disposed of in an environmentally responsible manner.
WARNING
- Keep small parts away from children under 3 years old to avoid choking hazards.
- Do not make any changes or modifications to the case that are not approved by the manufacturer, as it may void the warranty.
Manufacturer: KKSB Cases AB, Brand: KKSB Cases
Address: Hjulmakarevägen 9, 443 41 Gråbo, Sweden Tel: +46 76 004 69 04
E-mail: support@kksb.se
Official website: https://kksb-cases.com/
Changes in the contact information data are published by the manufacturer on the official website.
FAQs
Q: Are the Raspberry Pi 5 board, coolers, HATs, and add-on boards included with the case?
A: No, the KKSB Raspberry Pi 5 Case does not include the Raspberry Pi 5 board, coolers, HATs, or add-on boards. They need to be purchased separately.
Q: Is the case compliant with environmental regulations?
A: Yes, the product meets the requirements of the RoHS Directive and UK RoHS Regulations for environmental protection.
Documents / Resources
 | KKSB 7350001161778 Raspberry Pi 5 Case [pdf] User Manual 7350001161778 Raspberry Pi 5 Case, 7350001161778, Raspberry Pi 5 Case, Pi 5 Case |