Categories: Kimex

KIMEX 031-1220K2 Roller Stand Instruction Manual

KIMEX 031-1220K2 Roller Stand Instruction Manual

Read the entire instruction manual before beginning installation and assembly. If you have any questions regarding the instructions or warnings, please contact your local distributor for assistance.

WARNING

  • Use with products heavier than the rated weights may cause instability which may lead to injury.
  • Please follow the assembly instructions carefully. Incorrect installation can lead to serious damage or injury! injury.
  • Appropriate safety equipment and tools must be used. This product should only be installed by professionals.
  • This product is designed to be installed on concrete walls or masonry walls.
  • Make sure that the support surface will safely support the combined weight of the equipment and all attached hardware and components.
  • Use the mounting screws provided and DO NOT OVER TIGHTEN THE mounting SCREWS.
  • This product contains small items which could present a choking hazard if swallowed. Keep these items out of the reach of children.
  • This product is intended for indoor use only. Using this product outdoors may cause product failure and injury

Recommended for installation

List of components

IMPORTANT: Make sure you have received all parts according to the component checklist before installation.
If any parts are missing or defective, contact your place of purchase for a replacement.

Package

M x2

Wx2

Assembly Instructions

Attach the wall plate to the mounting rail

Install the mouthpiece

Attach the mounting rail to the solid brick

Tilt adjustment

Secure the TV stand

Attach the TV stand to the rear flat screen

Attach the TV stand to the back of the screen

  • Choose the appropriate screws, washers and spacers (if necessary) according to the type of display.
  • Center the adapter brackets on the back of the display as shown, and screw the brackets to the display, being careful not to overtighten.

Hang the screen

Level adjustment

Secure with padlock

Maintenance

  • Check that the mount is safe and secure to use at regular intervals (at least every three months).
  • Please contact your distributor if you have any questions.

Documents / Resources

KIMEX 031-1220K2 Roller Stand [pdf] Instruction Manual
031-1220K2, Roller Stand, 031-1220K2 Roller Stand, Stand

Recent Posts

EMERSON Supervisory and E2E Controller Weather ADF and DSC Weather Extension Module Instruction Manual

Supervisory and E2E Controller Weather ADF and DSC Weather Extension Module Supervisory and E2E Controller…

7 mins ago

cybex Platinum Winter Footmuff User Manual

Platinum Winter Footmuff WARNING! EN · Always feel your child's neck to check its temperature:…

8 mins ago

K S 7686 Ground Spot LED Instruction Manual

7686 Ground Spot LED Grondspot | Rond Ø22,5 Led zwart - 7686 NL - Montage…

11 mins ago

testo 316i Gas Leak Detector Instruction Manual

316i Gas Leak Detector testo 316i gas leak detector 0560 3161 Instruction manual Contents Contents…

12 mins ago

LG 65UQ9000PUD UHD TV Instruction Manual

65UQ9000PUD UHD TV

13 mins ago

Ford 2016 Truck Explorer 2WD V6-3.5L Power Roof Opening Panel Instruction Manual

2016 Truck Explorer 2WD V6-3.5L Power Roof Opening Panel

13 mins ago