EXPERTS IN HEATING
Magnetic system filter Installation and servicing instructions
Keston magnetic system filter has been developed by the industry-leading and a multi-award-winning company that pioneered magnetic filtration.
The Keston magnetic system filter can be installed anywhere on the main circuit. However, to achieve the best level of protection for the boiler, it is recommended that a filter is installed after the last radiator and before the boiler.
The following instructions are designed to support engineers in the safe and effective installation and servicing of the Keston magnetic system filter and should be followed at all times.
Any queries should be directed to your supervisor or Keston direct on 01482 443005.
Position A is best practice, while B is suitable.
N.B. We firmly recommend the Keston magnetic system filter is installed and serviced by a qualified heating engineer.
Your system is protected by Keston magnetic system filter.
Annual service required alongside boiler.
Keston magnetic system filter incorporates a secure, quick-release, trigger which enables the filter to be removed and reinstalled in seconds.
The industry-leading connections are an integral part of the new Keston magnetic system filter design. They enable easy and speedy filter removal during annual servicing or undertaking a MagnaCleanse system flush. This also makes it ideal for systems where there is little room to install a filter.
The following instructions are designed to support engineers in the safe and effective servicing of the Keston magnetic system filter using the quick-release trigger.
Keston magnetic system filter
Keston magnetic system filter delivers exceptional domestic central heating system protection against the damaging effects of black iron oxide sludge and non-magnetic debris. The unique, full-flow, 22mm valves and increased filter capacity establish it as a leader in its class giving professional installers a dedicated filter for larger central heating systems.
IMPORTANT Always follow the Standard Electrical Best Practice guidelines when installing a Keston magnetic system filter. A copy of these guidelines can be found at www.hse.gov.uk/electricity
The inlet and outlet on Keston magnetic system filter are reversible and there is no flow restriction. Following installation, don’t forget to complete the warranty card. Alternatively, complete the registration online at keston.co.uk
This product is backed by a seven-year limited guarantee.
Documents / Resources
|Keston 211115 22mm Magnetic System [pdf] Instruction Manual|
211115, 22mm Magnetic System, 211115 22mm Magnetic System, Magnetic System, System